User manual PANASONIC AG-A571

[. . . ] Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your camera. Be sure to retain this manual as your convenient camera information source. Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Serial No. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. [. . . ] Depending on the zoom magnification, there are iris values that are not displayed. To return to auto setting, press the iA/MANUAL button again. When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value. 72 VQT2W55 Manual focus adjustment If auto focusing is difficult due to the conditions, then use Manual Focus. Press the iA/MANUAL button to switch to Manual Mode. (l 70) 1 (When MF assist function is used) Select the menu. : [RECORD SETUP] # [MF ASSIST] # [ON] Touch F When [MF ASSIST] is [OFF], the blue area is not displayed. To restore Auto Focus, touch [AF] in step 3 or press the iA/MANUAL button again. The blue display does not appear on the images actually recorded. to display the manual icon. 2 3 4 Touch [FOCUS]. Adjust the focus by touching MF / MF . MF appears on the screen. MF :To focus on a close subject MF :To focus on a faraway subject MF MF MF MF F FOCUS WB SHTR IRIS A Part displayed in blue The in-focus area is displayed in blue. The normal screen returns approximately 2 seconds after you finish bringing the subject into focus. 73 VQT2W55 Advanced Playback (Advanced) 1 Playback Operations Motion picture playback using operation icon For details on the basic playback operations, refer to page 35. Playback operation Playback display Operating steps Touch 5 during playback to fast forward. (Touch 6 to rewind. ) The fast forward/rewind speed increases if you touch 5/6 again. (The display on the screen changes from 5 to . ) Normal playback is restored when you touch . This will then be displayed as a thumbnail. A portion judged to be clearly recorded will be detected and displayed in thumbnail if you select [HIGHLIGHT]. 3 4 (When [MINUTES] is selected) Touch / to set the time. It can be set up to a maximum of 60 minutes. Touch [ENTER]. Touch the thumbnail to be played back. / . Next (previous) thumbnail can be displayed by touching Repeat playback Playback of the first scene starts after playback of the last scene finishes. : [VIDEO SETUP] # [REPEAT PLAY] # [ON] The indication appears on the full screen views. All the scenes are played back repeatedly. (When playing back motion pictures by date, all the scenes on the selected date are played back repeatedly. ) 76 VQT2W55 Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. : [VIDEO SETUP] # [RESUME PLAY] # [ON] If playback of a motion picture is stopped, scene. appears on the thumbnail view of the stopped The memorized resume position is cleared if you turn off the unit or change the mode. (The setting of [RESUME PLAY] does not change. ) Zooming in on a still picture during playback (Playback zoom) You can zoom in by touching a still picture during playback. 1 2 Touch the part you wish to zoom in on during still picture playback. The still picture is zoomed in on, centering on the part you touched. (k1 # k2 # k4) Touch / / / or drag the screen (l 26) to move the zoomed position. The location of the zoom displays for about 1 second when zooming in (zooming out) or moving the displayed location. The more picture is enlarged, the more its quality deteriorates. A Displayed location of the zoom Zooming out from the zoomed still picture Touch Touch to zoom out. [. . . ] . 54 Remaining number of still pictures . . 77 147 VQT2W55 Spanish Quick Use Guide/ Guía española para el uso rápido Insertar la batería Meta la batería insertándola en la dirección señalada en la figura. Insertar/extraer una tarjeta SD A Introduzca la batería hasta que dispare y se cierre. Carga de la batería Lámpara de acceso [ACCESS] A Cuando la unidad accede a la tarjeta SD, se enciende la lámpara de acceso. Abra la tapa de la tarjeta SD e introduzca (retire) la tarjeta SD en (de) la ranura correspondiente B. Coloque el lado de la etiqueta C en la dirección mostrada en la figura y empújela hasta que tope manteniéndola derecha. [. . . ]