User manual PALSONIC TFTV-765

[. . . ] OWNER'S MANUAL 76CM CORDLESS REMOTE LCD TV/MONITOR MODEL: TFTV765 N111 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 Contents Congratulations on your purchase of this Palsonic LCD TV. We recommend that your thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this LCD TV. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In MENU operations, the CH / buttons are used to select item upwards or downwards; the VOL+/- buttons are used to adjust or confirm selected item. Press MENU button in TV mode PICTURE SETTING Brightness Contrast Color + + + + + 50 50 50 50 50 To adjust the picture's brightness. To adjust the picture's colour saturation. To adjust the picture's skin colour. (This item is available only in NTSC). Sharpness Tint <V-> or V+> key to change Press MENU button SOUND Bass Treble Balance <V-> or V+> key to change + + + 25 25 25 To adjust the Bass. To adjust the Balance. Press MENU button To adjust colour system. SETUP Color sys Sound sys Language OSD position OSD background AUTO BG Eng Upper Left Opaque To adjust sound system. To set OSD background. <V-> or V+> key to change Press MENU button CHANNEL SETTING Auto search Search Fine Tune Change Prog Current Prog Change to Prog Skip 12 15 ON <V-> or V+> key to change To start auto search. To exchange current channel with the selected target channel. To select a target channel to exchange with current channel. To skip or unskip, current channel. 14 Press MENU button in PC mode PICTURE SETTING Brightness Contrast Phase Frequency USER_R USER_G USER_B Color Temp 9300K + + + + + + + 25 25 25 25 25 25 25 To adjust picture's brightness and contrast in PC mode. (not affect picture in TV or AV mode) If the best picture can not be obtained after many times of auto correction, you can adjust these two items to obtain the best picture. Press MENU button repeatedly to display CHANNEL SETTING menu. Press VOL+ or VOL- button to confirm or adjust selected item. Auto Search POWER CH VOL - VOL + CH ENTER Please enter into CHANNEL SETTING menu and select Auto Search item. Press VOL- or VOL+ button to start Auto Search and all active programs will be memorised. 10 During the process of Auto Search, pressing VHFL MENU button will stop Auto Search. MENU Notes: Press <Menu> to escape C. SYS ZOOM CLK SLP Please confirm the sound system is correct according to your area before Auto Searching. AUTO. ADJ P. M DSP Manual Search 1 4 7 AV 2 5 8 0 OSD POSITION Bass+ 3 6 9 -/-Treb+ STILL Use manual search function if desired channels cannot be preset or if you would like to preset channels to specific position numbers one by one. Use 0~9 digit buttons or CH / buttons to select a position number firstly, then enter into CHANNEL SETTING menu and select Search Channel searching. . Press VOL+ button to enter Channel Press <V->/<V+> to search channel Search sub-menu, then press VOL+ or VOL- to Press <P->/<P+> to shift band start manual search. Press MENU button can exit Channel Search sub-menu. Bass - Treb- Fine Tuning In area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning. Use 0~9 digit buttons or CH / buttons to select the desired channel, then enter into Fine Tuning. . 10 CHANNEL SETTING menu and select Fine VHFL tune item. Press VOL+ button to enter into Fine Press <Menu> to change tuning sub-menu, then press and hold VOL+ or VOL- to start Fine tuning. 17 Channel Preset (continued) CHANNEL SETTING Auto search Search Fine Tune Change Prog Current Prog Change to Prog Skip 12 15 ON <V-> or V+> key to change Channel Skipping You can skip unnecessary channels by using Skip function when you browse program by CH / buttons. Use 0~9 digit buttons or CH / buttons to select a unwanted channel firstly, then enter into CHANNEL SETTING menu and select Skip item. Press VOL+/- button to select ON to skip this channel. [. . . ] During the process of auto correction, all buttons on the remote control and set's panel do not work until this process is finished. When the set displays some signal formats that are nonstandard and can not adjust by itself to the best displaying status, now you can press AUTO. ADJ button to correct the displaying again. STILL Bass - Treb- 26 PICTURE SETTING Brightness Contrast Phase Frequency USER_R USER_G USER_B Color Temp 9300K + + + + + + + 25 25 25 25 25 25 25 When there is correct input signal, press MENU button and PICTURE SETTING menu appears. Use CH / to select item and VOL+/- to adjust Adjusting brightness and contrast You can adjust bright and contrast in PC mode and this adjustment does not effect the brightness and contrast in TV and AV mode. <V-> or V+> key to change Adjusting phase and frequency POWER CH VOL - VOL + CH ENTER If you can not obtain the best display after auto correction for many times. Now you can adjust phase and frequency to obtain the best display. PICTURE SETTING Brightness Contrast Phase Frequency USER_R USER_G USER_B Color Temp 9300K + + + + + + + 25 25 25 25 25 25 25 MENU C. SYS ZOOM CLK SLP <V-> or V+> key to change AUTO. ADJ P. M DSP Adjusting Colour temperature 1 4 7 AV 2 5 8 0 OSD POSITION Bass+ 3 6 9 -/-Treb+ You can select different Colour temperature to obtain correct white. [. . . ]