User manual PALSONIC MODEL 3425G

[. . . ] OWNER'S MANUAL 34CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 3425G Type Tested Electrical Safety AS/NZS 3250 Lic 4163 Standards Australia APP No: N15957 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 Contents Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility. CONTENTS 1 2 4 4 5 6 7 7 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press VOL+ button to start Auto Search towards higher frequency; or press VOL- button to start Auto Search towards lower frequency. All active channels will be preset and stored into the memory automatically. After presetting, the TV will stop at the last channel program. Notes: 1. Before you start Auto Search, we strongly recommend you to set a proper Sound System according to your local area. Please refer to the steps of Sound System setting on page 14. During the process of AUTO SEARCH, pressing the MENU or CH+/- buttons will stop the process. Manual Search Use MANUAL SEARCH function if desired channels cannot be preset or if you would like to preset channels to specific position numbers one by one. 1 2 3 4 5 ! Notes: Press MENU button repeatedly to enter into Program menu page. Press CH+ or CH- button repeatedly to select Channel Number item. Press VOL+ or VOL- button to select a channel number (ranging from 0-254). Press CH+ or CH- button repeatedly to select Manual Search item. Press VOL+ or VOL-button to start program search manually. Pressing VOL+ the set searches towards higher frequency; Pressing VOL-, the set searches towards lower frequency; The search stops when a program found and this program will be stored in the specified position number. 1. Then you can select a proper sound system as follows. 1 2 3 Press MENU button repeatedly to enter into Program menu page. Press CH- button to select Sound System item. Press VOL+ or VOLbutton to select a proper sound system. Some models are with only one sound system and in this case the Sound System does not need to be adjusted. !Notes: When the set is in AV mode, only Colour System appears in Program menu page. Program Color System AUTO 14 Operations Channel Selection Channel Selection 1 Use Direct Channel Selector (0-9 and -/-- buttons) To select one-digit channel: Press -/-- button repeatedly to display "-". Press 0-9 direct channel selector. 8 To select two-digit channel: Press -/-- button repeatedly to display "--". -- Press 1-9 buttons. -1 Press 0-9 buttons. 18 To select three-digit channel: Press -/-- button repeatedly to display "--" --- -- 1 -16 168 Press 1-2 buttons. Press 0-9 buttons. Press 0-9 buttons. ! Notes: The maximum channel number is 254, the set does not act if the channel number you input is out of the range of 0~254. 2 3 Use CH+ or CH- button Press CH+ button, the channel number increases; Press CH- button, the channel number decreases. Use previous channel button Press this button to switch between the current channel and previous channel. 15 Operations Adjusting Picture Contrast/Colour/Brightness/Sharpness/Picture Mode Adjusting Picture 1 Press MENU button, the Picture menu page displays. 2 Press CH+ or CH- button to select item. 3 Press VOL+ or VOL- button to adjust. Item Contrast Color Brightness Sharpness Tint* VOLweaker paler darker softer purplish VOL+ stronger deeper lighter sharper greenish * Note: The item TINT is for NTSC only. The adjusted settings are stored in the user-set mode. There are three preset picture modes and one user-set picture mode. Press the | button to select a picture mode according to your favourites. 4 Press | Item button to select picture mode. Picture mode Standard 80 50 50 50 50 Vivid 100 50 80 50 50 Soft 50 50 30 50 50 Contrast Color Brightness Sharpness Tint !Notes: The above parameters maybe different in different models. In the user-set picture mode you can adjust picture according to your favourites. 16 Operations Sound Control Adjusting Volume/Muting the Sound 1 Use VOL+ or VOL- button. Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. [. . . ] Press again to remove the information from the display. HOLD When a Teletext page has sub-pages the screen will change automatically to display the next sub-page when it comes around. This button freezes the page on screen to prevent this. Sub-page may be identified by a number such as "2/3" on the page itself. [. . . ]