User manual PANASONIC AJ-D440

[. . . ] The fact that the equipment operates satisfactorily does not imply that it is grounded, and the installation is not necessarily safe. For your safety, if in any doubt about the effective grounding of the equipment or power outlet, please consult a qualified electrician. CAUTION: Do not install or place this unit in a bookcase, built-in cabinet or any other confined space in order to maintain adequate ventilation. Ensure that curtains and any other materials do not obstruct the ventilation to prevent risk of electric shock or fire hazard due to overheating. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. $ DO NOT REMOVE PANEL COVER BY UNSCREWING. To reduce the risk of electric shock, do not remove cover. Refer servicing to qualified service personnel. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, REFER MOUNTING OF THE OPTIONAL INTERFACE BOARD TO QUALIFIED SERVICE PERSONNEL. CAUTION: THE AC OUTLET (MAINS SOCKET) SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, REFER CHANGE OF SWITCH SETTING INSIDE THE UNIT TO QUALIFIED SERVICE PERSONNEL. WARNING: OTO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. [. . . ] 1: The displays are superimposed onto VIDEO OUT2. 2: The displays are superimposed onto the HD component output (Y). 3: The displays are superimposed onto SD SDI OUT. 4: The displays are superimposed onto HD SDI OUT. 5: The displays are superimposed onto VIDEO OUT2 and SD SDI OUT. 6: The displays are superimposed onto the HD component output (Y) and HD SDI OUT. 005 SUPER 0000 0001 0002 20003 20004 20005 20006 OFF CMPST CMPNT 2SDSDI 2HDSDI 2CPS&SD 2CPN&HD <Note> Even when OFF is selected as the menu item No. 005 [SUPER] setting, the superimposing will be displayed in accordance with what is set using menu item No. 006 [DISPLAY SEL] during the menu settings. Once the menu settings are exited, the display follows the setting selected for menu item No. 005 [SUPER]. 2 This appears when the AJ-YA120AG (optional accessory) has been installed. " " indicates the factory setting. 006 Superimposed display DISPLAY SEL 0000 0001 0002 0003 0004 0005 0006 0007 0008 0009 No. Setting Superimposed display Description of settings For setting what the information to be superimposed. ("Data" refers to the CTL, TC or UB value selected by the COUNTER button. ) T&STA 1: The data and operation status are displayed. 1080i 0: 1080i mode 720p 1: 720p mode For setting the format in which to play back the tape. MANUAL 0: The tape is played back in the format selected by the menu item No. 020 [SYS FORMAT] setting. AUTO 1: The tape is played back in the format selected by the format in which the tape was recorded. For selecting the format when MANUAL is selected as the menu item No. 022 [PB FORMAT] setting. 0: The DVCPRO HD-LP format is selected, and the format follows the menu item No. 020 [SYS FORMAT] setting. 1: The DVCPRO HD format is selected, and the format follows the menu item No. 020 [SYS FORMAT] setting. 2: The DVCPRO50 (422) format is selected. 4: The DVCPROP (420p) format is selected. 6: The DVCAM format is selected. For setting the field frequency. 59/23 0: The field frequency is set to 59. 94/23. 98 Hz. 60/24 1: The field frequency is set to 60/24 Hz. [. . . ] O Follow the steps below after making absolutely sure that the unit's power has been turned off. 2 Use a Phillips-head screwdriver to push in the red plastic gear (A) and turn it counterclockwise while keeping it pushed in. The mechanism that winds up the tape is activated by this, and it makes a latching sound. Ignore the sound, and turn the gear through about 10 revolutions. [. . . ]