User manual PANASONIC AG-VF5P

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. indicates safety information. Danger of explosion or fire if battery is mistreated. For Battery Pack · Replace only with same or specified type. · Do not disassemble or dispose of in fire. · Do not store in temperatures over 60°C (140°F). [. . . ] (The recording format remains unchanged even when the scene file is changed. It must be set using the REC FORMAT item on the RECORDING SETUP screen. (Page 91)) F6: SCENE CINE D File suitable for shooting movie-like scenes where the dynamic range is to be emphasized. (The recording format remains unchanged even when the scene file is changed. It must be set using the REC FORMAT item on the RECORDING SETUP screen. · For menu operation (Page 82) · Operations may also be performed using buttons on the remote control that correspond to those on the camera. For details, see "Description of parts (Remote control) ". (Page 18) 4 Tilt the Operation lever in the directions and select the NAME EDIT item. 5 Push the Operation lever (or tilt in the direction), tilt in the direction to select YES, and push the Operation lever again. 50 6 Set a 6-character filename with the Operation lever when the following screen is displayed. (Page 58) · Characters that can be set Space, A to Z, 0 to 9, : ; < = > ?@ [ ] ^_-. / If the RESET/TC SET button is pressed when the filename has been set, the characters are cleared. 7 After you finish setting the filename, push the Operation lever. 8 Select YES on the confirmation screen. · Selecting YES will close the NAME EDIT screen and confirm all changes. · Once confirmed, all changed names and values will be saved even if the power is switched off or the scene dial is moved. 51 Shooting Saving scene files and other settings on SD Memory Cards You can save up to four scene file settings or other settings as files on an SD Memory Card, and you can also load them from the card. (Loading method: Next page) SCENARIO:2 This indicates the PROGRAM NAME, SCENE NO. NEWS 1: This indicates the REPORTER (name of the reporter) and PURPOSE (purpose of data collection). NEWS 2: This indicates the OBJECT (target of data collection). MEMO:3 This indicates the PERSON (name of the person who recorded the text memo) and TEXT (contents of memo). 1 If there is no information in the metadata upload file, consecutive five-digit numbers will be applied to the clips in the order that they were recorded, with the first clip to be recorded being given the number 0. The USER CLIP NAME recording method is selectable. 2 When SCENARIO is to be input, you must input the PROGRAM NAME. 3 When MEMO is to be input, you must input TEXT. · Only printable ASCII characters can be displayed by this unit. · Due to the limitations imposed by this unit on the number of characters which can be displayed, not all the data can be displayed. (This does not mean that the data which is not displayed has been deleted. ) Use an AVCCAM viewer or other program to check all the data. [. . . ] · The interior of the eye cup holder is specially finished, so do not ever wipe it. If there is dust on it, blow it off with an air blower. · Remove the eye cup holder with the eye cup attached by rotating it counterclockwise. (It will be tightly screwed on. ) When you do this, tilt the viewfinder slightly upward. [. . . ]