User manual PANASONIC AGA850-P

[. . . ] Please take time to fill in the information on the right. The serial number is on the tag located on the bottom of your camera. Be sure to retain this manual as your convenient camera information source. Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Serial No. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. [. . . ] When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value. Manual shutter speed adjustment You may see a band of light around an object that is shining very bright, or highly reflective. During normal playback, image movement may not look smooth. 60 VQT3E42 Recording with Manual focus If auto focusing is difficult due to the conditions, then use Manual focus. ¬ Change the mode to . Press the iA/MANUAL button to switch to Manual Mode (l 58) 1 (When MF assist function is used) Select the menu. (l 27) [RECORD SETUP] # [MF ASSIST] # [ON] 2 3 Use the joystick to select [MF] Adjust the focus by selecting or with the joystick. :To focus on a close subject :To focus on a faraway subject MNL 5/5 NEXT A Part displayed in blue The in-focus area is displayed in blue. The normal screen returns approximately 2 seconds after you finish bringing the subject into focus. When [MF ASSIST] is set to [OFF], the blue area is not displayed. To return to Auto focus, either switch to [AF] as in step 2, or repress the iA/ MANUAL button. The blue display does not appear in the motion picture that is actually recorded. 61 VQT3E42 Playback Playback 1 Motion picture playback 1 2 Change the mode to . SDR-T70 Use the joystick to select the Play Mode Select icon A, then press the center of the joystick. Select [SD CARD]/ [Built-inMemory] and [VIDEO], then press the center of the joystick. 3 SDR-S70 / SDR-S71 SDR-H100 Select [VIDEO], then press the center of the joystick. Select [SD CARD]/[HDD] and [VIDEO], then press the center of the joystick. Select [ENTER], then press the center of the joystick. Press the MENU button to cancel the settings. 62 VQT3E42 4 Select the scene to be played back, then press the joystick. Change the thumbnail display Pressing the zoom lever to the or side as in step 4 will cause the thumbnail display to change in the order shown below. 20 scenes () 9 scenes () 1 scene () Time frame index (l 65) The operation icon will be displayed or hidden each time the center of the joystick is pressed. Next (previous) page can be displayed by selecting / . 5 Select the playback operation with the joystick. 0h00m00s 9 scenes display returns if the power is turned off or the mode is changed. 1/;: 6: 5: : Playback/Pause Rewind playback Fast forward playback Stops the playback and shows the thumbnails. 63 VQT3E42 Speaker volume adjustment Move the volume lever to adjust the speaker volume during playback. Frame-by-frame playback The motion picture is advanced one frame at a time. (l 27) [VIDEO SETUP] # [RESUME PLAY] # [ON] If playback of a motion picture is stopped, appears on the thumbnail view of the stopped scene. The memorized resume position is cleared if you turn off the power or change the mode. (The setting of [RESUME PLAY] does not change. ) 66 VQT3E42 Playback Playback 2 Still picture playback 1 2 Change the mode to . SDR-T70 Use the joystick to select the Play Mode Select icon A, then press the center of the joystick. Select [SD CARD]/ [Built-inMemory] and [PICTURE], then press the center of the joystick. 3 SDR-S70 / SDR-S71 SDR-H100 Select [PICTURE], then press the center of the joystick. Select [SD CARD]/[HDD] and [PICTURE], then press the center of the joystick. Select [ENTER], then press the center of the joystick. Press the MENU button to cancel the settings. 67 VQT3E42 4 Select the still picture to be played back, then press the joystick. Change the thumbnail display During step 4, the thumbnail display changes in the following order if the zoom lever is operated to side or side. 20 still pictures () 9 still pictures () 1 still picture The operation icon will be displayed or hidden each time the center of the joystick is pressed. Next (previous) page can be displayed by selecting / . 5 Select the playback operation with the joystick. 9 still pictures display returns if the power is turned off or the mode is changed. Still picture compatibility This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). The file format of still pictures supported by this unit is JPEG. (Not all JPEG formatted files will be played back. ) This unit may degrade or not play back still pictures recorded or created on other products and other products may degrade or not play back still pictures recorded on this unit. 1/;: 2;: ;1: : Slide show (playback of the still pictures in numerical order) start/ pause. Stops the playback and shows the thumbnails. 68 VQT3E42 Playing back still pictures by date Still pictures recorded on the same day can be played back in succession. Changing the playback setting and playing back the slide show 1 1 Select the date select icon and press the joystick. Select joystick. and press the A Date select icon 2 Select the desired item and press the joystick. 2 3 Select the playback date, then press the joystick. The still pictures recorded on the date selected are displayed as thumbnails. [DATE SETUP]: Select the desired playback date. [SLIDE INTERVAL]: Select the playback time display interval. Select the still picture to be played back and press the joystick. (When [DATE SETUP] has been selected) Playing back of all the still pictures returns if the power is turned off or the mode is changed. Even if still pictures are recorded on the same day, they are grouped separately in the following cases. [. . . ] Encender y apagar el dispositivo con el botón de alimentación Pulse el botón de alimentación para encender el dispositivo. Cómo cargar la batería 1 Conectar el adaptador de CA al terminal de entrada de CC de esta unidad. 2 Conectar el cable de CA al adaptador de CA, luego a la salida de CA. Enchufar el cable de CA en 2 y luego en 3. El indicador de estado A parpadeará de color rojo en un intervalo de 2 segundos, indicando que comenzó la carga. A El indicador de estado se ilumina. [. . . ]