User manual PANASONIC AJ-HPM100

[. . . ] Operating Instructions Memory Card Portable Recorder/Player Model No. Model No. AJ-HPM100P AJ-HPM100E DEUTSCH FRANÇAIS ITALIANO ESPAÑOL Für Erlauterungen in Deutsch, konsultieren Sie bitte die mitgelieferte CD-ROM. Pour des explications en français, veuillez vous reporter au CD-ROM fourni. Per le istruzioni in italiano, vedere il CD-ROM in dotazione. Para la explicación en español, consulte el CD-ROM uministrado. Before operating this product, please read the instructions carefully and save this manual for future use. [. . . ] The OUT point is incremented or decremented in frame increments (in 4-frame increments at 24PN). Press the ENTRY button to finalize. 5 Change the SPLIT point 2 3 3, 4, 5 4 5 Hold down the SPLIT button and press the TRIM+ or the TRIM­ button. The split point is incremented or decremented in frame increments (in 4-frame increments at 24PN). Press the ENTRY button to finalize. 1 Open the play list screen. 2 Select the event you want to change. Using Play List: Editing Play Lists 75 NOTE: · Pressing the following buttons will also finalize a change. · Performing any of the following operations will discard the changes and make you return to the play list screen. - Holding down the SHIFT button and pressing the EXIT button. - Pressing the PLAY LIST button. · You cannot make changes that go beyond the start and end points of a clip. · You cannot make changes that reverse the IN and OUT point locations. · An event with an EXTRA track cannot be modified. Delete the EXTRA track before modifying the event. · The IN, OUT and SPLIT buttons allow you to use the TRIM+/­ button for trimming in the event register screen when the time code is displayed. Changing Event Order You can move and change the order of play list events. NOTE: · To quickly select successive lines Hold down the SHIFT button and press the SET button (MULTI SEL) to select all events from the previous time the SET button 1 was pressed and up to the cursor location where the MULTI SEL button was pressed. · To cancel a selection Place the cursor on a selected event and press the SET button to cancel the selection. · To cancel all selections Hold down the SHIFT button and press the EXIT button (CANCEL) to cancel all selected lines. 3 Use the cursor buttons to select a destination. 2, 3 4 4 Hold down the SHIFT button and press the GO TO button. 1 Open the play list screen. 2 Select the event you want to move and press the SET button. The selected event moves to the location right before the cursor and the events at the cursor location move downwards. NOTE: · It is not possible to move only the event if that event contains an The event is selected and appears in blue. This procedure can be repeated as necessary to select multiple events. EXTRA track. Move the event and the EXTRA track. 76 Using Play List: Editing Play Lists Deleting Events You can use the following procedure to delete events in the play list. · It is not possible to delete only the event if that event contains an EXTRA track. Delete the EXTRA track before deleting the event, or delete the event and the EXTRA track. · If there is an EXTRA event that span multiple events, and when events beyond a certain event in a play list are no longer needed, use the following steps to delete such events. 1 1. Since the events become separated from the copied portion, select the latter part of the EXTRA event and delete it. Select the events and delete them. Using Play List To Delete All Events The OPERATION menu allows you to delete all events. 1 Open the play list screen. 2, 3 4 2 Press the MENU button. 3 Use the cursor buttons to choose [OPERATION] ­ [DELETE ALL EVENT]. 1 Open the play list screen. [. . . ] * This file contains the data for the last clip recorded on a P2 device. · Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. · Apple and Macintosh are registered trademarks or trademarks of Apple, Inc. in the United States and/or other countries. 148 For Long and Trouble-Free Operation: Handling P2 Card Recording Specifications GENERAL Power supply: 100-240 V AC, 50/60 Hz, 60 W 12 V DC, 4. 3 A (full options) Recording times: Card model Number of Cards Recording format DVCPRO audio) DVCPRO channel audio) AVCIntra50 audio)* AJP2C004 HG 6 1 6 1 6 1 approx. 32 minutes minutes DVCPRO HD (8channel audio) AVCIntra100 audio)* approx. [. . . ]