User manual PALSON VAPORMATIK

[. . . ] Funnel Measuring jug Steam gun with hose and steam connector Accessory adaptor Adaptor for hard to reach areas Jet nozzle fitting Nylon fixed round brush Metal round brush 2 in 1 fitting (steam fitting) 2 in 1 fitting (window fitting) Cotton cloth Large cleaning mop Floor brush 3 Extension tubes Steam cleaner with plug and cable Locking mechanism Steam controller Luminous heating indicator Luminous operating indicator I/O button Before refilling the cleaner with water, leave to cool for 5 minutes. Our products are designed to attain the highest quality, functionality and design standards. We hope you enjoy your new VAPORMATIK professional steam cleaner from PALSON. 1 For the mains supply Make sure that the voltage indicated on the rating plate coincides with socket voltage before connecting the steam cleaner to the mains. [. . . ] Nevertheless, we recommend using the cloth to protect the floorings if these are sensitive surfaces such as wood or lino. Put the floor brush in the cleaning cloth and fix the material hanging underneath the cloth's clips on the right and left. Press the yellow support's insides, open the clips and fix the cloth into place (Fig. 7) and pull the brush down to remove it. NOTE: The floor brush comes with a separate connector for packaging reasons. Accessory adaptor The steam cleaner has several attachable accessories for more efficient and deeper cleaning of different surfaces. First assemble the accessory adaptor so that the fittings can be connected to the steam hose. The accessory adaptor can be directly fitted to the steam gun and the end of one or more extension pipes. Make sure you push the adaptor firmly down until it snaps into place (Fig. Adaptor for hard to reach areas The adaptor for hard to reach areas can be used separately for cleaning or assembled with one of the accessories. Push it into the accessory adaptor and firmly turn it a quarter of the way round in the direction of the arrow on it (Fig. To remove the adaptor, carry out the procedure the other way round: turn it a quarter of the way round in the opposite direction to the arrow and remove it pulling it downwards. 6 Jet nozzle Just push the jet nozzle firmly into the adaptor for hard to reach areas to connect it (Fig. This nozzle allows for easily cleaning hard to reach areas such as corners, joints and washbasins. 7 Brushes The two brush fittings are pushed firmly into the adaptor for hard to reach areas, like the jet nozzle. The round brush is suitable for difficult stains in tougher materials such as stainless steel or stone. The brushes are removed just by pulling them downwards. Firmly push it into the adaptor or hard to reach areas. Put the cotton cover onto the adaptor to get a more thorough cleaning and protect the work surface (Fig. Fix the window cleaner with the rubber scraper in the steam fitting with right angles if you are going to clean windows, mirrors or tiles (Fig. * Precaution: Glass may crack when subjected to heat. Heat the glass areas up before carrying out the steam cleaning, spraying steam in a wide arch at a distance of 20 - 25 cm. [. . . ] open the tank lid pushing it downwards and turning it to the left. * Warning: hot steam may come out when you open the tank. You can burn yourself on the screw top and the tank. Fill the water tank with the measuring jug and funnel (see section 3. [. . . ]