User manual PALSONIC MODEL 3498

[. . . ] Overheating can cause unnecessary damage and shorten the life of the set. Remember that to obtain the best performance and lasting satisfaction from your equipment : have it regularly maintained by a reliable service organisation: ensure that it is correctly used by all the family. Never let children push anything into holes or slots in the cabinet - this could result in an shock. electricguess or take chances with electrical equipment of any kind - it is better to be safe than Never sorry. ABOVE ALL:- . [. . . ] Press PSET (PRESET ON/OFF) button to exit preset mode. NOTE: During presetting, auto presetting will be cut off if any one of STAND BY button, PRESET ON/OFF button or AUTO PRESET button is pressed. . Press PSET (PRESET ON/OFF) button to set preset mode. * If "SKIP" displays on the screen, press "SKIP" button on the front panel to exit "SKIP" mode. SKIP llllllllllllll 8 SKIP llllllllllllll 8 VHFH 3. Press and hold MANUAL TUNING button until your desired program appears. VHFL VHFH UHF MFT VHFL VHFH UHF 5 4. Press PRESET ON/OFF button to exit preset mode. The searched program station has been memorised at the present channel position, 5. Repeat 1~ 4 steps to search another channel. NOTE : * If the same channel position is selected during repeat operation, the former memory will be erased. * If some channel position is tuned by MANUAL TUNING mode, AFC (automatic frequency control) function is defeated in this channel position. . FUNCTION: SKIP BUTTON: When CHANNEL SELECTOR button is used to select channels, the channel will be skipped if they are set to "SKIP" mode. For example: Set 2~7 channels to "SKIP" mode, the procedure of channel position increasing or decreasing. CHANNEL INCREASE CH 1 2 58 59 CH CHANNEL DECREASE (REMOTE) 1 2 58 59 (THE APPLIANCE) . Press PSET (PRESET ON/OFF) button to set preset mode. Select a channel by using CHANNEL SELECTOR button. Press "SKIP" button, "SKIP" will be displayed on the screen to indicate that the channel is at "SKIP" mode. SKIP llllllllllllll 4. Repeat 2 ~ 3 steps to skip another channel. Press PRESET ON/OFF button to exit preset mode. 3 SKIP . VOLUME CONTROL Press the Press the SOUND CONTROL: (VOL) button to increase volume; the red block on the screen moves right. (VOL) button to decrease volume; the red block on the screen moves left. . MUTE BUTTON (REMOTE CONTROL UNIT) When there is a phone-call or a visitor, it can temporarily shut off the sound without affecting the picture. To resume normal, press the MUTE or VOLUME ( ) button. The previous volume will be displayed for 4 seconds. 6 . [. . . ] Switch off the power before the setting time is up. TV/AV SELECTOR (REMOTE CONTROL . Press TV/AV button to change TV mode to AV mode, then UNIT) will be displayed in "VIDEO" . the upper comer of the screen for 4 seconds. Press TV/AV button again to return TV mode, the original channel will be displayed in the upper right comer of the screen. Set to TV mode when receiving or recording TV program. 9 TROUBLE SHOOTING GUIDE Many apparent malfunctions may be caused by slight misadjustment of regular controls or some other equally similar simple causes. [. . . ]