User manual PALSON NILO

[. . . ] Do not use extension cables or sockets with the wrong current rating. To unplug, pull on the plug, not the cord. Do not hold the plug or the steam cleaner with wet hands or operate with bare feet. Do not place any object in the openings. [. . . ] It must not be used on soft plastics, wood without an insulating layer or cold glass. WARNING: On surfaces that have been treated with wax or certain unwaxed floors, the steam may dull the gloss. Do not use on wood surfaces without an insulating layer as this may cause the wood to granulate. we recommend performing a trial cleaning on an isolated part of the surface to be cleaned. Also check the manufacturer's instructions for the care and use of the object to be cleaned. ASSEMBLY AND USE Do not plug the unit into a mains socket until Step 7. WARNING: After each use, press the steam production button until all the pressure has been released before removing the safety cap. (After using for the first time, place the device upside down to fully empty the heater). Fill the water container, included with the attachments, with water to the marked line, in one go. Use the funnel to pour the water into the heater. NOTE: Never place detergents, alcohol-containing products, aromatic products or descaling products in the product as this may damage it or make it unsafe for use. Use the following guidelines to couple the straight injector, the hose and the fabric attachment: Align the single mark on the attachment with the single mark on the cleaner. Press the attachment into the jointed injector until it connects with the cleaner's structure. Turn it clockwise until the single mark on the attachment is aligned with the double mark on the cleaner. To use the jointed injector, align the single marks on the attachment and the cleaner, press the attachment into the jointed injector until it covers the circular seal (See page 6). Now turn it clockwise until the single mark on the attachment is aligned with the double mark on the cleaner. These two attachments can be applied to the (cleaner's) jointed injector, the straight injector and the extension hose. Chose the desired angle and then press the attachment into the hexagon-shaped end of the injector. CAUTION: Do not use the glass-cleaning attachment on cold glass, as this can break the glass. There are two open clips on the rear edge of the fabric attachment and two hinges on the rear edge of the glass-cleaning attachment. Place the hinges on the open clips and then swing the glass-cleaning attachment upwards towards the bottom of the fabric attachment until the two parts connect. To remove the attachment, press your thumb against the glass-cleaning attachment's grip. [. . . ] straight injector Edges , windows , sills , cornices , tiles , mantelpieces. Angled injector Places that are difficult to reach, WCs, windows, sills. This attachment can be used with the other attachments. TROUBLE-SHOOTING NOTE: Unplug the power cord before performing maintenance. [. . . ]