User manual PANASONIC AV-HS300

[. . . ] Operating Instructions Multi-format Live Switcher Model No. AV-HS300G Before operating this product, please read the instructions carefully and save this manual for future use. Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. FCC Note: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] If any of the input signals has been frozen, the freeze status display LED lights. While signals are frozen, the tally signals of the corresponding input will not be output. 1 Press the [FUNC] switch to light its indicator, and then press the [FRZ] switch to display the FRZ menu. 2 Turn [F1] to display the FRZ (/) menu. 3 Turn [F], and select the input video signals using the SIG item. 4 Press the [F4] switch to freeze or de-freeze the input image. If it is pressed when the display shows "OFF", the input image is frozen, and the display shows "ON". If it is pressed when the display shows "ON", the input image is de-frozen, and the display shows "OFF". When the unit is used with the frame synchronizer function OFF, the output images may be disturbed when freezing is executed, but the frozen images will not be adversely affected. The frame synchronizer function will automatically be switched ON. 4 2. Frame memory AUX output signals can be stored in the frame memory for use. Stored images can be used as the bus images by assigning the FMEM signals using the crosspoint assignment process. Images stored in the frame memory are also saved in the unit's flash memory so they can be used even after the power is turned off. Stored images have an 8-bit format so the image quality may appear rough at times. 1 Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu. 3 Press the [F4] switch (EXEC) to store the still images in the frame memory. Images can also be captured into the frame memory from a PC via Ethernet. For details on how to transmit them, refer to "5. Image transmission functions". 5 2. Preset memory Up to 10 panel settings can be stored in this memory. The table below lists the settings which are stored. <Table of stored preset memory> Item Crosspoint Description of setting A bus B bus KEY-S KEY-F AUX bus Color background Wipe pattern Border width Soft effect width Border color BKGD/KEY selection MIX/WIPE selection Auto transition time (BKGD) Auto transition time (KEY) Key type (TYPE) Key adjustment (ADJ) Initial value (factory default) 1 1 1 1 1 WHITE 4 (center) 0 0 WHT BKGD MIX 30F 30F LIN GAIN: 100 CLIP: 0 DENS: 100 OFF BLE YLW OFF 0, 0, 100 355, 100, 7 50, 100, 9 0, 0, 0 Wipe Transition area Key User color Invert ON/OFF Fill color Edge color Edge ON/OFF (TYPE) Edge width User color 1 (HUE, SAT, LUM) User color (HUE, SAT, LUM) User color 3 (HUE, SAT, LUM) User color 4 (HUE, SAT, LUM) The data stored in the preset memory will not be initialized even when initializing is performed. STORE: This is used to store the panel settings in the preset memory. 1 Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu. 2 Turn [F], select "STOR" using the MODE item, turn [F3], and set the preset memory number using the NO. [. . . ] A video effect device which combines a number of video signals to create mix, wipe, key and other video signals. The picture-changing effect produced by overlapping one image with the next. It is also referred to as "dissolve". The function for checking ahead of time the image which will be output after the next transition. [. . . ]