User manual PANASONIC AJ-DE97

[. . . ] Non-Linear Editing System AJ- P Operating Instructions This manual contains information on the hardware only. For details on video and audio uploading, editing and other operations, refer to the Reference Manual (AJ-SF97). IMPORTANT "Unauthorized recording of copyrighted television programs, video tapes and other materials may infringe the right of copyright owners and be contrary to copyright laws. " CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. [. . . ] Symptoms related to personal computer monitor Symptom Suggested remedial action $ Nothing at all appears on the O First, check whether the monitor is a PC/AT compatible monitor. monitor screen or the "NO SIGNAL" or other warning display appears. O When nothing at all appears, check the supply voltage, connecting cables (for disconnections) and monitor unit settings. O Some monitors have their own self-diagnosis functions. If you feel that the monitor unit is responsible for the trouble, refer to the manual accompanying the monitor, and check the adjustment and test methods. O If you still cannot trace the cause of the problem, try replacing the troubled monitor with a monitor whose operation is trouble-free if such a monitor is at hand. $ The display keeps running off the O Check the monitor's resolution setting. This product's default resolution setting is 1152a870, and its default monitor screen. These settings may not display properly on some monitors. Refer to the manual accompanying the monitor, and check its available resolution settings. O If you still cannot trace the cause of the problem, refer to the above symptom (Nothing at all appears on the monitor screen or the "NO SIGNAL" or other warning display appears), and check whether the monitor is to blame for the problem. $ The display on the monitor screen O If the monitor is determined by its self-diagnosis function to be is subject to wave-like noise, trouble-free, review the monitor's installation location. distortion or jitter resulting in Trouble may be caused in the monitor display by the adverse affects horizontal or vertical wobbling. of magnetic fields generated by other devices (such as another display, fluorescent light or transformer). In a case like this, turn off the monitor, distance the monitor from the other devices, and turn the power back on. may remain if the monitor is moved while the power is still supplied. ) ­ 21 ­ Troubleshooting Symptoms related to floppy disk drive Symptom Suggested remedial action $ The floppy disk drive's access lamp O Has the product been started up with a floppy disk already inserted in the floppy disk drive?remains lighted or the system fails When its power switch is set to the ON position, this product checks to recognize the floppy disk drive. whether a floppy disk has already been inserted in the floppy disk drive, and it then starts the product. If a floppy disk has not been inserted, startup proceeds from the built-in system hard disk; if a disk has been inserted, the product is started up from the floppy disk drive. For normal use, set the power switch to the ON position while there is no floppy disk in the floppy disk drive: this will ensure that the system starts up properly. O Check out the following points if this problem should occur while a floppy disk has been inserted the floppy disk drive at times other than startup. (Check this using a trouble-free disk. ) 2. Does the editing application program lock up or does some other software problem occur at the same time? ­ 22 ­ Troubleshooting Symptoms related to the keyboard or mouse Symptom Suggested remedial action $ All or some of the keys on the O Are you using the keyboard provided with the product?Problems may occur in operation if a keyboard other than the one keyboard fail to function. [. . . ] If an abnormal torque applied to the supply reel motor is STOP detected or if an abnormal current flowing to the current- (POWER OFF 5 ON) sensing resistor is detected, the AUTO OFF lamp lights, and the message display flashes. If the take-up reel motor should rotate at an abnormally STOP fast rate, the AUTO OFF lamp lights, and the message (POWER OFF 5 ON) display flashes. If an abnormal torque applied to the take-up reel motor is STOP detected, the AUTO OFF lamp lights, and the message (POWER OFF 5 ON) display flashes. If the tape has not been wound up during unloading, the STOP AUTO OFF lamp lights, and the message display flashes. [. . . ]