User manual PANASONIC AG-HVX200A

[. . . ] Memory Card Camera-Recorder Model No. Before operating this product, please read the instructions carefully and save this manual for future use. F0208T0 -P D Printed in Japan ENGLISH VQT1Q85 Reference Menu Displays Editing Playback Shooting Preparation AG-HVX200AP Description of parts Operating Instructions Before use Read this first! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. indicates safety information. CAUTION: Danger of explosion or fire if battery is mistreated. [. . . ] Proceed to step 4 only when you have selected SETUP. 68 P2 4 Select the desired setting item using the and buttons, and press the button. MARKED IND. : Select this to set whether the shot mark indicator is to be displayed (ON/OFF). TEXT MEMO IND. : Select this to set whether the text memo indicator is to be displayed (ON/OFF). VOICE MEMO IND. : Select this to set whether the voice memo indicator is to be displayed (ON/OFF). WIDE IND. : Select this to set whether the wide indicator is to be displayed (ON/OFF). PROXY IND. : Select this to set whether the proxy indicator is to be displayed (ON/OFF). DATA DISPLAY: Select the time code (TC), user information (UB), shooting time (TIME), shooting date (DATE) or shooting date (DATE TIME) for the area where the clip time is displayed. DATE FORMAT: Select year/month/day (YMD), month/day/ year (MDY) or day/month/year (DMY) as the order for displaying the recording date/time. This format will be the same for the recording date displayed by the clip properties and the recording date displayed by DATA DISPLAY. THUMBNAIL SIZE: Select LARGE (3x2) or NORMAL (4x3) for full-screen displays of thumbnails. THUMBNAIL INIT: Select this to return all the above settings to the factory (initialization) settings. EXIT: Select this to return to the last screen. 5 Press the MENU button to release the menu mode. 69 Playback Thumbnail operations (continued) Deleting clips and formatting cards (OPERATION) You can perform any of the following operations. If necessary, make preparations prior to undertaking the operations. Deleting clips Select the clip to be deleted, and then press the button. Formatting P2 cards or SD memory cards Insert the card to be formatted into the unit. When a card is formatted, all its data will be deleted. Repairing defective clips Select the defective clip (indicated by X ) to be repaired. (Clips indicated by the red defective clip indicator cannot be repaired. ) P2 REPAIR CLIP: Select this to repair defective clips. Select YES to repair the clip or NO to cancel the repair, and press the button. The SHOT MARK and TEXT MEMO data are deleted when a clip is repaired. REPAIR CLIP (LOOP): Select this to repair defective clips that were shot with loop recording. EXIT: Select this to return to the last screen. 4 Press the MENU button to release the menu mode. [. . . ] The COUNT value can be reset using the following procedure. Press the MENU button and select META DATA PROPERTY USER CLIP NAME to display the menu shown below. Select "COUNT RESET" with the cursor and press the SET button to reset the COUNT value to 1. If the clip thumbnails are displayed as shown in the example above or their properties are indicated using a P2 device, the thumbnail and COUNT value of clip 1 will be displayed. 133 Reference Specifications [GENERAL] Supply voltage: DC7. 2 V/7. 9 V Power consumption 11. 6 W (when the viewfinder is used) 12. 0 W (when the LCD monitor is used) 14. 0 W (max. ) indicates safety information. Ambient operating temperature 0 C to 40 C (32 F to 104 F) Ambient operating humidity 10% to 85% (no condensation) Weight 2. 5 kg (5. 5 lb) (excluding battery and accessories) Dimensions (W x H x D) 168. 5 mm x 180. 0 mm x 390. 0 mm (6-5/8 inches x 7-1/16 inches x 15-3/8 inches) [Camera] Pickup devices CCD image sensor (x3) (1/3-inch, interline transfer, progressive-capable) Lens LEICA DICOMAR Optical image stabilizer lens, Motorized/Manual selectable 13x zoom, F1. 6 to 2. 8 (f = 4. 2 mm to 55 mm) (35 mm equivalent: 30. 3 mm to 394 mm) Color separation optical system Prism system ND filter 1/8, 1/64 Gain settings 0/+3/+6/+9/+12/+18 dB (60i/60P mode) 0/+3/+6/+9/+12 dB (30P/30PN/24P/24PA/24PN mode) Shutter speed settings Regular shutter speed 60i/60P mode: 1/60 (OFF), 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000 sec. 30P/30PN mode: 1/30, 1/50 (OFF), 1/60, 1/120, 1/250, 1/500, 1/1000 sec. [. . . ]