User manual PANASONIC AG-DV1000P

[. . . ] 4 4 4 7 8 9 9 9 10 10 10 11 12 12 15 15 15 15 . . . . . . . . . . . . . . . . . . . . . . . . 34 34 37 39 39 40 40 41 42 42 42 43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 17 17 18 18 19 19 19 20 20 21 21 21 22 22 23 23 24 24 USB . . . . . . . . . . . . . . . . . . . . . 46 47 47 48 48 54 57 59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Recording and Photoshot Recording can be done with pictures that have titles. MENU DPOF SETTING (PRINT QUANTITY) 2 PRESS MENU TO EXIT 1 To Clear the Title Display Press the [TITLE] Button (10). The [ACCESS] Indication appears until the titles are displayed completely. Perform the Recording after the [ACCESS] Indication disappears. For other notes concerning this item, see -128-. Writing Printing Data on a Card (DPOF Setting) DPOF Setting Printing data (DPOF Settings), such as the number of images to be printed, can be written to the Card. "DPOF" means Digital Print Order Format. 1 Slide the [TAPE/CARD/CARD MODE] Selector (27) to [CARD MODE] until the [PICTURE] Indication appears. TAPE CARD CARD MODE To print all pictures one at a time, select [ALL 1]. When all images are not printed, select [ALL 0]. 3 Select a desired picture and press the [PUSH] Dial (38). The selected picture is marked with a frame. The number of prints set by DPOF 1 is displayed. 4 Turn the [PUSH] Dial (38) and select the number of pictures to be printed, and press the [PUSH] Dial (38). [¥] Indication 2 is displayed in the picture set. (-118-) 5 Repeat Step 3 and 4 and press the [MENU] Button (46) when the setup is completed. To Verify DPOF Setting Select [VERIFY] in Step 2. Take steps to ensure that valuable pictures are stored on the personal computer, etc. A Card formatted with an other equipment (like a Personal Computer) might be unusable or it might take more time for recording. We recommend that you use this equipment to format it. -114- With a PC With a PC USB Connection Kit Using the supplied USB Connection Kit, you can import still pictures into your personal computer. Do not connect the USB Cable until the USB driver is installed. 2 Set the Movie Camera to Card Playback Mode. 3 Set the Movie Camera to Still Playback Mode. 4 Connect the supplied USB Cable to [ ] Socket (30). It enters PC connection mode. 3 Connect the supplied USB Cable to [ ] Socket (30). S-VIDEO IN/OUT DV (30) 4 Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [WEB CAMERA] >> [ON]. (46) (38) WB/SHUTTER/IRIS/ PUSH MF/VOL/JOG MENU S-VIDEO IN/OUT DV It enters WEB CAMERA Mode. 5 Start the NetMeeting. (30) The USB Connection Kit can be used with Windows98 Second Edition/Me/XP. Use AC Adaptor as power source for the Movie Camera. (The Card or its contents may be destroyed if battery power is lost while transmitting data. ) Mode cannot be changed in PC connection mode by operating [OFF/ON/MODE] Switch. For more details on the operating environment, installation, connections, and procedures, please refer to USB Connection Kit's operating instructions. [. . . ] 5) Recording a fast-moving subject Because the focus lens-inside moves mechanically, it cannot keep up with the fast-moving subject. 6) Recording a subject with little contrast Because the Movie Camera achieves focus based upon the vertical lines of an image, a subject with little contrast, such as a white wall, may become blurry. -135- Others ª Time Code Time Code signals are data that indicate time measured in hours, minutes, seconds, and frames (25 frames per second). If this data is included in a recording, an address is assigned to each image on the tape. The Time Code is automatically recorded as a part of the sub-code at each recording. [. . . ]