User manual PALSONIC MODEL 6860PFST

[. . . ] OWNER'S MANUAL 68CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 6860PFST Type Tested Electrical Safety AS/NZS 3250 Lic 4166 Standards Australia APP No: N15900 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 Contents Congratulations on your purchase of this Palsonic colour television. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this equipment. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you want to skip other unwanted channels, repeat the above steps. Note: you can select the skipped channel by pressing the direct channel select buttons. SCAN MUSIC To restore a skipped channel Menu control buttons Enter into Preset menu, select the program number you want to restore. Press P- or P+ to select SKIP, press V- or V+ to select SKIP OFF. Manual Fine Tuning Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning. 1 Select the channel you want to fine-tune. 2 * To exit the menu, press CALL button or repeatedly press MENU button. Enter into Preset menu, press Por P+ to select FlNE TUNING, then press V+ to enter into the sub-menu. Preset PROGRAM AUTO STORE SEARCH FINE TUNING PROG EDIT SKIP 1 ON 3 In FlNE TUNING sub-menu, press P- or P+ to select TUNING, then press and hold V+ or V- to fine tune to obtain best possible picture and sound. Preset * FINE TUNING * PROGRAM 2 COLOR SYSTEM AUTO SOUND SYSTEM B/G TUNING 14 Channel selection You can select your desired TV program by one of the following methods. Use Direct Channel Select buttons TV/AV To select one-digit channel: GAME Press 0-9 button directly. Direct channel select buttons 1 4 7 0 2 5 8 3 ZOOM 6 CALL Press 0-9 button 5 9 MUTE CALL To select two-digit channel: Press -/-- button to display "--" then input the number. Press "-/--" buttons Press 0-9 buttons Press 0-9 buttons SCAN -- 5- 56 MUSIC To select three-digit channel: Press -/-- button to display "1--", then input the number. P+ 1-15156 P- Press -/-- button Press 0-9 button Press 0-9 button * In this model the maximum channel number is 199. Use Program up/down buttons Press P+ button, the channel number increases; Press P- button, the channel number decreases. Use Previous program button Press button to switch between the current program and the previous one. Notes: Use CALL button to know the current channel number. Press CALL button to display the current TV state. If in TV program viewing, then it will display the current channel number, colour system, sound system and audio mode. If you have set sleep timer, the remaining time will also be displayed. 15 12 AUTO B/G FM 60 Channel edit You can edit the channel programs in your favourite order. Channel edit TV/AV 1 Press MENU repeatedly to display Preset menu. 2 Press P+ or P- to select PROG EDIT. CALL Preset PROGRAM AUTO STORE SEARCH FINE TUNING PROG EDIT SKIP 4 GAME 1 4 7 0 2 5 8 3 ZOOM ON 6 CALL 9 MUTE 3 Press V+ to enter into EDIT PROG sub-menu. Press V+ or V- to select a program number which you want to swap. Preset * EDIT PROG * PROGRAM TO SWAP 4 10 SCAN MUSIC press V+ select 5 Select TO item, you want toor V- toto. a program number which swap and press V+ to confirm. 6 Highlight SWAPprograms' contents are swapped. Now these two Menu control buttons Repeat the above steps to edit the programs in your favourite order. * To exit the menu, press CALL button or repeatedly press MENU button. 16 Picture adjustment To select the picture mode You can select the picture quality instantly among three preset modes and one user-set mode. Press button to select the desired picture quality. MILD, DYNAMIC, STANDARD and USER (user-set) can be selected cyclically. Mode MILD DYNAMIC STANDARD USER Picture quality Display soft pictures Display dynamic pictures Display normal pictures The picture quality you set TV/AV MILD DYNAMIC STANDARD USER GAME 1 4 7 0 2 5 8 3 ZOOM 6 CALL 9 MUTE CALL SCAN MUSIC Picture adjustment 1 Press MENU button to display the Picture menu. Menu control buttons Picture BRIGHT 14 CONTRAST 25 COLOR 50 SHARPNESS 41 TINT 0 WHITE TONE NORMAL 2 Press P+ or P- to select item. 3 Press V+ or V- to adjust the level. You can also press Item BRIGHT CONTRAST COLOR SHARPNESS *TINT WHITE TONE button to call up the Picture menu. VV+ darker lighter weaker stronger paler deeper softer sharper purplish greenish NORMAL/COOL/WARM * To exit the menu, press CALL button or repeatedly press MENU button. Notes: Tint is only for NTSC system. The adjustment level is stored in the USER position. 17 Sound controls Adjusting volume TV/AV 1 Use Volume up/down button Press V- button, the volume decreases; Press V+ button, the volume increases. Use button 2 If youMUTE to mute the sound, want MUTE VOLUME 52 GAME 1 4 7 0 2 5 8 3 ZOOM 6 CALL 9 MUTE MUTE press MUTE button on the remote. To resume the sound, press this button again. SCAN Making use of Sound menu MUSIC NICAM VV+ Menu control buttons 1 Press MENU repeatedly to display Sound menu. 2 Press P+ or P- to select desired adjusting item. Sound VOLUME AVL 40 ON 3 Press V+/- to adjust the level. Item Volume *AVL Vweaker ON/OFF V+ stronger * AVL: auto volume limit. Each broadcasting station has its own signal conditions, which can make it necessary to adjust the volume every time the channel is changed. Turning "AVL" On lets' you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Receiving stereo programs The unit receives stereo broadcasts transmitted in the NICAM broadcast system. [. . . ] Contrast, colour tint are not correctly adjusted Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc. Possible interference of electronic interference from another TV set, a computer, an electronics game machine, a broadcast station, etc. This may be caused by reflections from nearby mountains or buildings. It is possible that the aerial "lead-in" is damaged or comes off. [. . . ]