User manual PALSONIC MODEL 7128

[. . . ] OWNER'S MANUAL 71CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 7128 Type Tested Electrical Safety AS/NZS 3250 Lic 4163 Standards Australia APP No: N15957 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 Congratulations on your purchase of this Palsonic colour television receiver We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. Contents Main features Notes for operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Cautions for safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation and appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] PICTURE menu Making use of the PICTURE menu can adjust the picture effect according to your personal preference and it will be stored as picture memory mode automatically. Press the CH button to select the item (the selected item is highlighted in red). Press the MENU button to exit to the main menu. Below are the characteristics of the picture adjustment item. OSD 0 Pressing Green bar moving VOL VOL Brighter Stronger Stronger Greenish Stronger 63 Item (BRIGHTNESS) (COLOUR) (CONTRAST) (TINT) (SHARPNESS) Darker Lighter Weaker Purplish Weaker Note: * TINT is effective only in NTSC system. * When the receiving TV signals are weaker, please adjust the sharpness to lower level to reduce the noise. * When the receiving TV signals are stronger, please adjust the sharpness to higher level to obtain clearer picture. 8 2. PRESET menu PROG SKIP AFT BAND 28 OFF ON U SYS 1 AUTO SEARCH MANUAL lllllllllll. . . . . . . . . . Making use of the PRESET menu can fulfil the function of auto-search, search. manual search , channel and band selection. (the selected item is highlighted in red). Press the MENU button to exit to the main menu. 1) PROG (program) Select the current program number while "PROG" is highlighted. Press VOL increase or decrease the program number progressively. PROG 0 1 2 99 button to 2) SKIP-ON/OFF Press CH button to highlight SKIP ON/OFF. Press VOL button to toggle between SKIP ON and OFF. When "SKIP ON" is set, the current channel program will be skipped. Making use of this function can skip some unwanted channel, say 5, 11, next when you press CH button to select channel, 5, 11 channel will be skipped. 0 1 4 6 10 12 * Press the channel direct select button can select the skipped channel. 3) AFT ON/OFF Making use of the AFT function can automatically fine tune the channel. Select and highlight AFT, pressing VOL button it toggles between ON and OFF. When in AFT ON, it can automatically fine tune the channel. In normal circumstances, please set AFT ON. When in the process of manual search, AFT is set "OFF" automatically. 4) Band Selection Press the CH button to highlight BAND. Press the VOL change sequence is VL VH U button to select band. The 9 5) SYS ( sound system ) This item is used to select sound system. Since this TV model's RF sound system is B/G only, this item gets into ineffectiveness in sound system selection. 6) Auto - search (AUTO) Press CH button to highlight AUTO. [. . . ] TV/AV selection Press the AV/TV button on the set or AV button on the remote controller to select TV or AV mode. When the TV is working at RF receiving mode, press AV button the set will be switched to AV1, 14 the screen displays AV1 and colour system; Press the button again and the set will be switched to AV2, the screen displays AV2 and colour system. Press the button once more, the set will be switched to TV mode and the screen displays current TV channel. 12 AUTO Press AV AV1 AUTO Press AV AV2 AUTO After 4 seconds Press AV Note: S-VHS IN and AV2 use the same interface. If you want to receive signals input through S-VHS terminal, switch the set to AV2, the S-VHS (S-VIDEO) input terminal has priority over the AV2 VIDEO terminal; To use equipment connected to the AV2 VIDEO IN terminal, disconnect any plug from the S-VHS terminal. [. . . ]