User manual PANASONIC AJ-HD1700

[. . . ] Digital HD Video Cassette Recorder Operating Instructions Model AJP E Thank you for purchasing this product. Before operating this product, please read the instructions carefully and save this manual for future use. VQT0E88 For your safety (General) WARNING: · TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. · TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, KEEP THIS EQUIPMENT AWAY FROM ALL LIQUIDS--USE AND STORE ONLY IN LOCATIONS WHICH ARE NOT EXPOSED TO THE RISK OF DRIPPING OR SPLASHING LIQUIDS, AND DO NOT PLACE ANY LIQUID CONTAINERS ON TOP OF THE EQUIPMENT. THIS APPARATUS MUST BE GROUNDED To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power outlet (socket) which is effectively grounded through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connection to the ground. [. . . ] For transferring to the still picture (STILL) mode. For returning TC SOURCE to the previous EXT mode. (No switching occurs if the EXT mode is currently established. ) For switching TC SOURCE to INT and TCG MODE to AUTO. For switching TC SOURCE to EXT_L and TCG MODE to REGEN. 3. Selecting the menu item Turn the ADJ dial and select the menu item for the pin of the 50-pin connector which was selected in step 1 above. 4. Entering the menu item Press the ADJ dial. The on-screen setting display now blinks. 5. Selecting the setting Turn the ADJ dial and select the setting for the menu item which was selected in step 3 above. 6. Entering the setting Press the ADJ dial. What is to be operated by the ADJ dial returns to the front panel. Whatever was selected in step 3 is displayed as the registered item name and whatever was selected in step 5 is displayed as the registered value. B05 IN SET B06 STILL B07 422 REM ON B08 422 REM OFF B09 TC EXT 7. To select menu items and settings for other 50-pin connector pins, repeat steps 1 to 6. 8. Saving the data in the 50-pin registration file To save what has been set in the 50-pin connector in the 50-pin registration file, press F5 (SET). If F6 (EXIT) is pressed without the above settings have been saved, those settings will be canceled. B10 TC INT AUTO B11 TC EXT_L REG Clearing 1. Turn the ADJ dial to move the selection marker and select the pin of the 50-pin connector whose menu item is to be cleared. SRC PROTECT and STOP PROTECT settings switched simultaneously B20 PROTECT HALF For switching the tape protection mode operation to half-loading in the event that the VTR has been left standing in the STOP mode or the STILL mode while any of the search modes (JOG, VAR or SHTL) was established. For switching the tape protection mode operation to tension release when the VTR has been left standing in the STOP mode or the STILL mode while any of the search modes (JOG, VAR or SHTL) was established. 2. The registered item name and registered value displays now go blank. 3. To clear the menu items in other 50-pin connector pins, repeat steps 1 and 2. B21 PROTECT T-REL 4. To save what has been set in the 50-pin connector in the 50-pin registration file, press F5 (SET). If F6 (EXIT) is pressed without the above settings have been saved, those settings will be canceled. 73 Function menus <50P IN/OUT ASSIGN> Special IN menu list (continued) No. SUPER DISPLAY Description of setting No. SUPER DISPLAY C16 DC3 C17 UC1 C18 UC2 C19 UD1 C20 UD2 C21 UD3 C22 ERR0 C23 ERR1 C24 ERR2 C26 CH GREEN C27 CH AMBER C28 CH RED C29 SERVO LOCK C30 V UNITY C31 A UNITY Description of setting Down-conversion status 3 Up-conversion status 1 Up-conversion status 2 Up-conversion/down-conversion status 1 Up-conversion/down-conversion status 2 Up-conversion/down-conversion status 3 Error status 0 Error status 1 Error status 2 Channel condition green LED Channel condition amber LED Channel condition red LED Servo lock LED Video UNITY LED Audio UNITY LED UPCON MODE and DOWNCON MODE settings switched simultaneously B22 UD FIT_V B23 UD FIT_H B24 UD FIT_HV For switching the picture angle during down-conversion to letter box and the picture angle during up-conversion to the top/bottom cut status in the vertical direction. [. . . ] SW1 What is set AUDIO INPUT IMPEDANCE SW This sets the CH1 audio input impedance. HIGH/600TM SW101 AUDIO INPUT IMPEDANCE SW This sets the CH2 audio input impedance. HIGH/600TM SW201 AUDIO INPUT IMPEDANCE SW This sets the CH3 audio input impedance. HIGH/600TM SW301 AUDIO INPUT IMPEDANCE SW This sets the CH4 audio input impedance. [. . . ]