User manual PANASONIC AG-6730

[. . . ] FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] OThe playback image stops in the Still Playback Mode. Press the [E] Button or [D] Button k on the Remote Controller. OWith each pressing of the [E] Button, still pictures advance in the reverse direction. With each pressing of the [D] Button, still pictures advance in the forward direction. If either one of the buttons continues to be pressed, still pictures advance continuously 1 frame at a time until the button is released. To Resume Normal Playback Press the [1] Button x. PUSH Press the [1] Button x. VOL/JOG ;! OIf the Camera Recorder is left in the Still Playback Mode for more than 5 minutes, the Camera Recorder switches to the Stop Mode to protect the video heads from excessive wear and tear. Finding the End of Recording (Blank Search Function) The Blank Search Function aids you locate the end of the recording on the Cassette quickly. To Cancel Blank Search Before Completion Press the [$] Button. 1 Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [BLANK SEARCH] >> [YES]. W. B/SHUTTER/IRIS PUSH > VOL/JOG MENU B BLANK OThe [BLANK] Indication appears during the Blank Search. OApproximately 1 second before the last recorded scene, the Camera Recorder switches to the Still Playback Mode. OIf there is no blank portion left on the Cassette, the Camera Recorder stops at the end of the tape. 34 VCR Mode Index Search Functions To facilitate searching of desired scene, this Camera Recorder automatically records index signals during recording, as explained in the following. Photoshot Index Signal These signals are automatically recorded whenever still pictures are taken in Photoshot Mode. (-22-) Photoshot Index Signals are not recorded on still pictures recorded in Continuous Photoshot Mode. OThe [ WIPE ] or [ MIX ] Indication appears, and the image is saved. Press the [OFF/ON] Button o in the scene in which you want to use the Wipe or Mix effect. OThe scene changes as a result of the Wipe or Mix effect. 4 OThe Wipe Function and Mix Function can be used only from the Remote Controller during playback. OIf the [OFF/ON] Button o is pressed while Wipe or Mix is carried out, the effect will stop temporarily at that point. Pressing the [OFF/ON] Button o again will bring back the effect. OFor other notes concerning this item, see -45-. 36 ­V VCR Mode Playing Back on Your TV By connecting your Camera Recorder with your TV, the recorded scenes can be viewed on your TV screen. OBefore connecting them, turn off the power of both the Camera Recorder and TV. After connecting the Camera Recorder and the TV as illustrated, start playback. [VIDEO IN] [S-VIDEO IN] 2 1 [AUDIO IN] S-VIDEO VIDEO IN/OUT IN/OUT L­ AUDIO IN/OUT ­R OUsing the AV Cable 1, make a connection with the TV. If the TV has an S-Video Socket, connect the S-Video Cable 2, too. To Make the Indications Appear on the TV Screen Press the [OSD] Button e on the Remote Controller. e OSD DATE/ TIME PHOTO SHOT START/ STOP OFor other notes concerning this item, see -45-. 37 VCR Mode Audio Dubbing You can add music or narration to the recorded Cassette. OIf the tape recorded in the [16bit] Mode is dubbed with the Audio Dubbing function, the original sound is erased. [. . . ] Please use the Manual Focus Mode instead. 1) Recording a subject whose one end is located closer to the Camera Recorder and the other end farther away from it OBecause Auto Focus makes adjustments at the center of an image, it may be impossible to focus on a subject that is located in both foreground and background. 2) Recording a subject behind dirty or dusty glass OBecause the focus is on the dirty glass, the subject behind the glass will not be focused. 3) Recording a subject in dark surroundings OBecause the light information that comes through the lens decreases considerably, the Camera Recorder cannot focus correctly. [. . . ]