User manual PALSONIC MODEL 3420 BGS

[. . . ] In order to wipe dust off the picture tube or off the cabinet, you should remove the power plug from the wall outlet first. You can wipe lightly with a piece of dry, clean, soft cloth. Do not expose the TV set to rain or excessive moisture, to prevent tire disaster or electric shock. Avoid using the set in very warm or damp places. There exists High Voltage in this TV set. [. . . ] Press the or button to select and highlight AUTO MEMORY. POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!. . . . . . 2. Press the button to start the AUTO SEARCH. All active channels will be preset and stored into the memory automatically. After presetting, the TV will return to the first channel program. AUTO MEMORY 5 VHFH !!!!!!. . . . . . STOP 3. During the process of AUTO SEARCH, pressing the button on the remote controller will stop the process and the TV will return to the first channel program. 0 7 OPERATION Tuning in (continued) . . Use the MANUAL SEARCH function if desired channels can not be preset with the AUTOSEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions. To preset channels (Manual search) Manual search If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search. Enter into POS. MEMORY menu, press the or button to select and highlight POSITION. Press the or button to select a desired position number (from 00~99). Note: press the or button to select a channel number within 0. 7 second. Press and hold the or button for over 0. 7 second to select a decimal number. POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!. . . . . . 2. Press the or button to select and highlight SEARCH. Press the button to search channels from current channel to higher channel. Press the button to search channels from current channel to lower channel. When a channel is located, the searching stops, this channel is then memorized with the preset channel number. POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!. . . . . . Note: you can also make use of BAND selection to quicken the searching process in your desired band. Pressing the or button moves the band to the next step in the sequence below. POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY VHFL VHFH UHF !!!!!!. . . . . . 3. When you want to store another channel with another position, repeat steps 1 & 2 above. 8 OPERATION Tuning in (continued) To skip unneccessary position numbers and MFT (Manual Fine Tuning) To skip a position number After presetting the channels, you can skip unnecessary position numbers so that only the channels you want to watch are selected. MEMORY menu, select and highlight BAND VHFL SKIP OFF POSITION, then select the unwanted program number with the SEARCH DOWN MFT DOWN or button. AUTO MEMORY !!!!!!. . . . . . 2. Press the or button to move the cursor to "SKIP". Press the or button to select "SKIP ON" After completion of channel preset, the position number will then be skipped when you select channels with the CH button. If you want to skip other unwanted channels, repeat step 1 above to change the channel number. To restore a skipped position number Select the position number you want to restore. [. . . ] . Double images or "ghosts" Snowy picture The remote controller does not work . Even if the picture or the sound is normal, Be sure the power cord is plugged in. Contrast, colour, tint are not correctly adjusted Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc. Possible interference of electronic interference from another TV set, a computer, an electronics game machine, a broadcast station, etc. [. . . ]