User manual PANASONIC AVHS400N

[. . . ] Operating Instructions Multi-format Live Switcher Model No. AV-HS400N Multi-format Live Switcher AV-HS400 PAGE 1 TIME 4 2 WIPE 5 CHR KEY 3 COLOR 6 FREEZE WIPE SL SQ 3D Z ON POWER ALARM F1 AMB:FILL / GRN:SOURCE KEY BKGD PATT POSITIONER F2 F3 F4 F5 7 DSK 10 8 PinP 9 IN/OUT 12 KEY PATT 11 KEY DSK PinP AUX BUS DELEGATION AUX CLN PVW AUX SOURCE PGM 1 USER 2 MEMORY XPT SYSTEM WIPE PATTERN / FUNCTION FUNC N/R R WIPE DIRECTION MIX AUX WIPE FTB ON PGM/A 1 2 3 4 5 6 7 8 9 10 BKGD KEY MIX WIPE PinP PST/B CUT AUTO DSK Before operating this product, please read the instructions carefully and save this manual for future use. Printed in Japan VQTB0308-2 Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. FCC Note: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] On the TIME menu, turn [F1] to display the DSK sub menu. As with a background transition, set the transition time. 2 When the [DSK] button in the transition area is pressed, the DSK image is combined (fade-in) for the transition time which was set. During fade-in, the indicator of the [DSK] button blinks in red, and it lights in red when the transition (fade-in) is completed. If the [DSK] button is pressed with the DSK picture completely faded in, the DSK image transition (fade-out) is executed. During fade-out, the indicator of the [DSK] button lights in red, and it goes off when the transition is completed. If the [DSK] button is pressed during the transition, the transition direction is reversed. 3-5-4. DSK preview The user can select whether to output the DSK preview image to the preview output. On the DSK sub menu, turn [F5] to set the PVW item. On: The image with the DSK effect added is output to the preview output. Off: The image with no DSK effect added is output to the preview output. PVW On and Off can be allocated to the user buttons. DSK adjustments The DSK definition can be adjusted. 1 Press the [FUNC] button to light its indicator, and press the [DSK] button to display the DSK menu. 2 Turn [F1] to display the Adjust sub menu. <Menu display> Adjust 2/5 Clip 0. 0 Gain Density Invert 100. 0 100. 0 Off 3 Turn [F2], [F3] and [F4] to adjust the DSK (downstream key) definition. Operation F2 F3 F4 F5 Parameter Clip Gain Density Invert Key amplitude Key density Key signal inversion Setting Reference level for generating key signals Setting range 0. 0 to 108. 0 0. 0 to 200. 0 0. 0 to 100. 0 On, Off 43 3. DSK decorations A shadow or other type of edge can be added to DSK. Setting the edge 1 Press the [FUNC] button to light its indicator, and press the [DSK] button to display the DSK menu. 2 Turn [F1] to display the Edge sub menu. <Menu display> Edge 4/5 Type Off Drop Shadow Width 2 0~4 3 Turn [F2] to select the type of edge. The direction is at the bottom right of the key only. The direction is at the bottom right of the key only. [. . . ] This function enables settings to be performed on the menu screens which are displayed in the monitor output. This function combines a sub screen image with the background image. The function for checking ahead of time the image which will be output after the next transition. The image is output from the PVW system. [. . . ]