User manual PANASONIC AG-HPG20

[. . . ] Memory Card Portable Recorder Model No. Model No. AG-HPG20P AG-HPG20E AG-HPG2 0 FRANÇAIS Pour des explications en français, veuillez vous reporter au CD-ROM fourni. ESPAÑOL Para la explicación en español, consulte el CD-ROM uministrado. Before operating this product, please read the instructions carefully and save this manual for future use. F0109T0 -M D Printed in Japan Menu For your reference ENGLISH VQT1X51 Displays Editing Saving data Recording Playback Preparations Name of the parts This product is eligible for the P2HD 5 Year Warranty Repair Program. For details, see page 6. Operating Instructions Introduction Read this first! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] When the button is held down, the speed increases. (The maximum speed is determined according to the setting value for "SPEED MAX" on the setting menu "PLAYBACK FUNCTIONS" (Page 99). ) or is displayed during operation. . To return to normal playback, press · Playback is repeated until is pressed. · If "SELECTED CLIPS" is not selected for the thumbnail display setting, all the currently displayed clips which can be played back will be played back repeatedly. · To turn off the repeat playback setting, select "OFF" in step 3. · When rapid forward or rapid reverse playback is performed during repeat playback, playback stops after the first playable clip or last playable clip is played back. 5 Playback 1 Press [THUMBNAIL/MODE] to display the Clip playback (continued) Adding text memos 1 During recording, playback or thumbnail display, press [USER] to which the "TEXT MEMO" was allocated. · If you press this button during recording or playback, the text memo is added to the position at which the button is pressed. · If you press this button while the thumbnail display screen is displayed, the text memo is added to the clip's thumbnail image position (normally the beginning of the clip). · Up to 100 text memos can be added to one clip. · During playback, if you press the [USER] to which the "TEXT MEMO" was allocated, the playback image may tentatively stops. · The text memo can be added only at 1x speed or while paused. · During the single clip playback or LOOP REC, you cannot add a text memo. Playback from text memo position 1 Display the thumbnail display screen. Using , and , select "THUMBNAIL" ­ "TEXT MEMO CLIPS", and press . Thumbnails of the clips to which text memos were added now appear at the top of the LCD monitor screen. Information about the text memo of the clip pointed by the cursor appears at the bottom of the LCD monitor screen. The cursor moves here. 5 Using Thumbnail display area Indicated here are the still images located at the text memos. Indicated here is the total number of text memos which were added to the clips. or , move the cursor to the number of the text memo to be played back, and press . Playback starts from the time code position of the text memo where the cursor is positioned. When playback ends at the end of the clip, the thumbnail screen is restored, and the cursor returns to the time code position where playback was started. When EXIT is assigned to the [USER], if you press [EXIT/2], the cursor returns to the top of the thumbnail screen. 6 Press [MENU/MODE CHK], and then select When the text memo display screen is displayed as above, the image by EE output is displayed BLACK. Using and , move the cursor to the clip which is to be played back, and press . The cursor moves to the bottom of the LCD monitor screen. · Text memos can be added while clips are being played back or recorded. Refer to the above "Adding text memos". Note that text memos Adding cannot be added during playback from the above text memo position. [. . . ] · When transferring the data on a multiple number of P2 cards to a personal computer, create the folder for each P2 card in order to prevent the same clip names from being overwritten. · Do not delete the data on P2 cards. · P2 cards must always be formatted using a P2 device prior to use. · "Microsoft" and "Windows" are the registered trademarks of Microsoft Corporation of the United States in the United States and other countries. · "Apple" and "Macintosh" are the registered trademarks of Apple Inc. , of the United States in the United States and other countries. [. . . ]