User manual PANASONIC AG-5260

[. . . ] ONLY This appliance is supplied with a moulded three pin mains plug for your safety and convenience. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. [. . . ] When the date or time to be searched is in the newly recorded section, it is recommended that the REV PLAY button be pressed. By pressing this button, the tape is returned a little in the reverse direction, the date and time data is loaded, and the search is performed using this data as a reference. 1 54 "S" lights. TIME S 2 1 4 ; 3 4 3 < 4 3 6 5 H 2 H 1 32 POWER 1 Set the tape. switch to ON, and insert the cassette 2 Press the COUNTER button to establish the time display mode. SEARCH screen appears on the TV monitor. SEARCH button. 3 Press the on the display tube, and the TIME DATE 6 To release the time/date search mode, press any "S" lights of the function buttons. The time at which the recording was ended is shown on the TIME DATE SEARCH screen. When the tape is played back, the date and time recorded on the tape are displayed. When the RESET button is now pressed, the display changes to the time at which the recording was started. [TIME DATE SEARCH] 25 ­ 12 10 : 25A RESET PLAY : REC START TIME PRESET : SEARCH START 4 Follow the steps below to set the search date and time. O Use the (2) and (1) SHIFT buttons to move the flashing part to the item whose setting is to be changed. O Press the (+) and (­) SET buttons to set the figure. 28 (E) Useful functions Internal timer recording Recording can be started and ended at the desired times which are set using the internal timer. <Note> Before setting the internal timer recording, complete the connections as well as the steps for "Setting the date and time" (page 11) and "Setting the recording time mode and number of cameras" (page 14). Registering programmes for internal timer recording 1 2 3 4 2 1 4 ; 3 4 3 < 4 3 6 5 H 2 H 1 POWER 1 Set the tape. O Press the (+) and (­) SET buttons, and change the setting. the settings, 5 Upon completionto of OFF position. PROGRAM switch the set the INT 2 1 4 ; 3 4 3 < 4 3 6 5 H 2 H 1 2·5 1 Finish setting the weekly timer and daily timer. monitor. The setting menu screen is cleared from the TV monitor, and the normal mode is restored. switch to the MENU 2 Set the PROGRAMscreen now appears position. TV 6 Press the TIMER MODE button on the front panel The setting menu on the and set it to the internal timer recording mode (the 3 Press the PAGE (+) or PAGE (­) button to display the P9 FREE SET TIMER screen. The flashing items are ones that can be set. [FREE SET TIMER] MONTH DAY ¢¢ ­ ¢¢ 1) ¢¢ ­ ¢¢ 2) ¢¢ ­ ¢¢ 3) ¢¢ ­ ¢¢ 4) ¢¢ ­ ¢¢ 5) ¢¢ ­ ¢¢ 6) ¢¢ ­ ¢¢ 7) ¢¢ ­ ¢¢ 8) ¢¢ ­ ¢¢ 9) ¢¢ ­ ¢¢ 10) ¢¢ ­ ¢¢ 11) ¢¢ ­ ¢¢ 12) P9 SET ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ "INT" lamp lights on the display tube). When the free-set timer is executed, "¢" will appear on the right of the free-set timer number. <Notes> O If the cassette tape has not been inserted or its accidental erasure prevention tab has been broken out, the buzzer will sound, and the INT lamp will flash. The buzzer will sound and the INT lamp will flash also when the date/time or the programme timer has not been set. O To release the internal timer recording mode, press the TIMER MODE button to turn off the INT lamp on the display tube. [FREE SET TIMER] MONTH DAY 1) ¢ 5­ 3 1) ¢ 5­ 4 1) ¢ 5­ 5 ¢¢ ­ ¢¢ 4) ¢¢ ­ ¢¢ 5) ¢¢ ­ ¢¢ 6) ¢¢ ­ ¢¢ 7) ¢¢ ­ ¢¢ 8) ¢¢ ­ ¢¢ 9) ¢¢ ­ ¢¢ 10) ¢¢ ­ ¢¢ 11) ¢¢ ­ ¢¢ 12) P9 SET SUN SUN SUN ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ ¢¢¢¢¢ MONTH Set the month (1-12, ¢¢) of the date concerned in this column. Set "¢¢" if the month is not going to be registered. "¢¢-¢¢-¢¢¢¢¢" appears for MONTH, DAY and SET. DAY Set the day (1-31) of the date concerned in this column. SET Select the programme which was set for the weekly timer. [. . . ] If it is set to any other position, the unit may fail to operate even when its function buttons are pressed. When recording in the time lapse mode, recording proceeds for about 3 seconds in the 3H mode in order to stabilize the tape transport. ____ Symptom Buzzer sounds. (During stop) Details of warning [REC WARNING] The time which was selected for the REC LOSS BUZZER item setting on the setting menu P6 REC WARNING screen has elapsed. [VTR MODE SELECT] BUZZER has been selected as the (TAPE END) MODE item setting on the setting menu P5 VTR MODE SELECT screen, and the tape end position has been detected. [. . . ]