User manual PALSONIC PMC-191

[. . . ] Your desired station can be received by "Manual Tuning" or "Auto Tuning". Press the MEMORY button (at Remote), to enable program state. Press the M-UP / REPEAT button (at Remote), to adjust preset station number. Frequency is written in the Preset a Memory by pushing MEMORY button once again. [. . . ] Press the Random button again to terminate the Random display. . During CD Play Random Play is started by pressing the RANDOM button once. To obtain optimum sound performance for CD, select the switch at the back to CD position. Program Play (For CD only) by Remote Up to 20 tracks can be programmed for disc play in any order. Before use, be sure to press the Stop button. PROGRAM NO. STATION NO. 1. Press the MEMORY button (at remote), the display will show blinking "Track" and "Memory". Select a desired track by using the Skip buttons. Press the MEMORY button again to enter the track into the program. Repeat steps 2 and 3 to enter additional memories into the program, if necessary. When all the desired tracks have programmed, press PLAY / PAUSE button to play the disc in the order you have programmed. The display will show the Program Indicator "MEMORY" to identify this function. Press STOP button to terminate program play. . Remarks: There are 5 seconds for memory writing enable state, after that the state would released automatically. Notes: 1. The program memory will be cleared when the Power button is set to "OFF", when CD mode is changed to other modes, or when EJECT button is pressed. During program play, press UP / | button to select the programmed track in order. 3 You can repeat all programmed tracks endlessly by this function. Follow stop 1 to step 5 in Program Play. To cancel Repeat Play, press the M-UP / REPEAT button again. Repeat Play (For CD only) by Remote Single Track Repeat Play (only available for normal playing) You can repeat a particular track of the disc endlessly by this function. Press M-UP / REPEAT button twice at Remote. The display will show "REPEAT" and flashing, and repeat function would be initialised. To cancel repeat play, press the M-UP / REPEAT button one again. . Remarks: To repeat the track that is playing, press the M-UP /REPEAT button twice. All Tracks Repeat Play (available for both normal playing and programmed playing) You can repeat the entire disc endlessly by this function. The display will show "REPEAT". To cancel repeat play, press the M-UP / REPEAT button twice. Playing the Beginning of each Track (INTRO) The Intro feature lets you sample all of the CD tracks for 10 seconds. [. . . ] Adjust the position of the Beat Cut switch on mode selector ( For AM / MW or LW Band only). CD . B. Recording Fromselector to "CD" position. Insert a cassette suitable for recording, press pause key then press record will stand by. Recording functionand be onpress (to release) pause key to start recording. [. . . ]