User manual PANASONIC AW-AD500A

[. . . ] These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. CAUTION: OKeep the temperature inside the rack to between 41°F to 104°F (5°C to 40°C). [. . . ] "Menu-7 Pw-Off" appears on the LCD panel. Select "Yes" if the power of the camera/pan-tilt head is to be turned off when the telephone line is cut. Select "No" if the power of the camera/pan-tilt head is not to be turned off when the telephone line is cut. 4. Menuj 7 Ye s Pw-Off No 5. When the settings are completed, press the MENU+ key ( 2 i START ) once again to exit the menu settings. 6. 8. 9. Set the power switch on the modem to ON. "Press Start" appears on the LCD panel. 1: Press Start If the modem is not connected correctly, [---] will appear on the LCD panel. 1: jjj Menuj 1 Tx Rx Function Direct <Note> Set the AW-RP605 setting menu (EXT CONTROL OUT) to ON. 2 Select the telephone line. Press the MENU+ key ( 2 i START ) to change the menu setting item. When "Menu-2 Modulate" appears on the LCD panel, STOP use the !START # keys and select Tone or Pulse according to the telephone line to be used. Menuj 2 Modulate To n e P u l s e 7 Connections Receiving system connections $ Connect the pan-tilt head system to the RS-232C CONTROL OUT connector: When an AW-PH300A is used and the connection distance is 10 m or less: Telephone line Modem AW-DU600 AW-CA50A15 AW-PS301 Convertible camera AW-PH300A AW-CA28T9 AW-PS300 When an AW-PH600 is used: Telephone line Modem AW-DU600 AW-PS301 AW-CA50D15 (component) AW-CA50A15 (composite) AW-CH600 AW-CA24U10 P-T CONTROL CAMERA CONTROL AW-PH600 G/L video (BNC cable) Video (BNC cable) AW-PS600 COMPONENT AW-CA16U10 <Note> Refer to the Operating Instructions of the AW-PH600 for details on how to perform the connections for the AW-PH600. 8 Connections $ Connect the pan-tilt head system to the RS-422 CONTROL OUT connector: Use the RS-422 connector when the AW-PH350 is to be used as the pan-tilt head or when the connection distance between this adapter and the pan-tilt head is to exceed 10 m. When an AW-PH350 is used: Telephone line Modem AW-DU600 AW-PS301 AW-CA50C29 (component) AW-CA50T29 (composite) Convertible camera AW-PH350 10 Base-T cable AW-PS300 When an AW-PH300A is used and the connection distance is more than 10 m: Telephone line Modem AW-DU600 AW-PS301 AW-CA50A15 Convertible camera RS-232C/RS-422 converter 10 Base-T cable AC adapter AW-PS300 AW-CA28T9 AW-PH300A 9 Connections When an AW-PH600 is used and the connection distance is more than 10 m: Telephone line Modem AW-DU600 AW-PS301 AW-CA50D15 (component) AW-CA50A15 (composite) AW-CH600 10 Base-T cable RS-232C/RS-422 converter AW-CA24U10 P-T CONTROL CAMERA CONTROL AC adapter G/L video (BNC cable) Video (BNC cable) COMPONENT AW-PS600 AW-CA16U10 AW-PH600 <Note> Refer to the Operating Instructions of the AW-PH600 for details on how to perform the connections for the AW-PH600. 10 Connections Receiving system connection procedure 1. 2. Connect the AW-PS301 AC adapter to the DC 12V IN connector on this adapter. Connect the TO MODEM connector to the RS-232C connector on the modem using the RS-232C cable provided with the modem. START # keys and select RS-2332C or RS-422 according to the pan-tilt head system to be connected. 2 8 4 6 1 7 3 9 5 0 (:): (;): (!): (#): (TELE): (WIDE): (FAR): (NEAR): (BAR): (CAM): Up Down Left Right Zoom in Zoom out Focus (long-distance) Focus (close-up) Color bar output Camera thru output Menuj 5 Output-1 RSj 232C RSj 422 3 Select the pan-tilt head system to be controlled. Press the MENU+ key ( 2 i START ) to change the menu setting item. When "Menu-6 Output-2" appears on the LCD panel, STOP use the !START # keys and select P1, P2, P3, P4 or P5. Menuj 6 Output-2 P1 P2 P3 P4 P5 When the settings are completed, press the MENU+ key ( 2 i START ) once again to exit the menu settings. 4. When the settings are completed, turn the power of the AW-DU600 off and then back on again. The power of the pan-tilt-head system turns on and operation is possible. 14 Connections 2. Control the pan-tilt head system using a control panel or PC: Coaxial cable (5C-2V) 10Base-T cable AW-PS301 Control panel AW-DU600 AW-CA50T29 Convertible camera AW-PS301 10 Base-T cable AW-PH350 AW-PS300 AW-CA50T9 PC AW-PS301 AW-DU600 AW-CA50T29 Convertible camera AW-PH350 10 Base-T cable AW-PS300 <Note> AW-RP605 cannot be used as the control panel with direct mode. 15 Connections Connection procedure 1. 3. Connect the AW-PS301 AC adapter to the DC 12V IN connector on this adapter. Set the control panel selector switch on this adapter to B. 1 Connect the PAN/TILT CONTROL OUT connector on the control panel to the PAN/TILT CONTROL IN connector on this adapter using a 10 BASE-T (equivalent to UTP category 5) straight cable. The connection distance can be extended up to 500 meters. 2 Connect the CAMERA CONTROL OUT connector on the control panel to the CAMERA CONTROL IN connector on this adapter using a coaxial cable (equivalent to 5C-2V). The connection distance can be extended up to 500 meters. [. . . ] RS-232C The RS-232C CONTROL OUT connectors are used. The RS-422 connectors cannot be used in conjunction with these connectors. The RS-422 CONTROL OUT connectors are used. The RS-232C connectors cannot be used in conjunction with these connectors. Menu-5 Output-1 (Initial setting: RS-422) RS-422 $ Dial memory This adapter's dial memory function enables up to 5 specific telephone numbers to be stored. O Using a dial memory to make a call 1. [. . . ]