User manual PANASONIC AG-6851

[. . . ] These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning: To assure continued FCC emission limit compliance, the user must use only shielded interface cable when connecting to external units. [. . . ] ZOOM Adjusting the mic input audio level MENU d) I P T (B NU 4 K CH1 8 CH2 -30 -20 -10 -0 ITEM SET PS MN T RTR UH EU O EUN 1 Hold down the MENU button until the AUDIO LEVEL SETUP screen appears. O In CAMERA mode, the screen selected for the MIC ·A_IN MODE item setting will appear. On this screen, the mic input level adjustment will take precedence. In the VCR mode, the screen selected for the MONITOR LEVEL item setting will appear and the headphone and speaker output level adjustments will take precedence. O On the AUDIO LEVEL SETUP screen, the unit's operation status is displayed at the top right of the screen. ADOLVLSTP UI EE EU PUE AS MNTRLVL OIO EE [ ]?­ ­ [ ] ­ ­­+ MCAI MD AT MNA I·_N OE UO AUL PB. ZOOM 4 Press the multi dial. ADOLVLSTP UI EE EU PUE AS MNTRLVL OIO EE [ ]?­ ­ [ ] ­ ­­+ SHUTTER/IRIS PUSH VOL/JOG MCAI MD MNA I·_N OE AUL MCAI LVL I·_N EE ­­+ [ ]?ZOOM d) I P T (B NU 4 K CH1 8 CH2 -30 -20 -10 -0 ITEM SET PS MN T RTR UH EU O EUN "1 " appears on the left of the level meter under the MIC ·A_IN LEVEL item. MENU 5 Turn the multi dial to adjust the audio level of the microphone input. ADOLVLSTP UI EE EU PUE AS MNTRLVL OIO EE [ ]?­ ­ [ ] ­ ­­+ SET SHUTTER/IRIS PUSH MENU d) I P T (B NU 4 K CH1 8 CH2 -30 -20 -10 -0 ITEM VOL/JOG MCAI MD MNA I·_N OE AUL MCAI LVL I·_N EE ­­­[] [ ]?­ ­ ­ ­ + ­ MENU PB. The VCR (green) lamp lights, and the VCR mode is established. CAMERA VCR POWER ON MODE OFF 1 90° O Play back the tape using the various function buttons. ­V C/REW PLAY FF/ B STILL ADV PAUSE STILL ADV INDEX STOP INDEX SELECT C/REW PLAY FF/ B STILL ADV PAUSE STILL ADV INDEX STOP INDEX SELECT Press this to play back the tape while the camera-recorder is in the stop mode. When it is pressed while the tape is playing back, the variablespeed search mode is established, and "1k" is displayed. (Press the VAR. SEARCH button to establish the variable speed search mode using the remote control unit. ) C/REW PLAY FF/ B ­V ­V STILL ADV PAUSE STILL ADV INDEX STOP INDEX RESET SELECT Press this to fast forward the tape while the camera-recorder is in the stop mode. While the tape is playing back, it plays back the tape at 10 times the normal tape speed. SEARCH DIGITAL ZOOM SEARCH REC BARS PHOTO SHOT C/REW PLAY FF/ B STILL ADV PAUSE STILL ADV MODE CHK ZEBRA OIS INDEX STOP INDEX ­V SELECT When this button is pressed while the tape is playing back, the camera-recorder is set to the playback pause mode. PLAY FF/ B ­V AUTO MANUAL C/REW STILL ADV PAUSE STILL ADV INDEX STOP INDEX SELECT Press this to stop the tape. Tape protection mode In order to protect the tape, this camera-recorder is automatically set to the stop mode if it is left for more than 5 minutes or so in the playback pause or recording pause mode. It is set to the stop mode sooner in low temperatures. 49 PLAYBACK Press this to rewind the tape while the camera-recorder is in the stop mode. While the tape is playing back, it reviews the tape at 10 times the normal tape speed. Normal playback (cont. ) Adjusting the volume You can adjust the speaker volume when a tape is being played back. The adjustment will be reflected in the headphone volume. Connecting a TV to view images When the camera-recorder is connected to a TV set using the accessory AV cable or S-video cord (option), you can view the playback images on the TV screen. 1 Hold down the multi dial until the audio level 1 Connect the camera-recorder to the TV set. meter is displayed. (P56) 2 Start playback. SHUTTER/IRIS PUSH VOL/JOG V L M [ ]?­ ­ [ ] OUE ­ ­­+ O Press the OSD button on the remote control unit to display the information (counter, mode displays) appearing on the LCD monitor and viewfinder on the TV screen. The displays are cleared when the OSD button is pressed again. START/ STOP 2 Turn the multi dial to adjust the volume. SHUTTER/IRIS PUSH OSD DATE/ TIME PHOTO SHOT COUNTER RESET MULTI/ P-IN-P TITLE ZOOM VOL/JOG TITLE ZOOM FF/ B V L M [ ]?­ [ ] OUE ­ ­+ ­ VOL + A. DUB Checking the shooting date and time You can display the shooting date and time on the screen by pressing the DATE/TIME button on the remote control unit while a tape is playing back. [. . . ] 5 If the images are not clear, repeat steps 1 to 4. (Do not use the cleaning tape more than 4 times in one go. ) O Do not rewind the cleaning tape at any interim point while it is playing. When it reaches the end, rewind it and use it again in the same way from the start. O If the heads become dirty again immediately after they have been cleaned, it may mean that the condition of cleaning tape itself has deteriorated. [. . . ]