User manual PALSONIC MODEL 8110Y

[. . . ] OWNER'S MANUAL 81CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 8110Y Type Tested Electrical Safety AS/NZS 3250 Lic 4166 Standards Australia APP No: N15899 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Safety Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 2 If the sound isSYSTEM menu, enter into the press CH+/- to select SOUND, press VOL+/- to select a proper sound system. In some model there is only one sound system and in this case the sound system does not need to be adjusted. 14 COLOR SOUND AUTO I GAME SYSTEM COLOR SOUND AUTO I SELECT ADJUST SELECT ADJUST Operations Channel selection Making use of direct select buttons Use direct selection buttons channel 1 To select one-digit button Method 1: press 0-9 AV X -after 2 seconds X and wait for 2 seconds. 1 4 7 SC AN D SP 2 5 8 0 3 6 9 VOL VOL ME NU CH Method 2: press 0 button twice, and then press the channel number. Be sure the period of two-press should be within 2 seconds. Method 3: press 0 button, then input the number and wait for 2 seconds. Be sure the period of two-press should be within 2 seconds. CH SLEEP EDIT SOUND PIC 2 To select two-digit channel Method 1: Input the channel number using the digit buttons and wait for 2 seconds. Be sure the period of two-press should be within 2 seconds. X -X Xafter 2 seconds XX GAME SYSTEM Method 2: press 0 button, and then input the channel number. Be sure the period of two-press should be within 2 seconds. To three digit 3 Justselectthe channel channel input number. Be sure the period of two-press should be within 2 seconds. X -- X X- XXX Note: the maximum channel number is 255. 15 Operations Channel selection (continued) Making use of channel up/down buttons/Previous channel button/Channel scan/channel edit Use Channel up/down buttons AV 1 Press CH+ button, the channel number increases. 2 Press CH- button, the channel number decreases. Use Previous channel button Press button to switch between the current channel and the previous channel. For example, the channel you previously watched is 11, the current channel is 2, press the button, it will return to channel 11, press the button again it will return to channel 2. 1 4 7 SC AN D SP 2 5 8 0 3 6 9 ME NU CH VOL VOL 3 PIC Channel scan Press SCAN button, the set will scan the channel from the current channel to higher channels one by one until all the programs are scanned over and then stop. During scanning, pressing any button will stop it and the screen will settle at the current scanned program. 2 CH SLEEP EDIT SOUND CHANNEL SCANNING GAME SYSTEM Channel edit button to display 1 Press EDITEXCHANGE CHANNEL menu. select 2 Press CH+/-1, touse VOL+/- to CHANNEL set the number which you want to swap, for example, channel 6. CHANNEL EXCHANGE CHANNEL 1 CHANNEL 2 EXCHANGE SELECT ADJUST 6 10 You can press DSP button twice to display the current time of the TV set, press again to cancel. select 3 Press CH+/-2, touse VOL+/- to CHANNEL set the number which you want to swap to, for example, channel 10. EXCHANGE, press 4 Press CH- to6select10 are swapped. VOL+ or VOL- and the channel and Repeat the above steps to edit the programs in your favourite order. 16 Operations Picture adjustment Picture adjustment To select the picture mode You can select the picture quality instantly among three modes and one user-set mode. AV 1 4 7 SC AN D SP 2 5 8 0 3 6 9 Press the PIC button to select the desired picture quality. BRILLIANT, STANDARD, SOFTNESS and PERSONAL (user-set) can be selected cyclically. BRILLIANT STANDARD SOFTNESS PERSONAL VOL VOL CH SLEEP EDIT SOUND PIC ME NU CH Picture quality Mode BRILLIANT Display more brightness and contrast pictures Display normal pictures STANDARD Display mild pictures SOFTNESS The picture quality you set PERSONAL Adjusting picture PICTURE SOUND TIMER TUNING SETUP GAME SYSTEM 1 Press MENU button. 2 Press VOL+ or VOL- button to select PICTURE icon. 3 Press CH- to enter into the PICTURE menu. menu, 4 In PICTURE desiredpress CH+/to select the item, press VOL+/- to adjust. Item Contrast Brightness Colour Tint Sharpness Noise reducer VOLweaker darker paler purplish softer SELECT CONFIRM PICTURE SOUND TIMER TUNING SETUP CONTRAST BRIGHT COLOR SHARP NOISE REDU. 40 50 50 50 OFF SELECT ADJUST CONTRAST 50 VOL+ stronger lighter deeper greenish sharper ON/OFF Notes: Tint is only for NTSC system. The adjusted level is stored in the PERSONAL position. 17 Operations Sound adjustment Sound adjustment Adjusting volume Use button. 1 PressVOL+ or VOL-the volume VOL+ button, AV 1 4 7 SC AN D SP 2 5 8 0 3 6 9 increases; Press VOL- button, the volume decreases. VOLUME 50 (MUTE) button. 2 Use want to mute the sound, If you press button on the remote control. [. . . ] With every press of this button the sleep time changes in the sequence of OFF, 120 MIN. , 110MIN. , ---- 10MIN. SLEEP: 60 MIN. For example, you would like the TV to turn off in 60 minutes, you can press the SLEEP button repeatedly until the screen displays 60 MIN. To cancel the sleep timer, you can press the SLEEP button repeatedly until OFF is displayed on the screen. 23 Operations Playing games Playing games There are two built-in games for you to play: one is Falling cube, the other is Submarine. Making use of Falling cube SCORE 0 RECORD: 100 AV 1 Press GAME button once to enter into Falling cube game interface. one /// 2 Press any startof game. buttons to the LEVEL 1 1 4 7 SC AN D SP 2 5 8 0 3 6 9 On the screen, there are falling cubes. Pressing button can change the cubes' shape; Pressing or buttons can move the cubes leftward or rightward while pressing button can hasten the cubes' falling speed. [. . . ]