User manual PANASONIC AG-TL500

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. --2-- Failure to heed the following precautions may result in damage to the VCR, Remote or video cassette. . . . in an environment prone to extreme temperatures or humidity. . . . in an environment where strong magnetic fields are generated. . . . on a surface that is unstable or subject to vibration. [. . . ] You can select channel in the recording pause mode. Stop recording Press STOP (8) on the Remote. OR Press STOP/EJECT (0) on the VCR. S-VHS (Super VHS), S-VHS ET or VHS Recording Mode This VCR can record in S-VHS (Super VHS), S-VHS ET or VHS. To record in S-VHS: Set "S-VHS MODE" to "ON" ( pg. Then, insert a cassette marked "S-VHS". The S-VHS indicator lights up on the display panel. To record in S-VHS ET on a VHS cassette: Set "S-VHS ET" to "ON" ( pg. Then, insert a cassette marked "VHS". The S-VHS indicator lights up on the display panel. To record in VHS: Insert a cassette marked "VHS". Set "S-VHS ET" to "OFF" ( pg. Most TV listings have a section, usually a chart, indicating the guide channel numbers assigned to each station. To ensure that VCR Plus+ timer recording operates correctly, it is necessary to set the VCR Plus+ "Guide Channel Set" for each station. If you have moved to a different area or if a broadcasting station's channel number has been changed, perform the following steps to set the correct guide channel number. A Access Main Menu screen, then Initial Set screen Press MENU on the Remote. Press rt to move the highlight bar (arrow) to "INITIAL SET", then press OK or e. If the Guide Channel Set screen GUIDE CHANNEL SET appears after pressing OK, press the GUIDE CH : 12 VCR CH : ­ ­ ­ Number keys, CH+/­ or rt to input the number of the channel on which the broadcast for the PlusCode PRESS NUMBER KEY (0­9) OR ( , ), THEN (OK) number is received on the VCR. PRESS (PROG. ) TO END To set the tape speed, press SP/EP. To change the stop time, press STOP+/­. To timer-record daily (Monday­Friday) or weekly serials, press DAILY (M-F) (Number key "8") or WEEKLY (Number key "9"). Pressing the button again makes the "DAILY" or "WEEKLY" display disappear. If you made a mistake, press CANCEL to access the PlusCode No. If an incorrect PlusCode number or the one for a broadcast already finished has been inputted, "ERROR" is displayed for about 5 seconds, then the PlusCode No. screen reappears. B Access Guide Channel Set screen C Input guide channel number e. C Press OK or PROG. . Press rt to move the highlight bar (arrow) to "GUIDE CHANNEL SET", then press OK or e. GUIDE CHANNEL SET GUIDE CH : 6 VCR CH : ­ ­ ­ If "PROGRAM NOT COMPLETED PROGRAM OVERLAP" appears, see "Program overlap warning display" ( pg. [. . . ] Press and hold POWER 1 for more than 10 seconds to release the Child Lock function. 16) Press TIMER to disengage the timer. Press and hold POWER 1 for more than 10 seconds to release the Child Lock function. 17) The VCR is in the timer recording standby mode The clock works, but the with "AUTO TIMER" set to "OFF" ( pg. [. . . ]