User manual PALSONIC MODEL 3499

[. . . ] OWNER'S MANUAL 34CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 3499 Type Tested Electrical Safety AS/NZS 3250 Lic 4163 Standards Australia APP No: N15957 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 Congratulations on your purchase of this colour Hi-Vision Palsonic television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. Contents NOTES FOR OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ANTENNA CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The moving bar indicates the change of tuning frequencies. * During presetting, auto presetting will be cut off if any one of STAND BY button, PRESET ON/OFF button or AUTO PRESET button is pressed. 3. 2. 2 MANUAL TUNING 3. 2. 2. 1 Press PRESET ON/OFF button to set preset mode. If "SKIP" displays on the screen, press "SKIP" button to exit "SKIP" mode. SKIP llllllllll. . . . . VHFH 8 SKIP lllllllll. . . . . UHF 8 VHFH 3. 2. 2. 3 Press and hold MANUAL TUNING button until your desired program appears. VHFL MFT VHFL VHFH UHF 3 3. 2. 2. 4 Press PRESET ON/OFF button to exit preset mode. The searched program station has been memorised at the present channel position, 3. 2. 2. 5 Repeat 1~ 4 steps to search another channel. NOTE : * If the same channel position is selected during repeat operation, the former memory will be erased. * If some channel position is tuned by MANUAL TUNING mode, AFC (automatic frequency control) function is defeated in this channel position. 3. 3 SKIP BUTTON 3. 3. 1 FUNCTION When CHANNEL SELECTOR ( )button is used to select channel, the channels will be skipped if they are set to "SKIP" mode. For example: Set 2~7 channels to "SKIP" mode, the procedure of channel position increasing or decreasing is as shown. CHANNEL INCREASE CH 1 8 9 99 0 CH CH CHANNEL DECREASE (REMOTE) 1 8 9 99 0 (THE APPLIANCE) 3. 3. 2 OPERATION: 3. 3. 2. 1 Press PRESET ON/OFF button to set preset mode. 3. 2. 2 Select a channel by using CHANNEL SELECTOR button. 3. 3. 2. 3 Press "SKIP" button, "SKIP" will be-displayed on the screen to indicate that the channel is at "SKIP" mode. SKIP llllllllllllll 3. 4 Repeat 2~3 steps to skip another channel. 5 Press PRESET ON/OFF button to exit preset mode. 3 SKIP 3. 4 CHANNEL SELECTION 3. 4. 1 This set is preset to Australia channels 2, 7, 9, 10, 28 on those numbers. If you wish to change the settings, or add more channels the method is quite straight forward. 3. 4. 2 Press CHANNEL SELECTOR ( )on the appliance, the channel number will be increased or decreased as shown in the following Fig. , and displayed in the upper right corner of the screen. 4 CHANNEL INCREASE CH 1 2 3 99 0 CH CH 8 CHANNEL DECREASE (REMOTE) 1 2 3 99 0 (THE APPLIANCE) 3. 5 VOLUME CONTROL 3. 5. 1. Press the VOL button to increase volume ; the green bar on the screen moves right. button to decrease volume ; the green bar on the screen moves left. Display of maximum volume Display of minimum volume . . . . . . . . . . . . . . . . . . . . . . . . . 3. 6 AV/TV SELECTOR Press AV/TV button to change TV mode to AV mode when the set is in receiving (TV) mode. On the contrary, press it to change AV mode to TV mode when the set is in VIDEO mode. 3. 7 TINT CONTROL Use this knob to control colour tone during reception of pictures when using the NTSC system. 5 4. REMOTE CONTROL OPERATION: REMOTE CONTROL UNIT : STANDBY 1 ~ 9 : DIGITAL CHANNEL SELECTOR 10/0 : CHANNEL 10 OR CHANNEL 0 SELECTOR SYSTEM : COLOUR SYSTEM CONTROL -/- : DIGIT OR TWO DIGIT CHANNEL SELECT : PREVIOUS : CHANNEL SELECTOR : VOLUME CONTROL : PERSONAL PREFERENCE SELECT (BRIGHTNESS, COLOUR) : PICTURE/TIME ADJUSTMENT PICTURE : PICTURE CONTROL DSP : DISPLAY CH VOL PPS 4. 1 INSTALLING BATTERIES: 4. 1. 1 Remove the battery cover of Remote Control Unit. 4. 1. 2 Insert two "AAA", 1. 5V batteries, making sure the polarity ( + or - ) of the batteries matches the polarity marks inside the unit. [. . . ] NOTE: The VCR signal can be input by antenna input socket of the TV set, but the quality of the picture and sound is not better than that of video mode. 5. 2. RECORDING FROM THE TV SET 5. 2. 1 The figure below shows how to connect the TV set to the VCR. 5. 2 Press AV/TV button of the TV set or on the remote control unit to set the set to TV mode, and choose the desired channel. Note: the following mis-operation should be avoided during recording. [. . . ]