User manual PANASONIC AJ-D810P

[. . . ] Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 2 IMPORTANT "Unauthorized recording of copyrighted television programs, video tapes and other materials may infringe the right of copyright owners and be contrary to copyright laws. " CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Menu Selection Screen Pattern 1 1 2 3 4 5 C1CI00 0:00:0(T1 H LP01 00:00 CL) RW E F:LPF:AUF:D 1CI 2MN 3HD F:O 4 L G F : A N4 5MI 6 7 8 9 : = Menu Selection Screen Pattern 1 6 [F1] CLIP When the [F1] button is pressed, the CLIP display screen is shown. See the CLIP display screen for details. 7 [F2] MANU When the [F2] button is pressed, the simplified manual operation screen is shown. See the simplified manual operation screen for details. 8 [F3] HDD When the [F3] button is pressed, the HDD status display screen is shown. See the HDD status display screen for details. 9 [F4] LOG When the [F4] button is pressed, the error log display screen is shown. See the error log display screen for details. Menu Selection Screen Pattern 2 1 2 3 F:H 2C > 4 5 RW E : < 3 C1CI00 0:00:0(T1 H LP01 00:00 CL) F:N 1ED ; ?@ F:OFF:E. F:AN 3CN 4VR 5MI Displays common to the 2 patterns The contents from 1 to 5 are the same as for the main screen. : [F5] MAIN When the [F5] button is pressed, main screen pattern 1 is restored. < Previous pattern display Shows that there is a screen pattern to display. When the [SET] button is pressed, the settings are incorporated. When the settings have been incorporated, the changes are shown at 4. If the settings cannot be incorporated for some reason or other, "STATUS SET FAILED" is displayed at 4. When the [CANCEL] button is pressed, menu selection screen pattern 2 is restored. $ Shutdown Screen The main unit is shut down by the shutdown method selected with the shutdown setting screen. SUDW HTON Wi ammn, pes at oet lae 1 7 SUDW HTON I i nwsf t tr of tso ae o un f 1 Progress status display <Wait a moment, please>: Currently processing <It is now safe to turn off>: Processing has been completed. <Note> Turn off the power only after <It is now safe to turn off> has been displayed. 21 Display Panel $ Parameter Setting Screen Each parameter required by the unit is set. C1CI00 0:00:0(T1 H LP01 00:00 CL) SO TP UE E] 00SLC 0 EET C N I T P 2[ S R S T 1 OFG YE 7. When the USER SET parameter has been changed, one of the following screens will be displayed. Press the [SET] button to restart the system. If the USER SET parameter has not been changed, the system will return to Main Screen Pattern 1. CagdCn!D [EVRRBO] hne of o SRE EOT STo CNE E r ACL 1. Then screen for selection of CONFIG TYPE is shown. CONFIG TYPE is selected with cursor button [!] or [1]. USER SET 7 A/S SET If the parameter does not need to be changed, press the [CANCEL] button. [. . . ] Place spacers between them, and attach them together with a total of eight screws in the four places indicated. Install the SDI I/O board and analog out board in the server. Perform the connections as illustrated below. Analog out panel (packed together with optional board) VIDEO OUT AUDIO OUT VIDEO IN SDI/SDTI IN ANALOG DIGITAL OUT REMOTE IN OUT Rear panel connectors (designated channel) Orange Black AUDIO OUT Red VIDEO OUT Analog out board S-IN S-IN THROUGH S-OUT SDI I/O board 35 Optional HDD <Warning> O The optional HDD (AJ-HDD36P) is exclusively for the unit (AJ-D810P). Do not use it for any other applications. [. . . ]