User manual PALSONIC MODEL 6820PF

[. . . ] OWNER'S MANUAL PURE FLAT AV STEREO TELEVISION 68CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 6820PF Type Tested Electrical Safety AS/NZS 3250 Lic 4166 Standards Australia APP No: N15899 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents INTRODUCTION Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 NOTES FOR OPERATION Cautions for safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 OPERATION INSTALLATION Antenna connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 APPEARANCE Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Back view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Remote controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 MENU INSTRUCTION Introducing the menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Turning the Power On/Off. . . . . . . . . . . . . . . . . . . . . . . . 7 Tuning in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 To preset channels (Auto Search). . . . . . . . . . . . . . . . . . 8 To preset channels (Manual Search). . . . . . . . . . . . . . 8 To skip unnecessary position numbers. . . . . . . . 10 MFT (Manual Fine Tuning). . . . . . . . . . . . . . . . . . . . . . . . . 10 The setting of colour and sound system. . . . . . . 11 Channel selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Convenient Picture Controls. . . . . . . . . . . . . . . . . . . . . . . . . . 13 Convenient Sound Control and Sleep Time. . 14 SYSTEM setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Special functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 CLOCK setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Channel reservation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 CONNECTING OTHER EQUIPMENT External Equipment Connections. . . . . . . . . . . . . . . . . 20 To connect AV input terminals. . . . . . . . . . . . . . . . . . . . . . 20 To connect MONITOR output terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 OTHERS Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 INTRODUCTION Features . . Hyperband English/Chinese on-screen menu display 256 preset channels Intellectualized I C-bus control Full function remote control ON Timer, OFF Timer Four picture modes' setting AUDIO/VIDEO input & output terminals S-VIDEO Terminal Program scan function Games calendar function Advanced digital picture improvement circuit Digital AFT technology Channel reservation 2 1 NOTES FOR OPERATION * Do not let the TV set be in stand-by condition for a long period of time. [. . . ] Using the CH buttons Press CH to select lower position numbers; CH to select higher ones. 1 3 2 After 2 seconds X-X X-XXXX X-XXXXX Using the PREVIOUS channel button ( ) 11 2 When there are no menus on the screen, pressing the button on the remote controller (below the MENU button) can swap the current viewed channel with the previous one. For example, the channel you previously watched is 11, the present channel is 2, press the button, it will return to channel 11, press the button again it will return to channel 2. Using the channel SCAN button Press SCAN button, the set will scan the channels from first channel to higher channels one by one, every program will be displayed for about 3 seconds and then go on scanning until all programs are scanned over and then return to your former viewed program. During the scanning, press SCAN button again, the set will return to your former viewed program. 12 OPERATION Convenient Picture Controls Selectable picture To select the picture mode You can select the picture quality instantly among three preset modes and one user-set mode. Press the P. S button to select the desired picture quality. BRILLIANT, NATURAL, MELLOW and PERSONAL (user-set) can be selected cyclically. BRILLIANT NATURAL MELLOW PERSONAL To set the desired picture quality to the PRESONAL position Press the MENU button to display the 1. Or press the P. M button, to call up PICTURE menu. COLOR BRIGHT CONT SHARP 76 75 100 50 2. Press the or button to select the desired adjusting item, and press the or button to adjust the level. SELECT ADJUST Pressing (PERSONAL) Item COLOR BRIGHTNESS CONTRAST SHARPNESS *TINT paler darker weaker softer purplish deeper lighter stronger sharper greenish BRILLIANT 75 75 100 50 NATURAL 50 50 90 40 MELLOW 50 50 70 30 * TINT is for NTSC system only. The adjusted level is stored in the PERSONAL position. 13 OPERATION Convenient Sound Controls and Sleep timer Adjusting the volume and muting the sound To adjust the volume Adjust the volume with the VOL buttons. Press the VOL button to decrease the sound. Press the VOL button to increase the sound. To mute the sound The muting function is convenient when you need to pay attention to surrounding sounds, answer a phone call, receive a visitor, etc. Press the MUTE button to mute the sound. MUTE 2. To restore the sound, press the MUTE button again or VOL buttons. Sleep timer SLEEP timer Making use of the Sleep timer function allows you to have the set automatically turned off after a preset time, and the TV set set to standby mode. Press the SLP button every time, the time displaying on the screen will change in the sequence below: SLEEP:30MIN. OFF 120MIN 110MIN. . . . . . . . . . 10MIN 14 OPERATION System setting SYSTEM SET Press the MENU button repeatedly to select and highlight the icon, and the SYSTEM SET menu appears on the screen automatically. LANGUAGE C. SYSTEM S. SYSTEM B. B. SET SELECT ADJUST ENG/ AUTO BG ON To select the language for the OSD Making use of this function can switch the language for the OSD to either English or Chinese. In the (SYSTEM SET) menu, press the or button to select LANGUAGE. Press the or button to select ENGLISH or " " (CHINESE). The selected language is displayed in front and the screen menu is automatically displayed in that language Colour system selection In (SYSTEM SET) menu, press the or button to select C-SYSTEM item. Press the or button to select proper colour system, AUTO, PAL, 443NTSC, 358NTSC can be selected cyclically (refer to setting of colour system on page 11). Blue background With the blue background function ON, the TV will automatically turn blue when no signal is being received. In (SYSTEM SET) menu, press the or button to select B/B SET. Press the or button to change the blue background setting ON or OFF. To exit the menu, press the MENU button repeatedly or wait for 15 seconds. LANGUAGE C. SYSTEM S. SYSTEM B. B. SET SELECT ADJUST ENG/ AUTO BG ON LANGUAGE C. SYSTEM S. SYSTEM B. B. SET SELECT ADJUST ENG/ AUTO BG ON LANGUAGE C. SYSTEM S. SYSTEM B. B. SET SELECT ADJUST ENG/ AUTO BG ON Note: If the receiving signals are weak or are not standard, please set the B. B. SET to OFF, otherwise blue back will appear on the screen or the program will be lost. 15 OPERATION Special functions CALENDAR function(1800-2200) Enter into the (SPECIAL FUNCTION) menu, press the or button to select CALENDAR, press the or button to enter into calendar interface. [. . . ] To exit the menu, press the MENU button repeatedly or wait for 15 seconds. To fulfill the RESERVE function, you should set the time firstly, the set the reserved channel. Once the RESERVE function has been fulfilled, next when you want to use the function once more, you should set them again. TIME CHANNEL 19:28 005 TIME CHANNEL 19:28 000 TIME CHANNEL OFF -- SELECT SET SELECT SET SELECT SET 19 CONNECTING OTHER EQUIPMENT External Equipment Connections . The following describes how to use and connect the TV with other AV equipment. Refer to the owner's manual of the equipment to be connected as well. To connect AV input terminal You can connect video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound. [. . . ]