User manual PANASONIC AG-W2E

[. . . ] TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE POWER CORD PLUG FROM THE AC RECEPTACLE. CAUTION: Danger of explosion or fire if battery is mistreated. For Battery Pack Replace only with same or specified type. Do not disassemble or dispose of in fire. Do not store in temperatures over 60C (140F). [. . . ] SETUP: Various setup operations are performed. EXIT: Select this to return to the last screen. Proceed to step 4 only when you have selected SETUP. (Continued on the next page) 67 Playback Thumbnail operations (continued) P2 4 Select the desired setting item using the and buttons, and press the button. MARKED IND. : Select this to set whether the shot mark indicator is to be displayed (ON/OFF). TEXT MEMO IND. : Select this to set whether the text memo indicator is to be displayed (ON/OFF). VOICE MEMO IND. : Select this to set whether the voice memo indicator is to be displayed (ON/OFF). WIDE IND. : Select this to set whether the wide indicator is to be displayed (ON/OFF). PROXY IND. : Select this to set whether the proxy indicator is to be displayed (ON/OFF). DATA DISPLAY: Select the time code (TC), user information (UB), shooting time (TIME), shooting date (DATE) or shooting date (DATE TIME) for the area where the clip time is displayed. DATE FORMAT: Select year/month/day (YMD), month/day/ year (MDY) or day/month/year (DMY) as the order for displaying the recording date/time. If necessary, make preparations prior to undertaking the operations. Checking clip information Move the cursor to the clip to be checked. Checking the P2 card information Insert the P2 card into the unit. Checking the SD memory card information Insert the SD memory card into the unit. Setting the P2 card memory capacity display Checking the version of this system P2 4 To exit the information screen, press the Clip information screen 1 2 3 MENU button, use the button to select EXIT, and then press the button. 1 On the thumbnail screen, press the MENU button. (Page 64) 2 Select PROPERTY using the button, and press the (or and ) button. 1 Clip number 2 Thumbnail 4 5 3 Slot number/dubbing mode display 3 Select the desired item using the buttons, and press the button. and CLIP PROPERTY: The information of the selected clip is displayed. (See details at right. ) CARD STATUS: The P2 card information is displayed. (Page 71) DEVICES: The SD memory card information is displayed. (Page 71) PROPERTY SETUP: Set the method of displaying the P2 card memory capacity. After selecting P2 CARD CAP, select REMAIN (remaining memory) or USED (memory used), and press the button. [. . . ] 20 minutes for DVCPRO or DV) or when a one-time recording extends over more than one P2 card, the recording concerned will automatically be undertaken as a separate clip. At this time, each clip will be provided with its own COUNT value. Same as GLOBAL CLIP ID (UMID data) Example of recording (DVCPRO50) a clip on one P2 card: REC start (recording start) REC/PAUSE (recording pause) TYPE2 USER CLIP NAME to be recorded If clip metadata has been read in If no clip metadata has been read in or if the setting for recording clip metadata has been turned off Uploaded data + COUNT value* Recording duration = Approx. Clip 2 COUNT value = 0002 5 min. Same as CLIP NAME Example of recording a clip on two P2 cards: REC start (recording start) Clip 1 COUNT value = 0003 1st card REC/PAUSE (recording pause) Clip 2 COUNT value = 0004 2nd card The COUNT value is indicated as a four-digit number. The COUNT value is incremented each time a new clip is captured if clip metadata has been read in and TYPE2 has been selected as the recording method. [. . . ]