User manual PANASONIC AG-5710

[. . . ] of your SD Video Camera, SD/HDD Video Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL Ó OR COLOURED GREEN OR GREEN/YELLOW. [. . . ] Depending on the zoom magnification, there are iris values that are not displayed. 1/100 100 OPEN BACK A : Shutter speed: 1/50 to 1/8000 If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/25 and 1/8000. The shutter speed closer to 1/8000 is faster. B : Iris/Gain value: CLOSE !# (F16 to F2. 2) !# OPEN !# (0dB to 18dB) When the iris value is adjusted to brighter than [OPEN], it changes to the gain value. To return to automatic settings, press the iA/MANUAL button. When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value. Manual shutter speed adjustment You may see a band of light around the object that is shining very bright, or having very high reflection. During normal playback, image movement may not look smooth. VQT3E82 59 Recording with manual focus If auto focusing is difficult due to the conditions, then use manual focus. ¬ Change the mode to . Press the iA/MANUAL button to switch to manual mode (l 57) 1 (When MF assist function is used) Select the menu. (l 25) [RECORD SETUP] # [MF ASSIST] # [ON] 2 3 Use the joystick to select [MF] Adjust the focus by selecting or with the joystick. :To focus on a close subject :To focus on a faraway subject MNL 5/5 NEXT A Part displayed in blue The in-focus area is displayed in blue. The normal screen returns approximately 2 seconds after you finish bringing the subject into focus. When [MF ASSIST] is set to [OFF], the blue area is not displayed. To return to auto focus, either switch to [AF] as in step 2, or repress the iA/ MANUAL button. j When the number of scenes exceeds 99 j When the world time setting is changed VQT3E82 65 Repeat playback Playback of the first scene starts after playback of the last scene finishes. Select the menu. (l 25) [VIDEO SETUP] # [REPEAT PLAY] # [ON] The indication appears on the full screen views. All the scenes are played back repeatedly. (When playing back motion pictures by date, all the scenes on the selected date are played back repeatedly. ) Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. Select the menu. (l 25) [VIDEO SETUP] # [RESUME PLAY] # [ON] If playback of a motion picture is stopped, appears on the thumbnail view of the stopped scene. The memorised resume position is cleared if you turn off the unit or change the mode. (The setting of [RESUME PLAY] does not change. ) 66 VQT3E82 Playback Playback 2 Still picture playback 1 2 Change the mode to . SDR-T70 Use the joystick to select the play mode select icon A, then press the centre of the joystick. Select [SD CARD]/[BuiltinMemory] and [PICTURE], then press the centre of the joystick. 3 SDR-S70 Select [PICTURE], then press the centre of the joystick. SDR-H100 / AG-5710 Select [SD CARD]/[HDD] and [PICTURE], then press the centre of the joystick. Select [ENTER], then press the centre of the joystick. Press the MENU button to cancel the setting. VQT3E82 67 4 Select the still picture to be played back, then press the joystick. The operation icon will be displayed or hidden each time the centre of the joystick is pressed. Next (previous) page can be displayed by selecting / . Playing back still pictures by date Still pictures recorded on the same day can be played back in succession. 5 Select the playback operation with the joystick. 1 Select the date select icon and press the joystick. 1/;: 2;: ;1: : Slide show (playback of the still pictures in numerical order) start/pause. Stops the playback and shows the thumbnails. A Date select icon 2 3 Select the playback date, then press the joystick. The still pictures recorded on the date selected are displayed as thumbnails. Change the thumbnail display During step 4, the thumbnail display changes in the following order if the zoom lever is operated to side or side. 20 still pictures () 9 still pictures () 1 still picture Select the still picture to be played back and press the joystick. 9 still pictures display returns if the unit is turned off or the mode is switched. Still picture compatibility This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). [. . . ] When a cold room has been warmed up quickly. When cool wind from an air conditioner is directly blown onto this unit. After summer afternoon showers of rain. When this unit is in a very humid place where the air is thick with steam. [. . . ]