User manual PALSONIC MODEL 6850TGPF

[. . . ] OWNER'S MANUAL 68CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 6850TGPF Type Tested Electrical Safety AS/NZS 3250 Lic 4166 Standards Australia APP No: N15899 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 Contents Congratulations on your purchase of this Palsonic colour television. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this equipment. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Some models are only with one sound system and in this case the Sound System does not need to be adjusted. English Language On Blue back 50 Rotate Off Child lock Auto Color system B/G Sound system P- - + 16 Channel edit Program delete After presetting the channels, you may delete unnecessary programs so that only the programs you want to watch are selected. 1 ? i Use digit buttons or channel up/down button to select a program you want to delete (for example: program 3). Program P+ 1 4 7 2 5 8 0/AV + CH VOL VOL 3 6 9 --/--- 2 Digit buttons Press MENU repeatedly to display Program menu. Press CH+/- to select Program 003 item. P- Automatic tuning Manual tuning 001 002 Program 003 004 005 - + 3 4 Press the RED button to delete the program. Please wait for some time until the "Program 003" menu item does not glitter (for the system needs time to delete program). Now channel 3's program is deleted, and channel 4's program move to channel 3, and so on. Program P+ MENU CH+/(menu item select) VOL+/(menu item adjust) K CH + - HOTEL S. M P. M LOCK O * To exit the menu, press OK button. M EN U OK (exit the menu) 5 + SOUND + RED button If you want to delete other programs, highlight Program 003 item and press VOL+ button and a small block appears near 003. P- Automatic tuning Manual tuning 001 002 Program 003 004 005 - + Program + 6 P+ Now press CH+/- button to select the program number you want to delete, then press RED button to delete. P- Automatic tuning Manual tuning 001 002 Program 003 004 005 - + 17 Channel edit Program sort You can sort programs in your favourite order. 1 ? Select the program you want to move using channel select buttons (for example: program 3). Press MENU repeatedly until Program menu appears. Program i 2 3 3 6 9 --/--- Press CH+/- to select Program 003. Press VOL-, 003 changes to <003. P+ 1 4 7 2 5 8 0/AV + CH VOL VOL 4 Digit buttons 5 6 P- Automatic tuning Manual tuning 001 002 Program < 003 004 005 - + Press CH+/- to select the new number, for example 001. Repeat the above steps to sort the programs in your favourite order. Program P+ MENU CH+/(menu item select) VOL+/(menu item adjust) K O P- Automatic tuning Manual tuning 001 > 002 Program < 003 004 005 * To exit the menu, press OK button. M EN U - + CH + - Program name If required, you can give a name to the programs. Note: If current program is Teletext, it can be automatically named by the unit according to its information. HOTEL S. M P. M LOCK OK (exit the menu) + SOUND + 1 + In Program menu, highlight Program 003, press VOL+ button and a small block appears near 003. Now press CH+/- to select program to name or rename. (Or you can directly select the program (for example: program 3) you want to name using the channel select buttons, then enter into the Program menu and highlight Program 003, then press VOL+). Press VOL+ again and an arrowhead appears near the small block. Use VOL+/- to move around the name display area (5 characters) and CH+/- to select the character. When the name has been entered, use VOL- to exit. The name is stored. Program P+ 2 3 4 5 P- Automatic tuning Manual tuning TF1 001 FR2 002 Program 003 CCT 004 005 - + Repeat steps above for each program you wish to name 18 Channel selection 1 Use Direct Channel Select buttons To select one-digit channel: Press --/--- button to display "-", then input the number. Press "--/---" button ? - Press 0-9 button 5 i To select two-digit channel: 1 4 7 2 5 8 0/AV + CH VOL VOL 3 6 9 (Digit select) --/--- Press --/--- button to display "--", then input the number. Digit buttons Press "--/---" button Press 0-9 button Press 0-9 button -- 5- 56 To select three-digit channel: K Press --/--- button to display "---", then input the number. CH+/(Channel up/down) --1-15156 (Previous program) HOTEL CH + - O M EN U S. M LOCK P. M Press "--/---" button Press 0-2 button Press 0-9 button Press 0-9 button * In this model the maximum channel number is 255. + SOUND + 2 Retain on-screen display) Use CH+ or CH- button Press CH+ button, the channel number increases; Press CH- button, the channel number decreases. + 3 Use previous program button ( ) Press this button to switch between the current program and the previous one. Notes: Use on-screen display button ( the current channel number Press this button to display the current TV state. If in TV program viewing, then it will display the current channel number, colour system, sound system and sound mode. Press it again to cancel the display. + ) to know 12 Auto B/G 19 Picture adjustment To select the picture mode You can select the picture quality instantly among three preset modes and one user-set mode. ? Picture mode Standard Picture mode Dynamic i Press the P. M button to select the desired picture quality. Standard, Dynamic, Mild and Favourite (user -set) can be selected cyclically. Picture mode Mild Picture mode Favourite 1 4 7 2 5 8 0/AV + CH VOL VOL 3 6 9 --/--- MENU CH+/(menu item select) VOL+/(menu item adjust) K Mode Standard Dynamic Mild Favourite Picture quality Display normal pictures Display more brightness and contrast pictures Display mild pictures The picture quality you set CH + - O * To exit the menu, press OK button. M EN U HOTEL S. M Picture adjustment LOCK P. M OK (exit the menu) P. M (Picture mode select) 1 Press MENU to display Picture menu. Picture P+ + SOUND + 2 Press CH+ or CH- to select desired adjusting item. 3 Press VOL+/- to adjust. Item Contrast Brightness Colour Sharpness Tint* SVM Contrast Brightness Colour Sharpness Tint SVM On P- - + + VOLVOL+ weaker stronger darker lighter paler deeper softer sharper purplish greenish High/Mid/Low/Off Notes: Tint is only for NTSC system. Turning on SVM will greatly improve picture's sharpness. * SVM is an optional function. 20 Sound controls Adjusting volume 1 Use VOL+ or VOL- button. ? i Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. (Sound mute) Volume 1 4 7 2 5 8 0/AV + CH VOL VOL 3 6 9 --/--- 2 Use MUTE button. If you want to mute the sound, press button on the remote. To resume the sound, press this button again. X MENU CH+/(menu item select) VOL+/(volume adjust menu item adjust) LOCK O K * To exit the menu, press OK button. M EN U CH + - Adjusting sound HOTEL S. M P. M OK (exit the menu) 1 Press MENU repeatedly to display Sound menu. Sound 2 Press CH+ or CH- to select P+ desired adjusting item. + SOUND + 3 Press VOL+/- to adjust the level. P- Volume Bass Treble Balance DBE MSS Off Off - + + Item Volume Bass Treble Balance DBE (Dynamic bass enhanced) MSS (Micronas surround sound) VOLweaker weaker weaker decrease the right channel VOL+ stronger stronger stronger decrease the left channel ON/OFF ON/OFF The adjusted level is stored in the Favourite position. Note: DBE/MSS function are optional function. 21 Sound controls Sound mode selection You can select the sound quality instantly among three preset modes and one user-set mode. [. . . ] Contrast, colour tint are not correctly adjusted Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc. Possible interference of electronic interference from another TV set, a computer, an electronics game machine, a broadcast station, etc. This may be caused by reflections from nearby mountains or buildings. It is possible that the aerial "lead-in" is damaged or comes off. [. . . ]