User manual PANASONIC AG-5210

[. . . ] Please take time to fill in the information on the right. Be sure to retain this manual as your convenient camera information source. Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Serial No. Safety Precautions CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. CAUTION: REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. [. . . ] You can also select multiple files in succession. To complete the settings Press the MENU button. LSQT1145 79 Editing To cancel all DPOF settings Press the MENU button, then select [PICT. SETUP] # [DPOF SET] # [CANCEL ALL] and press the joystick. When the confirmation message appears, select [YES], then press the joystick. DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF. The DPOF setting can be established for up to 999 files. DPOF setting made on other devices may not be recognized by this unit. Please perform the DPOF settings on this unit. You cannot add the recording date to pictures to be printed with the DPOF settings. LSQT1145 80 Disc and card management Disc and card management Disc management Finalizing a disc It allows the discs to be played on other devices. (-RW<VR>) (-RW<V>) (-R) If you insert a DVD-RW or a DVD-R disc recorded in this unit (that has not been finalized) into another device such as DVD recorder, computer, etc. , the disc may become unusable. Be sure to finalize the disc on this unit before inserting it in other devices. DVD-RAM: It is not necessary to finalize DVD-RAM. (RAM) (-RW<VR>) (-RW<V>) Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. Protecting a disc (RAM) (-RW<VR>) This is for preventing recorded contents from being deleted or edited by mistake. Further recording and editing is not possible on protected discs until the protection is released. ¬ Rotate the mode dial to select . or 1 Press the MENU button, then select [DISC SETUP] # ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [DISC SETUP] # 82 LSQT1145 Disc and card management [FORMAT DISC] # [YES] and press the joystick. Displaying disc information (RAM) (-RW<VR>) (-RW<V>) (-R) Information such as the number of recorded scenes, the remaining space and whether or not the disc is finalized or protected is displayed. MENU When formatting a DVD-RAM, skip to step 3. ¬ Rotate the mode dial to select . or 2 (When formatting a DVD-RW only) Select format type (l 24), then press the joystick. Press the MENU button, then select [DISC SETUP] # [INFORMATION] # [YES] and press the joystick. MENU 3 When the confirmation message appears, select [YES], then press the joystick. To exit the information screen Press the MENU button. When formatting is complete, press the MENU button to exit the message screen. In the case of a double sided disc, format each side. It may not be possible to format a disc with many scratches or dirt. During formatting, do not turn this unit off. When you format the disc, use a battery with sufficient battery power or the AC adaptor. Formatting DVD-RAM: We recommend formatting on this unit. If formatting on a computer, use the supplied software (AG-5210/VDR-D230). For more details, refer to the operating instructions of the software. If you connect this unit to a computer to format a DVD-RAM, you cannot use DVDForm (l 92) to physically format it. Use a separate DVDRAM drive to physically format a DVD-RAM. [. . . ] THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANYBREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer, loss of media or images, data or other memory or recorded content. The items listed are not exclusive, but are for illustration only. ) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. [. . . ]