User manual PANASONIC AG-6840HP

[. . . ] For Battery Pack Replace only with same or specified type. Do not disassemble or dispose of in fire. Do not store in temperatures over 60C (140F). Do not leave the battery in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. [. . . ] SELECTED CLIPS: The clips you have selected are displayed. MARKED CLIPS: The clips with shot marks are displayed. TEXT MEMO CLIPS: The clips with text memos are displayed. The thumbnails at text memo positions, time codes (TC), total number of memos and the current order of the clips are displayed. To delete a text memo: 1) Move the cursor to the clip whose text memo is to be deleted, and press the button. A thumbnail of the text memo now appears. 2) Move the cursor to the thumbnail with the text memo to be deleted. 3) Press the MENU button to display the menu, and select OPERATION-DELETE. SLOT CLIPS: The clips on the P2 card in the specified slot are displayed. SETUP: Various setup operations are performed. EXIT: Select this to return to the last screen. When clips have been copied by operating Explorer, for instance, the "!" indicator may appear on the clips. If this happens, "!" can sometimes be released by downloading the latest version of the P2 viewer from the web site given below, installing it in your computer, and copying the clips again. https://eww. pavc. panasonic. co. jp/pro-av/ 1 On the thumbnail screen, press the MENU button. (Page 65) 2 Select OPERATION using the button, and press the (or and ) button. 3 Select the desired item using the buttons, and press the button. and DELETE: Select this to delete the selected clip. Select YES to delete the clip or NO to cancel the deletion, and press the button. FORMAT: Select this to format a P2 card or SD memory card. When you move to FORMAT, the card selection screen will appear. Select the P2 slot (SLOT1 or SLOT2) or select SD CARD, and press the button. Select YES to format the card or NO to cancel the formatting, and press the button. 70 P2 Checking the clip or card information (PROPERTY) You can perform any of the following operations. If necessary, make preparations prior to undertaking the operations. Checking clip information Move the cursor to the clip to be checked. [. . . ] 20 minutes for DVCPRO or DV) or when a one-time recording extends over more than one P2 card, the recording concerned will automatically be undertaken as a separate clip. At this time, each clip will be provided with its own COUNT value. Same as GLOBAL CLIP ID (UMID data) Example of recording (DVCPRO50) a clip on one P2 card: REC start (recording start) REC/PAUSE (recording pause) TYPE2 USER CLIP NAME to be recorded If clip metadata has been read in If no clip metadata has been read in or if the setting for recording clip metadata has been turned off Uploaded data + COUNT value Recording duration = Approx. Clip 2 COUNT value = 0002 5 min. Same as CLIP NAME Example of recording a clip on two P2 cards: REC start (recording start) Clip 1 COUNT value = 0003 1st card REC/PAUSE (recording pause) Clip 2 COUNT value = 0004 2nd card The COUNT value is indicated as a four-digit number. The COUNT value is incremented each time a new clip is captured if clip metadata has been read in and TYPE2 has been selected as the recording method. [. . . ]