User manual PANASONIC AG-DVX100A

[. . . ] Ò NTSC Digital Video Camera Recorder Model AGP Before operating this product, please read the instructions carefully and save this manual for future use. P Printed in Japan F0903T1093 @ VQT0F36-1 IMPORTANT "Unauthorized recording of copyrighted television programs, video tapes and other materials may infringe the right of copyright owners and be contrary to copyright laws. " CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] OEven when a scene file has been changed during recording, the progressive mode will not be changed. To change this mode, establish the recording standby mode. F1: SCENE File containing the settings suited to standard shooting F2: SCENE FLUO. File containing the settings suited to shooting where consideration is given to the characteristics of fluorescent lights (for shooting indoors, etc. ) F3: SCENE SPARK File containing the settings suited to shooting for accentuating the subjects (for shooting wedding receptions, etc. ) F4: SCENE B-STR File containing the settings suited to shooting with extended gradations for the dark areas (for shooting scenes at dusk, etc. ) F5: SCENE 24P File containing the settings suited to shooting in the progressive 24P mode F6: SCENE ADVANC File for the progressive 24P advanced mode 36 Scene files Changing the scene file settings Scene file settings can be changed. In addition, scene files in which changes have been made can be stored in the positions of the scene file dial. 6 The screen shown below appears. Set a filename consisting of six characters using the OPERATION lever. OCharacters which can be set ) (space), letters A to Z, numbers 0 to 9, :, ;, <, =, >, ?, @, [, ¥, ], ^, _ NM EI AE DT S PSTO F W OIIN 1 1 Set the camera recorder's POWER switch to ON. 2 Turn the scene file dial, and select the scene file in which changes are to be made. 3 Change +:UHPA PS LY ­:UHSO PS TP SLPS SIL E:UH TL PS MN T RTR UH EU O EUN the item on the setting menu SCENE FILE screen. OFor details on the menu operations, refer to page 39. 7 Upon completion of the filename setting, press the MENU button. 4 Tilt the OPERATION lever in the 4 direction and move to the NAME EDIT item. SEEF: CN 1 : VDTI FE EAL RQ PORSIE RGESV NM EI AE DT 8 Tilt the OPERATION lever in the 4 direction and move to the SAVE/INIT item. : VDTI FE EAL RQ PORSIE RGESV NM EI AE DT SV/NT AEII TI HN F H OF ­­ E H ­­ YS ­­ H ­­ SEEF: CN 1 222222 TI HN F H OF ­­ H ­­ ­­ E H ­­ YS SV/NT AEII PS MN T RTR UH EU O EUN PS MN T RTR UH EU O EUN 5 Press ";" of the OPERATION lever, and move "1" to YES. SEEF: CN 1 : VDTI FE EAL RQ PORSIE RGESV NM EI AE DT 9 Press ";" of the OPERATION lever, and move "1" to YES. SEEF: CN 1 222222 : VDTI FE EAL RQ PORSIE RGESV NM EI AE DT SV/NT AEII TI HN F H OF ­­ H E ­­ YS ­­ H ­­ TI HN F H OF ­­ H ­­ ­­ H E ­­ YS SV/NT AEII PS MN T RTR UH EU O EUN PS MN T RTR UH EU O EUN 37 Scene files 10 The screen shown below appears. Press FL F: I E 1 222222 SV AE ";" of the OPERATION lever, and move "1" to YES. To return the scene file settings to the factory settings, select INITIAL in step 10, and then perform the same steps 11 to 13. IIIL NTA ­­ E H ­­ YS ­­ H ­­ PS MN T RTR UH EU O EUN 11 The screen shown below appears. Tilt the OPERATION lever in the 4 direction, select YES, and press ";" of the OPERATION lever. FL F: I E 1 222222 SV ?UH TL YS E 12 A beep sounds ten times in succession, the following message appears, and the scene file changes are completed. SV AE CMLTD!OPEE 13 Press the MENU button three times to release the menu mode. If the menu mode is released without saving the changes, the original scene file settings will be restored when operation is switched to the VCR mode or the power is turned off. 38 Setting menus The camera recorder's settings can be changed to suit the scenes to be shot or what is to be recorded using the setting menus. 