User manual PANASONIC AG-HSC1

[. . . ] Operating Instructions High Definition Video Camera Model No. AG-HSC1UP Before connecting, operating or adjusting this product, please read the instructions completely. Guía para rápida consulta en español está incluida. VQT1F36 Things You Should Know Thank you for choosing Panasonic!You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we're sure it will bring you and your family years of enjoyment. [. . . ] An error message appears and the screen shows the thumbnails. The power will not turn off even if the LCD monitor is closed. The date/time displayed may be different from the recording date/time and it may take time to display the thumbnail display when playing back motion pictures not recorded on this unit. The remaining time for playback indication will be reset to "0h00m00s" each scene. Skip playback (to the start of a scene) (Operation is possible with the remote control only. ) Press the : or 9 button on the remote control during playback. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP Slow-motion playback 1 Move the cursor button up during playback to pause the playback. 2 Move and hold the cursor button right. (Slow-motion pictures will be played back in reverse when you move and hold the cursor button left. ) Normal playback is restored when you move the cursor button up. When slow-motion pictures are played back in reverse, they will be shown continuously at intervals of 0. 5 seconds. ª Operating with the remote control Press the E or D button. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP VQT1F36 69 Playback Frame-by-frame playback The motion picture is advanced one frame at a time. To adjust the volume Adjust the speaker volume during playback. 1 Move the cursor button up during playback to pause the playback. Move the volume lever to change the volume level. VOL 2 Move the cursor button right. (The frames will be advanced one at a time in the reverse direction when you move the cursor button left. ) W T Towards "r": increases the volume Towards "s": decreases the volume The further the [ ] indicator moves to the right, the higher the volume level becomes. When the adjustment is completed, the volume setting display will disappear. Normal playback is restored when you move the cursor button up. When the frames are advanced one at a time in the reverse direction, they will be shown in intervals of 0. 5 seconds. ª Operating with the remote control 1) Press the ; button. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP 2) Press the E or D button. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP VQT1F36 70 Playback Playing back motion pictures by date Recorded scenes are grouped by date on this unit. Scenes recorded on the same day can be played back in succession. Repeat playback Playback of the first scene starts after playback of the last scene finishes. 1 Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [BY DATE] and press the cursor button. Press the MENU button, then select [PLAY SETUP] # [REPEAT PLAY] # [ON] and press the cursor button. 2 Select the date for playback, then press the cursor button. The [ ] indication appears on the thumbnail and full screen views. The following scenes can be played back repeatedly. ­ When [PLAY MODE] is set to [VIEW ALL]: All the scenes on the SD card ­ When [PLAY MODE] is set to [BY DATE]: All the scenes on the selected date To cancel the repeat playback function Press the MENU button, then select [PLAY SETUP] # [REPEAT PLAY] # [OFF] and press the cursor button. The scenes recorded on the same day are displayed as thumbnails. 3 Select the scene to be played back. To return to playing back all the scenes Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [VIEW ALL] and press the cursor button. When [PLAY MODE] is set to [VIEW ALL], all recorded motion pictures will be played back in succession. ([ ] is displayed. ) Playing back all the scenes returns if the power is turned off or the mode dial is operated. Even if scenes are recorded on the same day, they are grouped separately in the following cases. ­ When the number of scenes exceeds 99 ­ When the card is repaired VQT1F36 71 Playback Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. Still picture (JPEG) playback Play back the still pictures recorded on the card. 1 Rotate the mode dial to select . Press the MENU button, then select [PLAY SETUP] # [RESUME PLAY] # [ON] and press the cursor button. The lens cover closes. 2 Press the cursor button up and If playback of a motion picture is stopped, [ ] appears on the thumbnail view of the stopped scene. then right to select the picture playback) tab. A (still To cancel the resume playback function Press the MENU button, then select [PLAY SETUP] # [RESUME PLAY] # [OFF] and press the cursor button. The memorized resume position is cleared if you turn off the power or operate the mode dial. (The [RESUME PLAY] setting is kept. ) A Still picture playback tab The still pictures recorded on the SD card are displayed as thumbnails (reduced-size images). 3 Select the file to be played back. B D E C B Previous page C Next page D File number display E Folder/file name The selected file will be encircled by a yellow frame. VQT1F36 72 Playback If 9 or more files have been recorded, the next (or previous) page can be displayed by moving the cursor button left and right or moving the cursor button down, selecting / by moving the cursor button left and right and then pressing the center of the cursor button. The file number display switches to the page number when the still picture playback tab or / is selected. ª About still picture compatibility This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back. ) If a non-standard file is played back, the folder/ file name may not be displayed. This unit may degrade or not play back data recorded or created on other products and other products may degrade or not play back data recorded on this unit. [. . . ] Deslice A en la dirección de la flecha para desbloquearlo y luego extraiga la batería. 1) Conecte el cable de CA al adaptador de CA y a la toma de CA. 2) Instale la batería en el compartimiento alineando la marca y, a continuación, conéctela de forma segura. La clavija de salida del cable de CA no queda completamente conectada al conector del adaptador de CA. Como se muestra en A, queda un espacio. A 3) Cierre la tapa de la batería. ª Inserción de la batería 1) Abra la tapa de la batería. [. . . ]