User manual PANASONIC AVHS450N

[. . . ] Operating Instructions Multi-format Live Switcher Model No. AV-HS450N OFF POWER1 ON POWER1 Mainframe [AV-HS450U1N] ALARM1 OFF POWER2 ON POWER2 ALARM2 Multi-format Live Switcher AV-HS450 Multi-format Live Switcher AV-HS450 POWER ALARM Control panel [AV-HS450C1N] Before operating this product, please read the instructions carefully and save this manual for future use. Printed in Japan 3TR006327AAC Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. FCC Note: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] The button of the pressed number key goes off. soon as the stored operations are deleted, the [UNDO] button becomes operable and lights in amber. If As the [UNDO] button is pressed while it is lighted, the status before the stored operation was deleted will be restored. The [CAM MEM] button deletes specified preset numbers registered in the pan-tilt heads. When the [CAM MEM] button is selected, the [UNDO] button will have no effect so it will not light. exit memory delete, press the [DEL] button or [SHOT MEM] button. Effect dissolve Switching from the current image to the image or operation stored in the SHOT memory can be performed smoothly. For the items targeted by effect dissolve, refer to the SHOT memory items in "3-10-1. Memory registration and recall items". Press the [SHOT MEM] button, and then press the [RECALL] button. Press number key No. 12 [EFF DSLV] to enable effect dissolve. When the function is enabled, the number key No. 12 [EFF DSLV] lights in amber. Press the number key (1 to 10) containing the stored operation. The switching from the current image to the stored operation recalled by pressing the number key is performed smoothly. The time taken for the change is set on the EFF DSLV sub menu of the TIME menu. <Menu display> TIME 8|TransTime EFF DSLV| 1s| 0~13S |Unit 0f| Frame | Sec| 0~999f Pressed number keys blink in green (or in amber with the AW system) while the operation switching is under way. When the operation switching has been completed, the pressed number key lights in amber (or in green with the AW system). When number key No. 12 [EFF DSLV] is pressed at any point during the operation switching, the switching is canceled, and switching is initiated to the operation of the number key that was selected at that instant. During the operation switching, the operation of the fader lever is canceled. During the operation switching, other stored operations cannot be recalled. When initiating PinP1/2 and DSK1/2 transitions, the switching process is not stored in the memory. The number key No. 12 [EFF DSLV] will not light when the [CAM MEM] button is selected, as the operations of the key are disabled. 88 3. [. . . ] PGM, PVW and the input material can be previewed at the same time on a single screen. This function enables settings to be performed on the menu screens which are displayed in the monitor output. This function combines a sub screen image with the background image. Key Edge Key Fill Key Gain Key Invert Key Mask Key Source Linear Key Lum [Luminance] Luminance Key ME [Mix Effect] Mix Multi View Display OSD [On Screen Display] PinP [Picture in Picture] 188 Appendix (glossary) Word PVW [Preview] PGM [Program Bus] PST [Preset Bus] Preset Memory Explanation The function for checking ahead of time the image which will be output after the next transition. The image is output from the PVW system. [. . . ]