User manual PANASONIC AJ-D92P

[. . . ] Digital Video Cassette Recorder AJ- P Operating Instructions Printed in Japan VQT8368 P F1099W @ IMPORTANT "Unauthorized recording of copyrighted television programs, video tapes and other materials may infringe the right of copyright owners and be contrary to copyright laws. " CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. [. . . ] Preventing erroneous recording operations O During recording, the unit will not respond to the pressing of any of the function buttons except STOP and PAUSE/STILL. (This is to prevent the transfer to another mode during recording. ) O When the KEY INHIBIT switch is set to ON, all the function buttons except for the ones set using setup menu item No. Under the initial settings, none of the function buttons except for STOP and EJECT will work. When ENA has been selected as the setup menu item No. 000 setting, all the function buttons are made operable. 5. Auto back function In order to ensure frame-to-frame continuity, this function automatically rewinds the tape for approximately 1 second after REC PAUSE and stops the tape. When recording is to be resumed, the tape begins its approach and after it is completely on-track, recording is resumed. In this way, continuous recording free from disruptions can be ensured. To initiate frame-to-frame continuity after a break has been searched for in the playback mode 1 23 32 Playback Preparing for playback 1. Selecting the sound to be monitored 1 2. Playback in synchronization with the external signals VIDEO IN connector 2 Video input selector switch PHONE switch to 1 Use thewhich is SELECT monitored set the sound to be during playback at the HEADPHONES jack and EARPHONE jack. CH 1/2: Sound of CH1 and CH2 CH 3/4: Sound of CH3 and CH4 2 Use the PHONE LEVEL control to adjust the output audio level. Connect the external signal, to which playback is to be synchronized, to the VIDEO IN connector, and set the video input selector switch to the VIDEO IN position. Playback is now initiated in synchronization with the signal which is connected to the VIDEO IN connector. <Notes> O If the VIDEO IN connector's signal is disconnected and re-connected during playback, the playback picture may be disturbed. O It is recommended that a signal complying with the RS-170A standard be used as the reference signal for playback. 33 Playback Playback Operations 1. Playback at the regular speed and still-picture playback <Notes> O The PLAY PAUSE mode retention time can be set using setup menu item No. When HALF has been selected as the setup menu item No. 401 setting, the tape is unloaded, and the standby OFF (half-loading) mode is established. O Noise may appear on the still picture when the PAUSE/STILL button is pressed during playback. O A still picture can be shown on the monitor in the STOP mode by selecting PB as the setup menu item No. When the unit is used as a player, the playback picture can be made to appear more quickly by selecting PB as the setup menu item No. It is recommended that PB be selected as the setup menu item No. [. . . ] However, the main unit will be put into Enforced Recording mode and recording will continue. ° 1) During recording ° 2) At any time except during recording ° 3) Once a second when SIMPLE has been selected as the setup menu item No. ° 4) The alarm can be switched to ON or OFF using the alarm setup menu items No. ° 5) RF warning display will flash during REC and REC PAUSE modes. When the unit changes from REC and REC PAUSE modes, the RF warning display will turn off. The warning system's priority sequence is as follows. 1 2 3 4 5 SLACK BATTERY END TAPE END HUMID NO RF 6 7 8 9 10 SERVO LOW RF HIGH ERROR RATE BATTERY NEAR END TAPE NEAR END 58 Connector Signals CAMERA connector (26-pin) Pin No. [. . . ]