User manual PANASONIC AJ-HD150P

[. . . ] Para la explicación en español, consulte el CD-ROM uministrado. Before operating this product, please read the instructions carefully and save this manual for future use. · AVC-Intra capability is available when the optional AVC-Intra Codec board AJ-YBX200G is installed to the unit. S1207T0 -P D Printed in Japan ENGLISH VQT1Q19 Read this first! For AJ-HD150P THIS EQUIPMENT MUST BE GROUNDED To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power outlet which is effectively grounded through normal household wiring. Extension cords used with the equipment must have three cores and be correctly wired to provide connection to the ground. Wrongly wired extension cords are a major cause of fatalities. [. . . ] 4 Use the cursor buttons to choose [FILE] ­ [APPEND]. 5 Use the cursor buttons to select the number of the P2 card slot containing the play list you want to import and press the SET button. 6 Select a file in the file import screen and press the SET button. The specified play list event is added at the cursor location. Using Play List: Creating Play Lists 77 Saving Play Lists Naming Play Lists Use the steps below to name play lists. Saving a Play List to a P2 Card Use the steps below to save a play list stored by the unit in the play list area of memory to a P2 card. 1 Open the play list screen. 3 Use the cursor buttons to choose [OPERATION] ­ [CHANGE PLAYLIST NAME] and press the SET button. 1 Open the play list screen. 3 Use the cursor buttons to choose [FILE] ­ [SAVE AS]. 4 Use the on-screen keyboard to enter a name and press OK. 4 Use the cursor buttons to select the number of the P2 card slot that will store the file and press the SET button 5 Check the file name in the save file screen, choose [YES] and press the SET button. 5 Close the menu and register the name in PLAYLIST NAME. NOTE: · The file name must be saved using [FILE] ­ [SAVE] or [FILE] ­ [SAVE AS]. This saves the play list. 78 Using Play List: Saving Play Lists NOTE: · The filename is automatically generated and cannot be changed. Changing the filename on a PC will make it impossible to load. · Updated play list files cannot be loaded by older versions or devices. Store old versions of the play list in the unit before using them. They cannot be edited in the form they are loaded. Using Play List: Saving Play Lists 79 Using Play List Editing Play Lists Play lists can be edited in a number of different ways. Opening an Existing Play List File Open the play list screen to view the play list in the play list area of memory in this unit. The procedure below describes how to load a play list stored on a P2 card or SD memory card to replace the play list in the play list area of memory in this unit. 6 Select [YES] in the confirmation screen and press the SET button 1 Open the play list screen. 3 Use the cursor buttons to choose [FILE] ­ [OPEN]. The play list is now loaded. NOTE: · If a play list file that contains more than 100 events is opened, the event data exceeding 100 is not imported and the play list becomed a read-only file. · Play lists created on the AJ-SPD850 cannot be directly edited on this unit and open as read-only files. · An event with an EXTRA track cannot be modified. Delete the EXTRA track before modifying the event. · The IN, OUT and SPLIT buttons allow you to use the TRIM+/­ button for trimming in the event register screen when the time code is displayed. Changing Event Order You can move and change the order of play list events. NOTE: · To quickly select successive lines Hold down the SHIFT button and press the SET button (MULTI SEL) to select all events from the previous time the SET button 1 was pressed and up to the cursor location where the MULTI SEL button was pressed. · To cancel a selection Place the cursor on a selected event and press the SET button to cancel the selection. · To cancel all selections Hold down the SHIFT button and press the EXIT button (CANCEL) to cancel all selected lines. 3 Use the cursor buttons to select a destination. 2, 3 4 4 Hold down the SHIFT button and press the GO TO button. 1 Open the play list screen. 2 Select the event you want to move and press the SET button. The selected event moves to the location right before the cursor and the events at the cursor location move downwards. NOTE: · It is not possible to move only the event if that event contains an The event is selected and appears in blue. This procedure can be repeated as necessary to select multiple events. EXTRA track. Move the event and the EXTRA track. 82 Using Play List: Editing Play Lists Deleting Events You can use the following procedure to delete events in the play list. · It is not possible to delete only the event if that event contains an EXTRA track. Delete the EXTRA track before deleting the event, or delete the event and the EXTRA track. · If there is an EXTRA event that span multiple events, and when events beyond a certain event in a play list are no longer needed, use the following steps to delete such events. 1 1. DUB button to copy audio to the EXTRA track. [. . . ] 78 DELETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 OPERATION DELETE ALL EVENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 DELETE SELECTED EVENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 APPEND SELECTED CLIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]