4 Tilt the OPERATION lever in the 3 or 4 Operation method direction, and move the highlighted part to the function which is to be set. (If the remote control unit is used, press the "V" or "B" button among the SET buttons. ) Example: OHRFNTOS TE UCIN RMT EOE D CNRL V OTO D CDSL VM E RCLM E AP C1 HV R F HO F E HR C P OF F FOT RN RA HBT ER OH N HO 1 In any operation mode except the shooting mode or recording mode, press the MENU button. The menu mode is established, and the function screen shown below appears in the viewfinder and on the LCD monitor. [Camera mode] CMR MN AEA EU 1SEEFL . CN IE 2CMR STP . AEA EU 3S MD . W OE 4AT S . UO W 5RCRIGSTP . EODN EU 6DSLYSTP . IPA EU 7OHRFNTOS . TE UCIN BE SUD EP ON ; PS MN T RTR UH EU O EUN 5 Press ";" of the OPERATION lever, and move "1 " to the setting which is to be changed. (If the remote control unit is used, press the "M" button among the SET buttons. ) PS MN T EI UH EU O XT [VCR mode] VRFNTOS C UCIN 1PABC FNTOS . LYAK UCIN 2RCRIGSTP . EODN EU 3A I/U STP . V NOT EU 4DSLYSTP . IPA EU 5OHRFICIN . TE UNTOS To change a numerical value, for example, move "1 " to the position of the value to be changed, tilt the OPERATION lever in the 3 or 4 direction, and change the setting. (If the remote control unit is used, press the "V" or "B" button among the SET buttons. ) Example: OHRFNTOS TE UCIN PS MN T EI UH EU O XT RMT EOE D CNRL V OTO C1 HV R F HO F E HR C P OF HFOT F RN RA ER BT OH N HO 2 Tilt the OPERATION lever in the 3 or 4 direction, and move the highlighted part to the function which is to be set. (If the remote control unit is used, press the "V" or "B" button among the SET buttons. ) D CDSL VM E RCLM E AP BE SUD EP ON ; PS MN T RTR UH EU O EUN 3 Press ";" of the OPERATION lever, and 6 To change another item, repeat steps 4 and display the setting item. (If the remote control unit is used, press the "M" button among the SET buttons. ) Example: OHRFNTOS TE UCIN RMT EOE D CNRL V OTO D CDSL VM E RCLM E AP V 1 C2 C HV R V R OF F F HO F E HR C P OH HB T 5. To exit the settings, press the MENU button to return to the function screen. 7 To change another function, repeat steps 2 to 5. To exit the menu mode, press the MENU button to return to the normal screen. B E S U D HO EP ON N ; PS MN T RTR UH EU O EUN 39 Setting menus Configuration of setting menus Menus in the camera mode SCENE FILE CAMERA SETUP SYNCRO SCAN ASPECT CONV COLOR BAR SETUP MID GAIN HIGH GAIN ATW HANDLE ZOOM IRIS DIAL USER1 USER2 USER3 A. IRIS AGC ATW AF ZEBRA DETECT 1 ZEBRA DETECT 2 MARKER VIDEO OUT OSD DATE/TIME LEVEL METER ZOOM·FOCUS TAPE·BATTERY OTHER DISPLAY LCD BACKLIGHT LCD SET EVF SET SELF SHOOT EVF MODE EVF COLOR DETAIL LEVEL V DETAIL LEVEL DETAIL CORING CHROMA LEVEL CHROMA PHASE COLOR TEMP MASTER PED A. IRIS LEVEL GAMMA KNEE MATRIX SKIN TONE DTL V DETAIL FREQ PROGRESSIVE NAME EDIT SAVE/INIT SW MODE AUTO SW RECORDING SETUP DISPLAY SETUP REC SPEED AUDIO REC MIC ALC MIC GAIN 1 MIC GAIN 2 TC MODE TCG FIRST REC TC TC PRESET UB MODE UB PRESET INTERVAL REC REC TIME INTERVAL TIME OTHER FUNCTIONS Menus in the VCR mode PLAYBACK FUNCTIONS END SEARCH 32K(12bit)AUDIO AUDIO OUT A DUB INPUT DV OUT DATE/TIME LEVEL METER TAPE·BATTERY OTHER DISPLAY VIDEO OUT OSD CAMERA DATA LCD BACKLIGHT LCD SET EVF SET EVF MODE REMOTE DV CONTROL DV CMD SEL REC LAMP BEEP SOUND CLOCK SET TIME SHIFT TAPE PROTECT USER FILE HOUR METER RECORDING SETUP AV IN/OUT SETUP DISPLAY SETUP REC SPEED AUDIO REC 1394 TC REGEN TC MODE TCG FIRST REC TC TC PRESET 1394 UB REGEN UB MODE UB PRESET OTHER FUNCTIONS REMOTE CLOCK SET TIME SHIFT USER FILE HOUR METER 40 Setting menus SCENE FILE screen Item/ (display mode) DETAIL LEVEL (Camera) V DETAIL (Camera) Description of settings For adjusting the detail amount. ­7 --- 0 --- +7 For adjusting the strength of the outline compensation in the vertical direction of the images. ­7 --- 0 --- +7 For adjusting the level at which the noise in the detail signals is to be eliminated. [. . . ] O When cleaning or otherwise maintaining the camera recorder, either remove its battery or disconnect its AC cable from the power outlet. O Use a soft, clean cloth to wipe the camera recorder. To remove stubborn stains, dilute some kitchen detergent, dip a cloth into the solution and use it to wipe off the dirt, and then remove any remaining moisture with a dry cloth. Viewfinder maintenance When dust has collected inside the viewfinder, take off the eye cup holder, and remove the dust. [. . . ]