User manual PALSONIC MODEL 5120 BGS

[. . . ] OWNER'S MANUAL ART SERIES 51CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 5120G 5120B 5120S Type Tested Electrical Safety AS/NZS 3250 Lic 4164 Standards Australia APP No: N17340 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents INTRODUCTION Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 NOTES FOR OPERATION Cautions for safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 OPERATION INSTALLATION Antenna connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 APPEARANCE Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Back view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Remote controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Turning the Power On/Off. . . . . . . . . . . . . . . . . . . . 6 Menu Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Tuning in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 To preset channels (ASM). . . . . . . . . . . . . . . . . . . . . . . . . 7 To preset channels (SEARCH). . . . . . . . . . . . . . . . . . 7 To skip unnecessary position numbers. . . . . . 9 MFT (Manual Fine Tuning). . . . . . . . . . . . . . . . . . . . . . 9 AFT (Automatic Frequency Tuning). . . . . . . 10 The setting of colour and sound system. . 10 Channel selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Convenient Picture and Sound Control. . . . 12 CLOCK setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SYSTEM setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Playing Games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Sleep timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Other functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 CALENDAR function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 CHILD LOCK setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 CHANNEL SWAP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Super receiving function. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Progam Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 CONNECTING OTHER EQUIPMENT External Equipment Connections. . . . . . . . . . . 19 Video playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Recording TV program. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 OTHERS Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 INTRODUCTION Features . . Hyperband English/Chinese on-screen menu display 256 preset channels Intellectualized I C-bus control Full function remote control Sleep timer, ON Timer, OFF Timer Non-signal blue background display and AUTO-POWER-OFF function Games, built-in 500 year calendar function Child Lock function, Channel swap Program scan function Program scan function Five picture modes' setting AUDIO/VIDEO input & output terminals Advanced digital picture improvement circuit 2 1 NOTES FOR OPERATION * Do not let the TV set be in stand-by condition for a long period of time. [. . . ] Press the VOL- button to decrease the sound. Press the VOL+ button to increase the sound. VOLUME 32 To mute the sound The muting function is convenient when you need to pay attention to surrounding sounds, answer a phone call, receive a visitor, etc. To restore the sound, press the button again or VOL+/- buttons. MUTE 35 12 OPERATION CLOCK SETTING CLOCK menu Press the CLOCK button to display the CLOCK menu. (Or press the MENU button repeatedly to select and highlight CLOCK icon, and press VOL+/- button to enter into the CLOCK menu. ) TIME setting Making use of this function can set the current time for the TV. Press the POS+/- button to select and highlight TIME. Press the VOL- button to set the hour (0~23). Press the VOL+ button to set the minute (00~59). CLOCK TIME 18:23 OFF-TIME --:-ON-TIME --:-POS CLOCK TIME --:-OFF-TIME --:-ON-TIME --:-POS - OFF-TIME setting Making use of this function can automatically turn off the TV at a preset time, and bring the set to standby mode. Press the POS+/- button to select OFF-TIME. Press the VOL- button to set the hour (0~23) press the VOL+ button to set the minute (00~59). Once the preset time has elapsed, the TV will automatically go into standby mode. CLOCK TIME 18:24 OFF-TIME 22:50 ON-TIME --:-POS - ON-TIME setting Making use of this function can automatically turn on the TV at a preset time to a preset channel. CLOCK TIME 18:25 OFF-TIME 22:50 ON-TIME 19:00 POS - Press the POS+/- button to select ON-TIME. Press the VOL- button to set the hour (0~23), press the VOL+ button to set the minute (00~59). Press the POS+/- button to select POS. , press the VOL+/button to set the TV ON position number. (Or you can press 0~9, --/--- button to set the position number). Press the button to switch the TV to standby mode. At the preset time, the TV will turn on automatically to the preset channel. CLOCK TIME 18:24 OFF-TIME 22:50 ON-TIME --:-POS 10 Note: Once the function of ON/OFF TIMER has been fulfilled, next when you want to use the function once more, you should set them again. 13 OPERATION System setting SYSTEM menu Press the MENU button repeatly to select and highlight the SYSTEM icon. Press the VOL+ button to enter into the menu of SYSTEM. SYSTEM To select the language for the OSD (on-screen display) Making use of this function can switch the language for the OSD to either English or Chinese. To switch the OSD language from English to Chinese, press POS+/- button to select CHINESE ( ), press VOL+ button, the screen menu is automatically displayed in Chinese. To switch the OSD language from Chinese to English, press POS+/- button to select (ENGLISH) press VOL+ button, the screen menu is automatically displayed in English. B/B (blue background) setting With the B/B (blue background) function ON, the TV will automatically turn blue when no signal is being received. [. . . ] Press SCAN button again, the screen will settle at the current scanned program. 7 SCAN 14 18 CONNECTING OTHER EQUIPMENT External Equipment Connections This set is incorporated with Audio & Video input and output terminals which allow direct connection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc. ) for playing back and recording the programs. Refer to the owner's manual of the equipment to be connected as well. Video playback The figure below shows how to connect the TV set to the video equipment. Or you could use another group of AV IN terminals on the front cabinet as follows. Note: As regards the AV input terminals, connect either the front or rear terminals but not both. Press the "AV/TV" button on the remote controller to select AV mode, "AV" and corresponding colour system will be displayed on the screen. The picture displayed on the screen is the program played back by the video equipment. Recording TV program The figure below shows how to connect the TV set to the VCR Press AV/TV button on the remote control unit to set the TV receiver to TV mode, and choose the desired channel. [. . . ]