User manual PALSONIC MODEL 5110PF

[. . . ] Contact a qualified service department in your local area. In order to wipe dust off the picture tube or off the cabinet, you should remove the power plug from the wall outlet first. You can wipe lightly with a piece of dry, clean, soft cloth. Do not expose the TV set to rain or excessive moisture, to prevent tire disaster or electric shock. Avoid using the set in very warm or damp places. [. . . ] Note: press the or button to select a channel number within 0. 7 second. Press and hold the or button for over 0. 7 second to select a decimal number. POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!. . . . . . 2. Press the or button to select and highlight SEARCH. Press the button to search channels from current channel to higher channel. Press the button to search channels from current channel to lower channel. When a channel is located, the searching stops, this channel is then memorised with the preset channel number. POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!. . . . . . Note: you can also make use of BAND selection to quicken the searching process in your desired band. Pressing the or button moves the band to the next step in the sequence below. POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY VHFL VHFH UHF !!!!!!. . . . . . 3. When you want to store another channel with another position, repeat steps 1 & 2 above. 8 OPERATION Tuning in (continued) To skip unnecessary position numbers and MFT (Manual Fine Tuning) To skip a position number After presetting the channels, you can skip unnecessary position numbers so that only the channels you want to watch are selected. MEMORY menu, select and highlight BAND VHFL SKIP OFF POSITION, then select the unwanted program number with the SEARCH DOWN MFT DOWN or button. AUTO MEMORY !!!!!!. . . . . . 2. Press the or button to move the cursor to "SKIP". Press the or button to select "SKIP ON" After completion of channel preset, the position number will then be skipped when you select channels with the CH button. If you want to skip other unwanted channels, repeat step 1 above to change the channel number. To restore a skipped position number Select the position number you want to restore. Press the or button to select "SKIP OFF". MFT (Manual Fine Tuning) POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!. . . . . . button to move the cursor to When sound and picture's effect of a channel is poor (for example: one or two CATV channel's sound and picture are not standard), you can correct them by making use of Manual Fine Tuning). Enter into POS. MEMORY menu, select the channel you want to manually fine tune. POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!. . . . . . 2. Press the or button to select and highlight MFT, then press the or button, the channel begins fine tuning until the optimum picture and sound is achieved. Note: if some channel's colour is abnormal, it may be that the setting of the colour system is wrong, please do adjustment according to The setting of colour (on page 10) to set the colour system. To exit the menu, press the MENU button repeatedly. POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!. . . . . . 9 OPERATION Tuning in (continued) The setting of colour and sound system 1. Press the P. S button to select the desired picture quality. MEMORY1, MEMORY2, MEMORY3 and MEMORY 4 (user-set) can be selected cyclically. MEMORY 1 MEMORY 2 MEMORY 3 MEMORY 4 PICTURE COLOR BRIGHT CONT SHARP BB SELECT PICTURE COLOR BRIGHT CONT SHARP BB SELECT To set the desired picture quality to the MEMORY position 1. Press the MENU button to enter into the PICTURE menu. [. . . ] . Double images or "ghosts" Snowy picture The remote controller does not work . Even if the picture or the sound is normal, Be sure the power cord is plugged in. Contrast, colour, tint are not correctly adjusted Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc. Possible interference of electronic interference from another TV set, a computer, an electronics game machine, a broadcast station, etc. [. . . ]