User manual PANASONIC AG-HVX200

[. . . ] Memory Card Camera-Recorder Model No. AG- P Before operating this product, please read the instructions carefully and save this manual for future use. F1205S3046-H D Printed in Japan ENGLISH VQT0S52-3 Reference Menu Displays Editing Playback Shooting Preparation Description of parts Operating Instructions Before use CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: THE AC RECEPTACLE (MAINS SOCKET OUTLET) SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. [. . . ] THUMBNAIL SIZE: Select LARGE (3x2) or NORMAL (4x3) for full-screen displays of thumbnails. THUMBNAIL INIT: Select this to return all the above settings to the factory (initialization) settings. EXIT: Select this to return to the last screen. 5 Press the MENU button to release the menu mode. 68 P2 Deleting clips and formatting cards (OPERATION) You can perform any of the following operations. If necessary, make preparations prior to undertaking the operations. Deleting clips Select the clip to be deleted, and then press the button. Formatting P2 cards or SD memory cards Insert the card to be formatted into the unit. When a card is formatted, all its data will be deleted. Repairing defective clips Select the defective clip (indicated by X ) to be repaired. (Clips indicated by the red defective clip indicator cannot be repaired. ) REPAIR CLIP: Select this to repair defective clips. Select YES to repair the clip or NO to cancel the repair, and press the button. When clips are repaired, the TEXT MEMO data is deleted. EXIT: Select this to return to the last screen. 4 Press the MENU button to release the menu mode. When clips have been copied by operating Explorer, for instance, the "!" indicator may appear on the clips. If this happens, "!" can sometimes be released by downloading the latest version of the P2 viewer from the web site given below, installing it in your computer, and copying the clips again. https://eww. pavc. panasonic. co. jp/pro-av/ Playback 1 On the thumbnail screen, press the MENU button. (Page 64) 2 Select OPERATION using the button, and press the (or and ) button. 3 Select the desired item using the buttons, and press the button. and DELETE: Select this to delete the selected clip. Select YES to delete the clip or NO to cancel the deletion, and press the button. FORMAT: Select this to format a P2 card or SD memory card. When you move to FORMAT, the card selection screen will appear. Select the P2 slot (SLOT1 or SLOT2) or select SD CARD, and press the button. Select YES to format the card or NO to cancel the formatting, and press the button. 69 Thumbnail operations (continued) Checking the clip or card information (PROPERTY) You can perform any of the following operations. If necessary, make preparations prior to undertaking the operations. [. . . ] The COUNT value can be reset using the following procedure. Press the MENU button and select META DATA PROPERTY USER CLIP NAME to display the menu shown below. Select "COUNT RESET" with the cursor and press the SET button to reset the COUNT value to 1. If the clip thumbnails are displayed as shown in the example above or their properties are indicated using a P2 device, the thumbnail and COUNT value of clip 1 will be displayed. 130 Specifications [GENERAL] Supply voltage: DC7. 2 V/7. 9 V Power consumption 11. 6 W (when the viewfinder is used) 12. 0 W (when the LCD monitor is used) 14. 0 W (max. ) indicates safety information. Ambient operating temperature 0 C to 40 C (32 F to 104 F) Ambient operating humidity 10% to 85% (no condensation) Weight 2. 5 kg (5. 5 lb) (excluding battery and accessories) Dimensions (W x H x D) 168. 5 mm x 180. 0 mm x 390. 0 mm (6-5/8 inches x 7-1/16 inches x 15-3/8 inches) [Camera] Pickup devices CCD image sensor (x3) (1/3-inch, interline transfer, progressive-capable) Lens LEICA DICOMAR Optical image stabilizer lens, Motorized/Manual selectable 13x zoom, F1. 6 (f = 4. 2 mm to 55 mm) (35 mm equivalent: 32. 5 mm to 423 mm) Color separation optical system Prism system ND filter 1/8, 1/64 Gain settings 0/+3/+6/+9/+12/+18 dB (60i/60P mode) 0/+3/+6/+9/+12 dB (30P/30PN/24P/24PA/24PN mode) Shutter speed settings Regular shutter speed 60i/60P mode: 1/60 (OFF), 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000 sec. 30P/30PN mode: 1/30, 1/50 (OFF), 1/60, 1/120, 1/250, 1/500, 1/1000 sec. [. . . ]