User manual PALSONIC PMSL-729

[. . . ] Instruction manual PSML-729 PSML-329 Mini Component Sound System PSML-729/PMSL-329 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 WORTH knowing Please keep the sound system's guarantee card and receipt safe for warranty purposes, if guarantee card is supplied to you. Precautions Read carefully through this manual to familiarise yourself with this high - quality sound system. Make sure the rating of your household electricity supply matches that shown on the back of the sound system. Refer to this chapter and the "Installation/connections" chapter (page 18/19) to help you install and adjust your sound system. expose the sound system to high levels of humidity and heat, to avoid the risk of fire and electric shock. [. . . ] Bass enhancement (on / off), see page 5. To select timer setting and to activate / deactivate timer stand-by. To set the volume level. 7 RADIO listening Tuning stations FUNCTION Select the tuner function. To find weak stations too, press repeatedly while tuning. To find powerful stations quickly tune automatically keeping either button pressed until tuning starts. BAND TUNE TUNE A station is being received. TAPE 1/2 FM stereo broadcasts with too much noise can be switched to mono for less noise. Programming station presets You can store up to 30 FM / 15 AM stations. TUNE TUNE Find a station as under "Tuning stations". The system assigns a station to a number beginning with 1 one after another. Selecting station presets PRESET Select lower or higher preset numbers. On the machine select the tuner function and the band by pressing BAND / TUNER button. The other buttons are on the machine too. If you try to store a 31st FM / 16th AM (MW) station, the display will show "FULL". To clear a preset station, select it, press , then for 3 seconds. You can use the button of the remote control to switch back to stereo. CLEAR TAPE 1/2 8 TAPE 1: To playback prerecorded tapes. TAPE 2: Only to playback prerecorded tapes and to record tapes. For tape recording see page 12-13. TAPE playing Playing tapes FUNCTION Select the TAPE 1 or TAPE 2 function. Open either tape compartment to load the tape. button on the machine PUSH OPEN Be sure to have the open part of the cassette downwards and the left hand spool fully wound. Close the compartment door again, pushing it softly. PRESET Start playback. CLEAR Stop playback. Winding Stop playback. CLEAR TUNE TUNE Fast rewind or advance the tape. Skipping a piece PRESET During playback. Fast rewind to the beginning of the current piece of music or advance to the next piece. TUNE TUNE Continuous playback FUNCTION Select the TAPE 1 function. Set TAPE 1 to play. After playing TAPE 1, the machine will commence with TAPE 2 (one side). On the machine select the tape function by pressing the TAPE 1/2 button. The tape counter resets to "0000" when a tape compartment is opened ("0000" need not be the beginning of the tape). To find the next piece of music at least 5 sec. free space has to left between the pieces. PRESET 9 CD playing CD label up Playing CDs FUNCTION Select the CD function. OPEN / CLOSE on the machine Open the disc compartment to load a disc. Be sure to have the disc label facing upwards. To play 3 discs, place 2 discs and turn the trays for the third tray, using DISC CHANGE button. (Also to load a disc while another is playing. ) To start a first track for specific disc. DISC CHANGE on the machine TUNE TUNE To select specific start track. Start your recording. TAPE REC SET If you want to interrupt recording briefly-and to continue. [. . . ] Move the AM antenna slowly for better reception. - Be sure playing / recording heads and tape guiding parts are clean, see bottom of this page. - Cover the protective hole of the cassette with adhesive tape. - Correct source CD, tape, tuner, AUX selected? [. . . ]