User manual PANASONIC AG-RT600

[. . . ] 1080/50p motion pictures can be saved and played back with this unit or the HD Writer AE 3. 0. * This means the highest quality for this unit. iFrame: This is a recording format suitable for viewing and editing on a Mac (iMovie'11). Using iMovie'11, iFrame motion pictures can be imported faster than AVCHD motion pictures. [. . . ] (Touch 6 to rewind. ) The fast forward/rewind speed increases if you touch 5/6 again. (The display on the screen changes from 5 to . ) Normal playback is restored when you touch . During playback, touch the LCD monitor and slide quickly from right to left (from left to right) before releasing your finger. With the playback paused, continue touching . ( is for slow rewind playback) Playback is slow while touching. Normal playback is restored when you touch . When slow-motion pictures are played back in reverse, they will be shown continuously at approximately 2/3rd the speed of normal playback (intervals of 0. 5 seconds). Slow-motion playback for iFrame scenes will be in 1 second intervals. (Touch to advance the frames one at a time in the reverse direction. ) Normal playback is restored when you touch . When the frames are advanced one at a time in the reverse direction, they will be shown in intervals of 0. 5 seconds. Frame-by-frame playback for iFrame scenes will be in 1 second intervals. Fast forward/ rewind playback During Playback Skip playback (to the start of a scene) Slow-motion playback During Pause Frame-by-frame playback The motion picture is advanced one frame at a time. - 72 - Playback operation Playback display Operating steps Touch the direct playback bar or slide it while touching. (l 17) ALL A Date select icon 2 3 Touch the playback date. Touch the scene or the still picture to be played back. The scenes or the still pictures recorded on the date selected are displayed as thumbnails. Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode is changed. Even if AVCHD scenes are recorded on the same day, they are grouped separately when the number of scenes exceeds 99. is added after the recording date displayed on the screen. Even if AVCHD scenes or 1080/50p scenes are recorded on the same day, they are grouped separately whenever the AVCHD recording and 1080/50p recording are switched. is added after the recording date displayed on the screen. Even if iFrame scenes are recorded on the same day, they are grouped separately in the following cases. j When the number of scenes exceeds 99 j When [NUMBER RESET] is performed Even if still pictures are recorded on the same day, they are grouped separately in the following cases. j When the number of still pictures exceeds 999 j When pictures are recorded in hi-speed burst shooting mode ( is indicated after the date in the list by date). j When [NUMBER RESET] is performed is displayed after the date in the list by date for the still pictures created from the motion picture. (l 73) - 76 - Highlight playback Part that was recognised as clearly recorded is extracted from a long recording, and it can be played back in a short time with effects and music added. [. . . ] Other names of systems and products mentioned in these instructions are usually the registered trademarks or trademarks of the manufacturers who developed the system or product concerned. This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard ("AVC Video") and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. [. . . ]