User manual PANASONIC AJ-HPX2000

[. . . ] Operating Instructions Memory Card Camera-Recorder Model No. AJ-HPX2000P Before operating this product, please read the insructions carefully and save this manual for future use. To use AVC-Intra, the AVC-Intra codec board (AJ-YBX200G/optional) must be installed. F1206T1077 -F @ Printed in Japan ENGLISH VQT1D27-1 Read this first! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Slide the camera forward along the grooves until you hear a "click". Preparation Mounting the Camera on a Tripod 105 Attaching the Shoulder Strap To detach the shoulder strap, first open the hooks, then detach the strap. Shoulder Strap Note Make sure that the shoulder strap is securely attached. Press to open the Attaching the Rain Cover When using the SHAN-RC700 Rain Cover Tighten the cord Secure with the surface fastener Secure with the surface fastener 106 Preparation Attaching the Shoulder Strap Connection of the remote control unit (AJ-RC10G) It is possible to control some of the functions remotely by connecting the remote control unit AJ-RC10G (optional accessory). When AJ-RC10G is connected to the REMOTE connector on the unit and the power switches of both of the unit and AJ-RC10G are turned on, the unit automatically enters the remote control mode. The remote control mode is released when AJ-RC10G is removed or the power for the AJ-RC10G is turned OFF. Recording and playback Operations in the remote control mode When the remote control is connected, recording and playback can be controlled through both the camerarecorder and the AJ-RC10G. Notes The state that was adjusted by connecting AJ-RC10G is stored in the unit. Not to store the adjusted state in the unit, open the FUNCTION MENU of AJ-RC10G to set the RC DATA SAVE item to "OFF". When the dedicated cable is connected or removed, ensure that the POWER switches on both the main unit and AJ-RC10G are turned "OFF". Preparation Switch functions in the remote control mode In the remote control mode, the following switches and buttons on the unit are disabled. SHUTTER switch MENU button JOG dial button GAIN switch OUTPUT/AUTO KNEE switch WHITE BAL switch USER MAIN button USER 1 button USER 2 button Dedicated cable AJ-RC10G REMOTE connector Attaching the Front Audio Level Control Knob If you use the Front Audio Level control frequently, attach the accessory knob so that it can be easily operated. Front Audio Level Control Knob (Accessory) Screw (Accessory) Screw Marks Remove the screw in the center of the Front Audio Level control, and attach the accessory knob using the screw (included). When attaching the knob, be sure to align the marks on the control with the marks on the knob. Preparation Connection of the remote control unit (AJ-RC10G) 107 Connection of the external switch It is possible to draw 1. 5 A current from the DC OUT connector of the unit. REC start/stop can be controlled by connecting an external switch to this connector. Since a tally lamp can be used by connecting an LED to this connector, it is useful for shooting video when fixing the camera on a crane. DC OUT connector 4 3 1 2 Connector at the cable side HR10A-7R-4P(73) (Hirose Denki) LED Resistance Max. 50 mA REC start/stop 1: GND 2: TALLY OUT Open collector output on the unit side TALLY ON Low impedance High impedance TALLY OFF 3: REC start/stop switch This is connected in parallel to the REC START button on the unit or the VTR button on the lens 4: +12 V 108 Preparation Connection of the external switch Manipulating Clips with Thumbnails A clip is a data group that includes the images and voices created from one shooting session, together with additional information such as text memos and meta data. The following manipulations can be performed using the cursor and SET buttons, while checking the images displayed on the LCD monitor: Playback, delete, copy or restore the clip. Add or delete a shot mark and a text memo on the clip thumbnail. Copy part of a clip by using the test memo. Uploading and editing clip metadata from the SD memory card Thumbnail Manipulations Overview Thumbnail screens are configured as follows: Manipulating Clips with Thumbnails THUMBNAIL OPERATION PROPERTY ALL CLIP SAME FORMAT CLIPS SELECTED CLIPS MARKED CLIPS TEXT MEMO CLIPS DELETE FORMAT REPAIR CLIP RE-CONNECTION COPY EXCH. THUMBNAIL DEVICE SETUP EXIT CLIP PROPERTY CARD STATUS SLOT CLIPS SETUP EXIT ALL HIDE MARKER IND. DATA DISPLAY DATE FORMAT THUMBNAIL SIZE THUMBNAIL INIT EXIT DEVICES PROPERTY SETUP EXIT META DATA LOAD RECORD USER CLIP NAME INITIALIZE PROPERTY EXIT HDD EXPORT EXPLORE FORMAT SETUP EXIT Manipulating Clips with Thumbnails : Thumbnail Manipulations Overview 109 Thumbnail Screen Press the THUMBNAIL button to display the thumbnail screen on the LCD monitor. Pressing the THUMBNAIL button again returns the display to the regular display. When switching is done from the regular screen display to the thumbnail screen display, all the clips will be displayed on the thumbnail screen. Pressing the MENU button allows you to navigate the thumbnail menu. 1. Display Mode The type of the thumbnail indicated on the display and the types of the other information screens are indicated. SAME FORMAT: The clips in the same format as the system format are shown. SELECT:The clips selected with the SET button are shown. [. . . ] BNCa1, 0. 8 VP-P, 75 h (HD/SD-SDI input board AJ-YA350AG is attached. ) HD: Compliant with the SMPTE292M/ 296M/299M standards SD: Compliant with the SMPTE259MC/272M-A/ITU-R. BT656-4 standards AUDIO IN CH1/CH2: XLR a 2, 3 pins LINE, MIC, and +48 V switch-selectable LINE: +4 dBu (­3 dBu/0 dBu/+4 dBu selectable with menu) ­60 dBu (­60 dBu/­50 dBu MIC: selectable with menu) MIC + 48V: Compatible with +48V phantom power supply ­60 dBu (­60 dBu/­50 dBu selectable with menu) MIC IN: XLR a 1, 5 pins +48 V phantom: ON/OFF selectable with menu ­40 dBu (­50 dBu/­40 dBu selectable with menu) WIRELESS IN: 25 pin D-SUB, ­40 dBu AUDIO OUT CH1/CH2: XLR a 1, 5 pins, +4 dBu (­3 dBu/0 dBu/+4 dBu selectable with menu) Balanced low-impedance output Headphones : Stereo mini jack a 2 DC IN: XLR a 1, 4 pins, DC 12 V (DC 11 V - 17 V) DC OUT: 4 pins, DC 12 V (DC 11 V - 17 V) Maximum rated current: 1. 5 A LENS: 12 pins EVF: 20 pins REMOTE: 10 pins (connector for AJ-RC10G) GPS: 6 pins (connector for AJ-GPS910G) USB version 2. 0 : HOST: 4-pin, Type-A connector DEVICE: 4-pin, Type-B connector MON OUT: VIDEO OUT : TC IN: TC OUT: DVCPRO/DV : SDI-IN : Accessories Shoulder Strap Front Audio Level control knob Control knob mounting screwa1 CD-ROM Operating Instructions Weight and dimentions when shown are approximately. Specifications are subject to change without notice. 192 Specifications Software information for this product 1. Customer advisory: This product includes software licensed under the GNU General Public License (GPL) and GNU Lesser General Public License (LGPL); customers have the right to download, modify, and redistribute source code for this software. Descriptions of the GPL and LGPL are stored on the installation CD included with this camera-recorder. (The description is the original (written in English)). [. . . ]