User manual PANASONIC AJHPX3700G

[. . . ] This product is eligible for the P2HD 5 Year Warranty Repair Program. For details, see page 7. Operating Instructions Memory Card Camera-Recorder Model No. AJ-HPX3700G Before operating this product, please read the instructions carefully and save this manual for future use. F1008T0 -F [D] Printed in Japan ENGLISH VQT1V68 Read this first! Declaration of Conformity CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. Model Number: AJ-HPX3700G Trade Name: PANASONIC Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support contact: Panasonic Broadcast & Television Systems Company 1-800-524-1448 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] The setting menu is cleared, and the displays showing the unit's current statuses appear at the top and bottom of the viewfinder screen. 4 5 Press the jog dial button to enter the file number. Turn the jog dial button to move the arrow (cursor) to the READ item. 102 Adjustments and Settings for Recording: Handling data To write in and read out the lens file to/from the SD memory card The contents of the 8 lens files stored in the unit's internal memory can be saved onto an SD memory card as card files under a single title. A total of 8 titles can be saved on an SD memory card. Furthermore, the 8 lens files saved under one title on an SD memory card can be loaded into the unit's internal memory. The correlation between the lens files stored in the internal memory and lens files saved on an SD memory card is shown below. Saving lens files on the SD memory card Select the card file No. 1 Using menu operations, open the <LENS FILE CARD R/W> screen from the FILE page. When the message "FORMAT ERROR" appears in the upper right corner, format the SD memory card with the unit. SD cards can be formatted through the CARD CONFIG menu option on the <SD CARD READ/ WRITE> screen. For more information, see [Handling SD memory cards] (page 92). Turn the jog dial button to move the arrow (cursor) to the CARD FILE SELECT item. Press the jog dial button and the card file number will flash. Turn the jog dial button to select the file (1 to 8) to be recorded. Adjustments and Settings for Recording 2 Internal memory 64 lens files Up to 64 sets of the lens file can be stored in the built-in memory. 3 Card files Title 1 Title 2 The contents of 8 lens files can be saved onto an SD memory card as card files under one title or they can be loaded from the SD memory card. Title 3 Title 4 4 Title 5 Title 6 Title 7 Title 8 Press the jog dial button to enter the file number. Give a title to the selected card file. 5 Turn the jog dial button to move the arrow (cursor) to the TITLE item. A total of 64 lens files (8 lens files memory card. 8 titles) can be saved on an SD 6 When the jog dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established. Now perform step 7 on page 101 through step 15 on page 102. Adjustments and Settings for Recording: Handling data 103 Loading lens files from the SD memory card 1 2 3 Using menu operations, open the <LENS FILE CARD R/W> screen from the FILE page. Turn the jog dial button to move the arrow (cursor) to the CARD FILE SELECT item. Press the jog dial button and the card file number will flash. Turn the jog dial button to select the file (1 to 8) to be read. 4 Press the jog dial button to enter the file number. Now perform steps 5 through 8 on page 102. Note The card file titles on the SD memory card are displayed on the <LENS FILE CARD R/W> screen, but the titles of the lens files contained in the card files are not shown on this screen. To display these titles, load the files, and check the titles on the <LENS FILE> screen. The lens files in the unit's internal memory will be rewritten as the loaded lens files at this time. For this reason, save the lens files in the internal memory onto the SD memory card first to back them up before loading them on the SD memory card. 104 Adjustments and Settings for Recording: Handling data Chromatic Aberration Compensation (CAC) CAC is a function that automatically corrects registration errors mainly caused by slight chromatic aberration, which cannot be corrected with lenses, and minimizes color weepage on the images. What is the chromatic aberration? Chromatic aberration means magnification ratio chromatic aberration. Magnification ratio chromatic aberration is caused by differences in the red (R), green (G), and blue (B) refractive indexes of a lens. The lens itself corrects chromatic aberration but the astigmatism remains in the surrounding area in particular. The zooming ratio, iris, and focal distance involves complicated chromatic aberration phenomena in a zoom lens. Images have registration errors. CAC operation For the 4 lenses listed on the left 1 2 3 Install the lens on the unit and connect the lens connector. Open the <CAC ADJ> screen on the MAINTENANCE page. [. . . ] The recording time may be shorter, depending on the number of shots recorded. For the latest information on P2 cards not available in the operating Instructions, visit the P2 Support Desk at the following Web sites. https://eww. pavc. panasonic. co. jp/pro-av/ Specifications 209 Specifications Input/output Unit GENLOCK IN: BNC 1, 1. 0 VP-P, 75 (This is available as the return video input connector. ) MON OUT: BNC 1 (It can be switched among HD SDI/VBS. ) HD SDI: 0. 8 VP-P, 75 (Compliant with the SMPTE292M/ 299M standards) VBS: 1. 0 VP-P, 75 HD SDI A: BNC 1 HD SDI: 0. 8 VP-P, 75 (Compliant with the SMPTE292M/ 299M/372M/352M standards) Dual Link with HD SDI B supported HD SDI B: BNC 1 HD SDI: 0. 8 VP-P, 75 (Compliant with the SMPTE292M/ 299M/372M/352M standards) Dual Link with HD SDI A supported TC IN: BNC 1, 0. 5 VP-P to 8 VP-P, 10 k TC OUT: BNC 1, 2. 0±0. 5 VP-P, low impedance AUDIO IN CH1/CH2: XLR 2, 3 pins LINE, MIC, and +48 V switch-selectable LINE: +4 dBu (­3 dBu/0 dBu/+4 dBu selectable with menu) MIC: ­60 dBu (­60 dBu/­50 dBu selectable with menu) MIC +48 V: Compatible with +48 V phantom power supply ­60 dBu (­60 dBu/­50 dBu selectable with menu) MIC IN: XLR 1, 5 pins +48 V phantom (on/off selectable with menu) ­40 dBu (­50 dBu/­40 dBu selectable with menu) WIRELESS IN: 25 pin, D-SUB, ­40 dBu AUDIO OUT CH1/CH2: XLR 1, 5 pins, +4 dBu (­3 dBu/0 dBu/+4 dBu selectable with menu) Balanced low-impedance output Headphones: Stereo mini jack 2 DC IN: XLR 1, 4 pins, DC 12 V (DC 11. 0 V to 17. 0 V) DC OUT: 4 pins, DC 12 V (DC 11. 0 V to 17. 0 V) Maximum rated current: 1. 5 A LENS: 12 pins EVF: 20 pins REMOTE: 10 pins (connector for AJ-RC10G) GPS: 6 pins (connector for AJ-GPS910G) USB 2. 0 (HOST): Type-A connector, 4-pin, in accordance with USB Ver. 2. 0 USB 2. 0 (DEVICE): Type-B connector, 4-pin, in accordance with USB Ver. [. . . ]