User manual PANASONIC AG-A67P

[. . . ] · Do not leave the battery in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. · Do not disassemble the battery or dispose of it in fire. · Do not store in temperatures over 60°C (140°F). For Battery Pack · Use specified charger. [. . . ] This is a result of the readout method of the pickup device (MOS sensor), and is not a malfunction. · White, red, blue, and green spots may appear on the display when using slow shutter speeds. Shooting 51 Adjusting the shutter speed (continued) Synchro scan Adjust the shutter speed to match the frequency of the television or computer monitor to minimize the horizontal noise that appears when shooting such subjects. · If SYNC is displayed in grey, it cannot be used with the current recording format. This function will only operate for preset values for each recording format. Valid setting values will appear to the right of the adjustment value. 1080/50i, 70/50P: 1/50. 0 to 1/50. 0 sec 1080/5P, 70/5P: 1/5. 0 to 1/50. 0 sec 1 Set the AUTO/MANUAL switch to MANUAL to select manual mode. (Page 40) Function Navi. 2 Touch the LCD monitor and display the 3 Touch to display the operation menu. 4 Touch SYNC. · The shutter speed appears at the left of the screen. 5 Touch or to adjust the shutter speed for synchro scan. 6 Touch SYNC to close the operation menu. 7 Touch to close the Function Navi. · To activate a synchro scan setting, touch SHTR and switch to SYNCRO SCAN. (Page 51) · You can change the progressive mode in the setup menu with REC FORMAT in the RECORD SETUP screen. The SCENE1 setting is applied when you restart the camera. 54 Initializing scene files You can return current setting values to their factory default settings. 1 Set the POWER switch to ON. (Page 26) · The CAMERA lamp lights red. 2 Press the MENU button. 3 Touch SCENE1 or SCENE2 for FILE SELECT in the setting menu SCENE FILE screen. setting menu SCENE FILE screen. 4 Touch INIT for LOAD/SAVE/INIT in the 5 Touch YES when the confirmation message appears. · The scene file selected in the FILE SELECT item will be initialized. · "SCENE 1 (or SCENE) LOADED TURN POWER OFF" appears on the screen. The default settings will be applied when you restart the camera. 55 Shooting Clip metadata You can add the name of the videographer, shooting location, text memos and other information to the video data you have recorded on the SD Memory Card. Display clip metadata with the META DATA PROP item (Page 103) in the setting menu RECORD SETUP screen. There are two kinds of clip metadata: the data that is recorded automatically during shooting, and the data in the metadata upload file created on the SD Memory Card which is loaded in the unit. (Loading method: Next page) 1 If there is no information in the metadata upload file, consecutive five-digit numbers will be applied to the clips in the order that they were recorded, with the first clip to be recorded being given the number 0. The USER CLIP NAME recording method is selectable. [. . . ] · Do not leave SD Memory Cards in areas where corrosive gases, etc. · Do not leave the cards inside vehicles, in places exposed to direct sunlight or in other places where the temperature is high. · Do not leave the cards where the humidity level is high or where there are high concentrations of dust. 117 Reference Recording format Recording mode 1080/50i PH 70/50P HA HG HE 1080/50i 1080/50i 1080/50i 70/50P 1080/50i 1080/50i 1080/50i Frame rate 50 1080/50i 5P 1080/5P (over 50i) 70/5P (over 50P) ­ ­ ­ 118 How to handle data recorded on SD Memory Card Data recorded in AVCHD format offers excellent Drive: \ compatibility with computers due to the file type, PRIVATE but since this format includes not only video AVCHD and audio data, but also a variety of important information, the folder structure will consist of file AVCHDTN associations as illustrated in the diagram on the BDMV right. If even part of this information is modified or CLIPINF deleted, the data may no longer be recognized as PLAYLIST AVCHD data, or the memory card may not longer be able to be used with AVCHD devices. [. . . ]