User manual PANASONIC AG-HPX170P

[. . . ] This product is eligible for the P2HD 5 Year Warranty Repair Program. For details, see page 5. Operating Instructions Memory Card Camera-Recorder Model No. AG-HPX170P Before operating this product, please read the instructions carefully and save this manual for future use. F0808T0 -P D Printed in Japan ENGLISH VQT1U92 Reference Menu Displays Editing Playback Shooting Preparation Description of parts Before use Read this first! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Press the mode button so the MCR lamp turns on. Each time you press the button, the mode changes as below. MCR v CAM When you press the mode button while MCR is selected, the unit enters the PC (PC connection) mode. (Page 81) Lock release 2 SLOT SEL CAM MCR PC MODE For details on playing back clips using thumbnails, see page . Operations using the Operation lever Play ( q) Use this button in stop mode to start playback from the beginning of the selected clip. During playback, the unit enters the variable speed search mode and starts 1x playback. (Page 74) Fast-forward ( y) Use this button during playback to fast-forward the selected clip (4 x speed). When the thumbnail screen is cancelled, you can also perform this operation while the camera is stopped. When this button is held down, the playback speed becomes faster (32 x speed). When pressed during a pause, playback advances one clip. Rewind (t ) Use this button during playback to rewind the selected clip (4 x speed). When the thumbnail screen is cancelled, you can also perform this operation while the camera is stopped. When this button is held down, the playback speed becomes faster (32 x speed). When pressed during a pause, playback goes back one clip. Stop ( g ) Remote Control /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX -V /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX Pause ( h ) Press again to return to playback. /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX -V -V -V -V Playback Thumbnail screen Video data created on the P2 card in one shooting session is called a clip. When the MCR mode has been established, the clips will be displayed on the LCD screen as thumbnails. (When there is a large number of clips, it will take some time for them to be displayed on the screen. ) You can perform the following operations using the thumbnail screen. Play, repair and delete clips, add and delete shot marks, as well as add text memos. Load the metadata (shooting information, etc. ) from SD memory cards to the unit. Basic thumbnail screen operations To use the thumbnail menu: 1 1 MENU 2 THUMBNAIL On the thumbnail screen, press the MENU button to display the menu. Push the Operation lever in the e or r direction and press it (or push it in the q direction). If another menu appears, repeat this step. To return to the previous screen, select EXIT and press the Operation lever or push it in the w direction. To release the menu mode, press MENU. PUSH-SET PAGE/AUDIO MON/VAR To select a clip: Push the Operation lever in the w or q direction to move the yellow frame to the clip you want to select, and press it again. [. . . ] Press the MENU button and select META DATA " PROPERTY " USER CLIP NAME to display the menu shown below. Select "COUNT RESET" with the cursor and press the Operation lever to reset the COUNT value to 1. Clip 2 Clip 1 COUNT value = 0001 COUNT value = 0002 10 min. 5 min. Example of recording a clip on two P2 cards: REC start (recording start) REC/PAUSE (recording pause) Clip 2 Clip 1 COUNT value = 0003 COUNT value = 0004 1st card 2nd card If the clip thumbnails are displayed as shown in the example above or their properties are indicated using a P2 device, the thumbnail and COUNT value of clip 1 will be displayed. 1 Specifications [GENERAL] Supply voltage: DC7. 2 V/7. 9 V Power consumption 10. 9 W (when the LCD monitor is not used) 11. 7 W (when the LCD monitor is used) 13. 8 W (max. ) indicates safety information. Ambient operating temperature 0 C to 40 C (32 F to 104 F) Ambient operating humidity 10% to 85% (no condensation) Weight 1. 9 kg (4. 2 lb) (excluding battery and accessories) Dimensions (W x H x D) 154 mm x 179. 5 mm x 397 mm (6-1/8 inches x 7-1/8 inches x 15-3/4 inches) [Camera] Pickup devices CCD image sensor (x3) (1/3-inch, interline transfer, progressive-capable) Lens LEICA DICOMAR Optical image stabilizer lens, Motorized/Manual selectable 13x zoom, F1. 6 to 3. 0 (f = 3. 9 mm to 51 mm) (35 mm equivalent: 28 mm to 368 mm) Color separation optical system Prism system ND filter 1/4, 1/16, 1/64 Gain settings 0/+3/+6/+9/+12/+18 dB (60i/60P mode) 0/+3/+6/+9/+12 dB (30P/30PN/24P/24PA/24PN mode) Shutter speed settings Preset 60i/60P mode 1/60 (OFF), 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000 sec. [. . . ]