User manual PANASONIC AG-HMC150P

[. . . ] This product is eligible for the AVCCAM 3 Year Warranty Repair Program. For details, see page 5. Memory Card Camera-Recorder Model No. Before operating this product, please read the instructions carefully and save this manual for future use. S0808K1088 -M Printed in Japan D ENGLISH VQT1V33 Reference Menu Displays Editing Playback Shooting Preparation AG-HMC150P Description of parts Operating Instructions Before use Read this first! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] · In the case of the scene files, the current settings are automatically saved in the unit, and the saved data is written on an SD Memory Card. When data has been read from an SD Memory Card, the current settings are rewritten at the same time as the data saved inside the unit. · The data in all the scene files, F1 to F6, is rewritten. If you have saved a scene file 4 Push the Operation lever again, select YES when the following screen is displayed, and push the Operation lever. · In the following example, TITLE001 is the filename. (To change the filename, see the description below. ) 1 Set the unit's POWER switch to ON. 2 Select CARD READ/WRITE on the settings 5 Press the MENU button to exit the menu mode. To read files 1) Select READ in step 2 and push the Operation lever. 2) Select the file number and push the Operation lever. 3) Select YES on the confirmation screen. READ COMPLETED will be displayed when reading is complete. menu SCENE FILE screen, select WRITE, and push the Operation lever. For all other settings, select USER FILE. · For menu operations (Page 82) · Operations may also be performed using buttons on the remote control that correspond to those on the camera. For details, see "Description of parts (Remote control)". (Page 18) 3 Tilt the Operation lever in the directions, select the file number (1 - 4), and push the Operation lever. To add titles to files 1) Go through steps 1 - 3. 2) Tilt the Operation lever in the directions to select characters, and tilt in the direction to move to the next character. The following characters may be inputted. / 3) Push the Operation lever when all characters have been inputted. 4) Select YES on the confirmation screen. · If WRITE NG WRITE PROTECT appears, release the protected status of the SD Memory Card. · If WRITE NG CANNOT ACCESS appears, quit all other operations (such as playback) before proceeding. 52 Clip metadata You can add the video and audio systems, name of the videographer, shooting location, text memos and other information to the video data you have recorded on the SD Memory Card. (Display method: Page 68) There are two kinds of clip metadata: the data that is recorded automatically during shooting, and the data in the metadata upload file created on the SD Memory Card which is loaded in the unit. [. . . ] · To mount the eye cup holder, align the ridges and grooves of the eye cup holder and camerarecorder, and turn clockwise until the holder clicks into place. Eye cup holder Eye cup Projections 106 Storage Precautions Before storing the camera-recorder, remove both the SD Memory Card and battery. Store all of these items in a place with low humidity and relatively constant temperature. [Recommended temperature range: 15°C to 25°C (59 °F to 77 °F )] [Recommended relative humidity: 40% to 60%] Camera-recorder · Wrap the camera-recorder in a soft cloth to keep the dust off. Battery · The battery life is shortened in places with extreme temperatures. [. . . ]